HP Passport Sign-in

``iLO Not Responding`` Error Appears During POST On ProLiant DL360 G2 Server When Integrated Lights-Out Is Connected To A Linux DHCP Server That Issues WINS IP Addresses

`Next` Button May Not be Available when Custom Installation is Selected for HP Systems Insight Manager (HP SIM) Using the Management CD or Systems Insight Manager Download Pages

`Page Cannot be Displayed `Message Occurs when Running Array Configuration Utility Version 7.15x.0 in Local Application Mode under Microsoft Windows Server 2003 Service Pack 1

`Page Cannot Be Displayed` Message During Port Operational Status Modification Attempt On The HP ProLiant BL p-Class GbE2 Interconnect Switch Running Firmware Version 1.0.0

`Password Is Invalid` Message May Occur When Connecting to a Deployment Server Using the Altiris Boot Disk Image from ProLiant Essentials Rapid Deployment Pack - Windows Edition

`REM Bootwork Unload` Tag Causes The Deployment Job To Stop Responding When Using Bootworks Boot Diskettes With The Rapid Deployment Pack - Windows Edition Release 1.40

`Software is not Installed on the system...` Message is Always Displayed when running HP NC10xx/67xx/77xx/150x/320x Gigabit Server Adapter Online Firmware Upgrade Utility for Windows 2000/Server 2003

`STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL` Message May Be Displayed on a ProLiant Server Configured with a Smart Array 5x or 6x Controller Running Microsoft Windows Server 2003, Enterprise x64 Edition

`Upgrade Failed` Message or Command Prompt Displayed when Attempting to Upgrade ProLiant BL p-Class Server Blade and Power Management Module Firmware using cpqblru On SUSE LINUX Enterprise Server 9

A Fan Status Change Trap Is Sent For Both Fans On A Cisco Gigabit Ethernet Switch Module (CGESM) Even When There Is No Status Change On The Second Fan

ACU and ACU CLI Stop Responding when Using Red Hat Enterprise Linux 4 or SUSE LINUX Enterprise Server 9

Advisory: "98 Address Already in Use: Make_Sock: Could not Bind to Address 2381 . . . " Message Displayed During Upgrade or Downgrade of HP System Management Homepage (HP SMH) for Linux

Advisory: "Conditions for Task Sets" Selection Will Not Execute in Rapid Deployment Pack 3.00 (RDP)- Windows Edition (Japanese Version Only)

Advisory: "Kernel: Your Time Source Seems To Be Instable" May Be Displayed on Console and In /var/log/messages When Running HP System Health Application and Insight Management Agents for Linux

Advisory: "No Device Found That Contains Supplemental Update" Error Message is Displayed on ProLiant Servers Using a Floppy Disk Drive to Administer the Updates with HP Smart Update Manager Version 1.0.0 from the Firmware Maintenance CD Version 7.50

Advisory: "No Device Found that Contains Supplemental Update" Message Displays When Using the Add Supplemental Update Feature on the ProLiant Firmware Maintenance CD Version 7.50 (or later) From a USB Disk Drive

Advisory: "Permission Denied, Console Cannot Be Accessed" Message May Be Displayed When a Virtual Machine is Moved or Copied from VMware ESX Server 3.5 to VMware ESX Server 3.0 using HP Virtual Machine Management Pack

Advisory: "SOAP Response Packet Was Unparseable" Error Message May Be Displayed when Entering Text into the Web-based GUI of the HP c-Class BladeSystem Onboard Administrator with Firmware Version 1.11 (or Earlier)

Advisory: (Revised) HP Insight Power Manager (IPM) - Event of Minor Severity Logged Once Every 24 Hours Against BladeSystem c7000 Enclosures being Monitored by HP Systems Insight Manager (HP SIM)

Advisory: (Revision) "Upgrade ProLiant Firmware" Job Will Not Upgrade the Integrated Lights-Out 2 Firmware to Version 1.22 Using Rapid Deployment Pack - Windows Edition 3.10

Advisory: (Revision) A User Account with Onboard Administrator Privileges Will Receive a "Request Call Time Out" Error When Resetting the Onboard Administrator to Factory Defaults

Advisory: (Revision) Blue Screen and Stop 0x000000D1 on ProLiant Server Configured with Smart Array E200/P400/P600 Controller Under High Utilization Running STORPORT.SYS and HPCISSS2.SYS Version 5.8.0.xx and Any Edition of Microsoft Windows Server 2003

Advisory: (Revision) Broadcom NetXtreme Gigabit Ethernet Driver (BRCMbcme) Version 11.7.2 (Or Earlier) May Not Attach To a ProLiant BL c-Class Server Blade Configured With Certain Network Interface Controllers (NICs) and Running Sun Solaris 10

Advisory: (Revision) Brocade or HP B-Series Fibre Channel Switch Running Fabric OS v5.2.x May Reject NPIV Login Requests When More Than Seven ProLiant c-Class Server Blade HBAs are Attempting to Login Simultaneously Through a VC-FC Module

Advisory: (Revision) Certain Modules May Take Longer Than Expected to Load/Unload When Running HP Lights-Out Drivers and Agents for Linux on ProLiant Server Running Red Hat Enterprise Linux 4 (AMD64/EM64T) or SUSE LINUX Enterprise Server 9 (AMD64/EM64T)

Advisory: (Revision) Certain Operating Systems May Not Report All Installed Memory for HP ProLiant Servers with 4 GB or Greater of Memory if PAE Mode Is Not Enabled

Advisory: (Revision) Certain ProLiant Servers with Certain Configurations of PCI/PCI-Express Option Cards with Four (or more) Options ROMs May Be Unable to PXE Boot from the Embedded Network Adapter

Advisory: (Revision) Changing the System I/O board on Certain ProLiant Servers May Generate Microsoft Windows "Found New Hardware" Pop-Up Window

Advisory: (Revision) Cisco Catalyst Blade Switch 3020/3120 for HP c-Class BladeSystem - Switch Ports Connected to the HP BL-c Adapter(s) May Not Be Available After Rebooting Server Blade

Advisory: (Revision) Configuration Scripts Generated by HP BladeSystem c-Class Enclosure Onboard Administrator Version 1.0 Do Not Contain Power Settings for the Enclosure

Advisory: (Revision) Creating an Organizational Unit (OU) to Address Inheritable Permissions for Lights-Out Remote Management Devices When Using HP Schema Directory Integration

Advisory: (Revision) CUSTOMER ACTION REQUIRED to Identify and Replace Certain HP BladeSystem c7000 Enclosure Power Supplies that May Experience an Extremely Rare Issue Resulting in Power Supply Failure

Advisory: (Revision) CUSTOMER ACTION REQUIRED to Prevent Kernel Panics or Extremely Rare But Potential Data Miscompares From Occurring on ProLiant Servers Running Certain Versions of HP NC370x/371x/373x/374x/380x Gigabit Ethernet NIC Driver for Solaris 10

Advisory: (Revision) CUSTOMER ATTENTION REQUIRED to Prevent ProLiant Server Boot Delay or Boot Failure in Rare Scenario of Network Failure Occurring During iLO 2 Across-the-Network Firmware Upgrade from a Version Prior to Version 1.29

Advisory: (Revision) Device Bays List in HP BladeSystem c-Class Onboard Administrator (OA) Version 1.30 May Contain a Blank Entry for a Server Blade Name

Advisory: (Revision) DRIVER UPGRADE REQUIRED to Ensure Proper Handling of Network Data on Certain HP NC-Series NICs Using TOE, RDMA or Accelerated iSCSI Functionality in a Microsoft Windows Server 2003 Environment During Periods of Heavy Network Traffic

Advisory: (Revision) Embedded Network Adapters May Not Display in ROM-Based Setup Utility "Standard Boot Order (IPL)" Menu Option on Certain ProLiant Servers with Certain Configurations of Initial Program Loader (IPL) Device PCI/PCI-express Option Card(s)

Advisory: (Revision) Erroneous "Good" Network Port Connectivity Link Status May Be Observed or Reported for NC-Series NICs in HP BladeSystem c-Class Server Blades if Network Port Links are Down or Internetworking Devices are Physically Removed

Advisory: (Revision) Error Message May Appear After Adding User "admin" Using Onboard Administrator Version 1.12 (or Earlier) and Running Configuration Script on HP BladeSystem c-Class Enclosure

Advisory: (Revision) ESX Service Console May Stop Responding After Installing HP Insight Management Agents On VMware ESX Server 2.5

Advisory: (Revision) Extended Timeouts and Delays May Occur in the Boot Process on Some HP BladeSystem c-Class Server Blades Configured with an HP 4 GB Virtual Connect Fibre Channel Module if the Module WWN is in the Same Zone as the Host Bus Adapter

Advisory: (Revision) Fibre Channel HBAs Not Listed in HP Array Configuration/Diagnostics Utilities on HP ProLiant Servers Running Certain 64-Bit Versions of Linux and the HP Insight Management Agents for Linux Version 8.00 (or Later)

Advisory: (Revision) Fibre Channel Login Sequence May Be Delayed for HP BladeSystem c-Class Server Blade if Multiple HBAs Are Aggregated Through a Single HP 4 Gb Virtual Connect Fibre Channel Module Uplink Port Attached to a Cisco MDS Fibre Channel Switch

Advisory: (Revision) FIRMWARE UPGRADE REQUIRED to Ensure Erroneous Memory Errors Do Not Occur on Servers Configured with Certain 1GB PC2-5300 Dual Rank Memory Modules or 2 GB FBD PC2-5300 Dual Rank Memory Modules

Advisory: (Revision) FIRMWARE UPGRADE REQUIRED to Ensure Proper Handling of Network Data During Periods of Heavy Network Traffic on Certain HP NC-Series NICs Functioning in Layer 2 (L2) Mode

Advisory: (Revision) FIRMWARE UPGRADE REQUIRED to Prevent Certain HP SAS Hard Drives from Becoming Inaccessible During Normal Operation

Advisory: (Revision) FIRMWARE UPGRADE REQUIRED: Some HP 4Gb Virtual Connect Fibre Channel (HP 4Gb VC-FC) Modules May Enter Into an Unrecoverable State and Will Not Initialize

Advisory: (Revision) HARD DRIVE FIRMWARE UPGRADE REQUIRED to Correct Excessive Timeouts and Reduced Performance That May Occur on Certain HP Ultra320 SCSI Hard Drives

Advisory: (Revision) High CPU Utilization Running Versions of HP Server Management Agents Through Version 7.61 for Red Hat Enterprise Linux 2.1 and 3, UnitedLinux 1.0/SUSE LINUX Enterprise Server 8, and VMware ESX Server Versions 2.5.x and 3.0.x

Advisory: (Revision) Hour/ Time Stamp May Be Incorrectly Displayed with 7-Digit Numbers After Running Tests on ProLiant Servers Using the Version of HP Insight Diagnostics Shipped with the SmartStart 7.6.0 CD-ROM

Advisory: (Revision) HP BladeSystem - Server Blades May Fail to Power Back On After Being Powered Off if the Enclosure Is Running Onboard Administrator Firmware 2.42 Through 2.51

Advisory: (Revision) HP BladeSystem c-Class Enclosure May Take Up to Five Minutes to Complete Initialization when it is Powered On for the First Time

Advisory: (Revision) HP BladeSystem c-Class Enclosure Onboard Administrator Graphical User Interface (GUI) May Not Update with Topology Changes when Logged into Multiple Enclosures

Advisory: (Revision) HP BladeSystem c-CLass Enclosure Onboard Administrator GUI May Not Display Enclosures After the Onboard Administrator is Reset or Powered On

Advisory: (Revision) HP BladeSystem c-Class Onboard Administrator May Report a False Fan Degraded Status Message and then Immediately Report That the Fan is Operational Again

Advisory: (Revision) HP BladeSystem c-Class Onboard Administrator May Report a False Power Supply Failed or Unknown Status Message and Then Immediately Report That the Power Supply Is Operational Again

Advisory: (Revision) HP BladeSystem c-Class Server Blades - Servers May Not Power On After a Virtual Connect Module is Removed From a c-Class Enclosure

Advisory: (Revision) HP BladeSystem- HP Bladesystem c7000 Onboard Administrator May Report Incorrect Device Status After Removal and Reinsertion of the OA Module into the OA Tray

Advisory: (Revision) HP BladeSystem Mezzanine HBAs - Server May Blue Screen if Drivers for the Emulex and QLogic HBAs on the SmartStart or ProLiant Support Pack 8.10 or 8.15 CD Are Used With HP BL Emulex and QLogic Mezzanine Host Bus Adapters

Advisory: (Revision) HP c-Class BladeSystem Server Blades - QLogic QMH2462 4Gb FC HBA Firmware Component Version 2008.07.25 Should Not Be Applied to a QMH2462 HBA in a Virtual Connect Environment

Advisory: (Revision) HP Insight Control Data Center Edition 1.0 Will Not Install on HP ProLiant Servers with More Than 4 GB of RAM

Advisory: (Revision) HP Insight Diagnostics - A False "Controller Has Reported a Critical Performance Threshold on This Drive" Error Message May Be Reported

Advisory: (Revision) HP Insight Diagnostics Online Edition for Windows 2000/Windows Server 2003 Version 7.5.5.1681 (Or Earlier) Incorrectly Reports Power Supply Status

Advisory: (Revision) HP Insight Diagnostics Online Edition for Windows 2000/Windows Server 2003 Version 7.5.5.1681 (Or Earlier) Incorrectly Reports Smart Array Controller Memory Size on ProLiant Servers

Advisory: (Revision) HP Insight Diagnostics Version 7.5.5 or 7.6.0 Will Not Install on ProLiant Servers Running a Non-Graphical Version of the Linux Operating System

Advisory: (Revision) HP Insight Diagnostics Version 7.6.0 Command Line Option -U Does Not Remove Scheduled Tasks Created Through the Graphical User Interface (GUI)

Advisory: (Revision) HP Insight Management Agents for VMware Version 7.9.0 May Generate a Defunct Process Every Five Minutes if the Agents are Running on VMware ESX Server 3.0.x

Advisory: (Revision) HP Insight Management Agents Version 8.00 May Not Send Hardware Failure Trap Alerts to the Defined Destination IP Address

Advisory: (Revision) HP Insight Management WBEM Providers For Windows Server 2003/2008 Version 2.1.0.0 May Not Generate Server Health Indications After Administrative Privileges Have Been Removed And a ProLiant Server Has Been Rebooted

Advisory: (Revision) HP Insight Power Manager 1.40 is Unable to Collect Integrated Lights-Out 2 (iLO 2) License Information

Advisory: (Revision) HP Integrated Lights-Out (iLO/iLO 2) - HP Integrated Lights-Out (iLO/iLO 2) Versions 1.93/1.70 (or Earlier) Online ROM Flash Components for Linux Are Not Compatible with HP iLO Channel Interface Driver Version 8.2.0 (or Later)

Advisory: (Revision) HP Integrated Lights-Out 2 (iLO 2) - Disabling HP iLO Management Channel Interface Driver in Windows Device Manager will Disable iLO 2 Remote Console Keyboard / Mouse and Cause Long Delay During Boot

Advisory: (Revision) HP Integrated Lights-Out 2 (iLO 2) Does Not Receive Valid IP Address from Onboard Administrator if HP BladeSystem c7000 Enclosure Version 1.00 or 1.01 Uses Enclosure Bay IP Addressing (EBIPA) with No External Network Connected

Advisory: (Revision) HP Integrated Lights-Out 2 (iLO 2) Integrated Remote Console (IRC) Will Not Connect Through a Firewall Using Network Address Translation (NAT)

Advisory: (Revision) HP Lights-Out Migration Utility (HPQLOMIG) Does Not Allow the Active Directory Authentication Port to be Changed when Setting Up Schema-Free Integration

Advisory: (Revision) HP Lights-Out Online Configuration Utility for Linux (hponcfg) Is Not Available After Upgrading to ProLiant Support Pack 8.11 on ProLiant Server Running Linux

Advisory: (Revision) HP NC325m and HP NC373m PCI Express Gigabit Server Adapters in HP BladeSystem ProLiant c-Class Blade Server Running Red Hat Enterprise Linux 3 (x86) May Be Unable to Communicate Over the Network After Installation

Advisory: (Revision) HP NC510x Gigabit Server Adapters and HP NC512m Mezzanine Adapters Are Not Operational on HP ProLiant Servers Configured with More Than 32 GB Memory for Windows or More Than 128 GB Memory for Linux

Advisory: (Revision) HP NC532m/NC532i Network Adapters - NC-Series Broadcom 10 Gb Multifunction Driver for Linux (bnx2x) Version 1.45.19 Does Not Support More Than Eleven Virtual Network Adapters

Advisory: (Revision) HP Performance Management Pack - PMP Version 5.0 (or Earlier) is Not Supported on ProLiant Servers Running Linux with a Kernel Version 2.6 (or Later)

Advisory: (Revision) HP ProLiant BL460c Server Blade May Not Detect the Integrated Smart Array E200i RAID Controller During Power-On Self-Test (POST), Preventing Operating System Installation

Advisory: (Revision) HP ProLiant Essentials Rapid Deployment Pack - Windows Edition 3.10 Read Hardware Configuration Job May Indicate Two Consecutive Tasks Failed When Only the First of the Two Tasks Actually Failed

Advisory: (Revision) HP ProLiant Servers - Fibre Channel Storage Event Driver CPQFCAC.SYS for Windows Server 2008 Is Not Included on the HP SmartStart 8.00 CDs

Advisory: (Revision) HP ProLiant Servers with Integrated Lights-Out 2 ( iLO 2) - HP Insight Server Agents Will Not Generate iLO 2 Reset Traps

Advisory: (Revision) HP ProLiant Smart Array SAS/SATA Event Notification Service Version 6.4.0.xx Does Not Log All Events to the Windows Registry

Advisory: (Revision) HP QLogic QMH2462 4 GB Host Bus Adapter (HBA) May Be Unable to Discover Storage Devices in an HP BladeSystem c-Class Enclosure if the HBA Connection Type Is Not Set to Point-to-Point

Advisory: (Revision) HP Smart Array - HP Smart Array Controller Driver for Solaris 10 (CPQary3) Version 2.1.0 Will Not Log Storage Events By Default

Advisory: (Revision) HP Smart Array E200/E200i Controller Attached to SAS Hard Drives - Bus Fault Count May Incorrectly Increment When Running HP Array Diagnostics Utility or HP Insight Diagnostics and E200 Firmware Earlier Than Firmware Version 1.78

Advisory: (Revision) HP System Management Homepage (SMH) May Display Some NIC and System Board Values as "???" on ProLiant Servers Running Microsoft Windows Server 2003 (Japanese Editions) and HP Insight Management WBEM Providers for Windows

Advisory: (Revision) HP System Management Homepage (SMH) May Incorrectly Display the Environmental and/or Power Subsystem Status as "OK" with Integrated Lights-Out (iLO 2) Firmware Versions 1.11 and 1.20 When the Condition is "Degraded" or "Failed"

Advisory: (Revision) HP Systems Insight Manager (HP SIM) 5.1 SP1 (or Earlier) Common Attributes Selection May Exhibit Slow Performance on ProLiant Servers

Advisory: (Revision) HP Systems Insight Manager (HP SIM) 5.2 Logical Disk Drives Report May Contain Blank Fields

Advisory: (Revision) HP Systems Insight Manager (HP SIM) Discovery Process May Not Discover all Devices or Existing Devices May No Longer Appear

Advisory: (Revision) HP Systems Insight Manager (HP SIM) May Not Resolve the Origin of Received Traps to the Correct Managed Server

Advisory: (Revision) HP Systems Insight Manager (HP SIM) Version 5.3 Windows Software - HP SIM Configured With the Remote Support Pack (RSP) Plug-In May Suddenly Shutdown

Advisory: (Revision) HP Version Control Agent (VCA) for Windows Displays "Internal Server Error" When Clearing and Saving VCA Log

Advisory: (Revision) HPASMCLI Version 7.5x Does Not Provide Fan or Power Supply Information on ProLiant Servers Running Linux

Advisory: (Revision) iLO 2 User Account May Be Automatically Created by Onboard Administrator in an HP BladeSystem c-Class Enclosure

Advisory: (Revision) Initiating Kernel Core Dump (Sysrq +D Key Sequence) in SUSE LINUX Enterprise Server 9 Using Integrated Lights-Out 2 Virtual Keyboard or Standard USB Keyboard May Cause ProLiant Server with Smart Array Controller to Become Unresponsive

Advisory: (Revision) Insight Management Server Agents for Microsoft Windows Server 2003 do not Generate a Trap When the Threshold for Correctable Processor Errors have been Exceeded on ProLiant Servers

Advisory: (Revision) Installation of HP Server Migration Pack-Universal 3.0 Linux Agent on a VMware ESX Server 3.x Host May Cause X2V and V2X Operations to Fail

Advisory: (Revision) Integrated Lights-Out (iLO) / Integrated Lights-Out 2 (iLO 2) May Stop Responding While Running Scripts to Continuously Collect Data Through an SSH Connection

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Management Processor is Unable to Track Date and Time Information When the Enclosure Based IP Addressing (EBIPA) Setting is Changed on a ProLiant c-Class Server Blade

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) CLP Commands Used to Display and Modify Local User Account Information May Cause Unintended Effects on Other User Accounts

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Command Line Protocol (CLP) Incorrectly Attempts to Display Power Supply Information for ProLiant Server Blades

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Console Replay Capture Buffer Export Feature May Cause the Server to Stop Responding

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Does Not Support Some Keystroke Combinations Required to Perform Remote Debugging or Special Operations Using the iLO 2 Remote Console

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Integrated Remote Console (IRC) or Remote Console Session May Not Display Fully on the Monitor Screen

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Login Process May Pause for 15 to 20 Seconds

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) May Not Establish an SSH Connection With an OpenVMS 8.2 SSH Client

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) May Not Request Power Allocation During Cold Reboot Request Causing Power Loss to Occur on Rare Occasions on One or more ProLiant BL460c, BL480c, BL685c Server Blades in HP BladeSystem c-Class Enclosure

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Remote Console Cannot Be Opened from a Browser Session that was Spawned from Another Browser Session

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Virtual Media is Unable to Boot from Certain USB CD/DVD-ROM Drives When Connected Through the Integrated Remote Console (IRC)

Advisory: (Revision) Integrated Lights-Out 2 (iLO 2) Web Page Appears to Time Out with Infinite Time Out Enabled

Advisory: (Revision) Integrated Remote Console (IRC) Toolbar Icons for Features Included in Integrated Lights-Out 2 (iLO 2) Firmware Version 1.30 are not Removed When Browsing to an iLO 2 with an Earlier Firmware Version

Advisory: (Revision) Kernel Panic May Occur when Unloading the HP Lights-Out Drivers and Agents for Red Hat Enterprise Linux 4 (x86) on ProLiant Servers Running Red Hat Enterprise Linux 4 Update 3 with Hugemem Kernel

Advisory: (Revision) Key Sequence CTRL+P ! May Cause HP Integrated Lights-Out 2 (iLO 2) to Become Unresponsive During a Virtual Serial Port Session

Advisory: (Revision) Linux - ProLiant server running Red Hat Enterprise Linux 4 or Red Hat Linux Enterprise 5 Configured with the HP SNMP Performance Monitor Agent (cmaperfd) May Display High CPU Utilization

Advisory: (Revision) Linux Storage Drivers (cpq_cciss, mptlinux and aic7xxx) for Red Hat Enterprise Linux 3 Update 7 Single Processor Kernels Will Erroneously Display Version Mismatch Messages and Tainted Kernel Message

Advisory: (Revision) Local Mouse and Remote Mouse Do Not Stay Synchronized When Using Integrated Lights-Out 2 (iLO 2) Remote Console and the HP SmartStart Release 7.40 (or Later) CD on an HP ProLiant Server

Advisory: (Revision) Maximum Processor Speed Always Reported on Certain HP ProLiant Servers Running Microsoft Windows Server 2003 or Linux when HP Power Regulator is Configured for HP Static Low Power Mode

Advisory: (Revision) Microsoft Hyper-V - Guest Operating System Installation From an HP-Branded Windows Server 2008 Media DVD in Full-Installation Or Server-Core Mode May Not Be Successful On a ProLiant Server

Advisory: (Revision) Microsoft Windows 2000 Server Installation Does Not Complete Successfully on Certain HP ProLiant Servers Using a USB CD-ROM Drive

Advisory: (Revision) Microsoft Windows Server 2003 Installation Does Not Complete Successfully on Certain HP ProLiant Servers Using a USB Floppy Drive

Advisory: (Revision) NC510C, NC510F, and NC512m Network Adapters: Update to Driver Version 3.4.337 to Avoid a Timeout Condition That May Occur When Using Driver Version 3.4.336

Advisory: (Revision) Port Status on a Fibre Channel HBA May Not be Properly Updated in HP System Management Homepage When a Link Failure Occurs

Advisory: (Revision) ProLiant and Integrity Servers: SATA Hard Drives - FIRMWARE UPGRADE REQUIRED to Ensure That Certain SATA Hard Drives Are Not Susceptible to a Potential and Rare Condition in which Stale Data is Returned from the Drive Cache

Advisory: (Revision) ProLiant and Integrity Servers: Smart Array Controllers - Correcting the "1716" POST Error Message Observed After a Drive Array Rebuild Operation

Advisory: (Revision) ProLiant c-Class Server Blades - ONLINE ROM FLASH COMPONENT UPGRADE REQUIRED to Prevent Servers from Failing to Boot, Losing Power Measurement Capability Using iLO 2 Power Graphs or Insight Power Manager, or Losing PXE Functionality

Advisory: (Revision) ProLiant Essentials HP Insight Power Manager (IPM) Reports Page May Incorrectly Indicate "Task Failed" for a Power Manager State Change on a Group of ProLiant Servers

Advisory: (Revision) ProLiant Essentials Server Migration Pack (P2P or P2V) or Server Migration Pack-Universal 3.0 and 3.5 Running Windows 2000 Server With Network Teaming Will Not Maintain a Network Team After the Migration to the Destination Server

Advisory: (Revision) ProLiant Server May Blue Screen Running Microsoft Windows Server 2003 with ProLiant Smart Array SAS/SATA Controller Driver (HPCISSS2.SYS) Version 6.6.0 (or earlier) and HP Storage Agent After Applying ProLiant Support Pack (PSP) 7.80

Advisory: (Revision) ProLiant Servers - Servers with Equal to or Greater Than 64 GB of Memory May Stop Responding While Booting SmartStart 8.25 (or Earlier), Firmware Maintenance CD 8.50 (or Earlier), or HP BladeSystem Firmware Deployment Tool CD 1.60

Advisory: (Revision) ProLiant Servers Configured with Certain HP Smart Array, SCSI or SAS/SATA Controllers Running Microsoft Windows Server 2003 Base Media May Intermittently Stop Responding with a "STOP 0xD1 IRQL_NOT_LESS_OR_EQUAL" Blue Screen Message

Advisory: (Revision) ProLiant Servers May Become Unresponsive or Generate a STOP 0x000000D1 Blue Screen When Running HP NIC Teaming and Microsoft Windows Server 2003 SP1 with the Scalable Networking Pack (SNP) and TCP/IP Offload Engine (TOE)

Advisory: (Revision) ProLiant Servers Running VMware ESXi 3.5.0 - VMware Infrastructure Client Software Does Not Display Degraded or Failed System Memory Status

Advisory: (Revision) ProLiant Servers with Integrated Lights-Out (iLO) or Integrated Lights-Out 2 (iLO 2) May Not Send an SNMP Trap Alert When a Server Reset Event Occurs

Advisory: (Revision) ProLiant Servers With Intel Xeon Dual-Core System Processors May Become Unresponsive While Installing Microsoft Windows Server 2003 Server Standard/Enterprise (Without SP 1)

Advisory: (Revision) ProLiant Servers: iLO 2 - Script Error Displayed When Navigating to Network Settings in the iLO 2 Web Interface on Servers That Do Not Support the iLO 2 Shared Network Port Option

Advisory: (Revision) ProLiant Servers: NC-Series Network Adapters - NC-Series Firmware Components for Windows Cannot Be Deployed Using Smart Update Manager on Firmware Maintenance CD Version 8.00 or 8.10

Advisory: (Revision) Query of Management Information Base (MIB) Using snmpwalk Does Not Display Negative Values as Expected When Running Red Hat Enterprise Linux 4 (AMD64/EM64T) Update 4 and -7 Revision of net-snmp Package

Advisory: (Revision) Query of Management Information Base (MIB) Using snmpwalk Results in Incorrect Data Returned When Running 64-Bit Linux and HPASM Version 7.70 on ProLiant Servers

Advisory: (Revision) Rapid Deployment Pack-Windows Edition Scripted Installation or Read/Write Image Job May Inadvertently Deploy to or Capture From a USB Drive Key or SAN Drive Instead of the Hard Drive

Advisory: (Revision) Red Hat Enterprise Linux 4 or 5 - hpasmxld or hpasmlited Segfault Messages Are Displayed in /var/log/messages Log File When High Number of Broadcast Messages Are Sent (Broadcast Storm) on the HP Integrated Lights-Out 2 Network

Advisory: (Revision) Red Hat Enterprise Linux 4 Update 5 on ProLiant Server and Red Hat Enterprise Linux 5 on Integrity with Smart Array Controller Driver (CCISS) and Logical Drive 2 TB or Greater May Cause Logical Drive To Be Inaccessible or Not To Boot

Advisory: (Revision) Removing and Reinserting the HP BladeSystem c-Class Onboard Administrator Module on an HP BladeSystem c-Class c3000 Enclosure During Power-On Self-Test (POST) May Lead to Erroneous "High Temperature Condition" Message

Advisory: (Revision) ROM-Based Memory Test (MEMBIST) in HP Insight Diagnostics Offline Edition May Not Fail As Expected When Non-Functioning or Sub-Optimal Fully Buffered DIMMS Are Installed in the System

Advisory: (Revision) SAS/SATA Fan, Power Supply, and Temperature Events Numbered Differently When Logged to Windows System Event Log and HP ProLiant Integrated Management Log by HP Smart Array SAS/SATA Event Notification Service (CISSESRV) Version 5.8.0.x

Advisory: (Revision) SCSIPort Driver Included in ProLiant Support Pack for Microsoft Windows 2000/Server 2003 Version 7.20 (or later) Will Overwrite Storport Driver if Storport Driver is Already Installed

Advisory: (Revision) Server Blades May Be Displayed as "Unknown" with Generic Half-Height Graphics in HP BladeSystem c-Class Enclosure Onboard Administrator

Advisory: (Revision) Server Boot Process May Be Delayed for HP BladeSystem c-Class Server Blade if Multiple Host Bus Adapters Are Aggregated Through a Single HP 4Gb Virtual Connect Fibre Channel Module Uplink Port Attached to a Brocade Fabric Switch

Advisory: (Revision) Server Migration Pack (SMP) Universal Edition 3.0 and 3.50 May Produce the Error "At Least One Service or Driver Failed During the System Startup" on ProLiant Servers

Advisory: (Revision) Slow or Failed Access to Integrated Lights-Out 2 (iLO 2) on ProLiant BL c-Class Server Blades When iLO 2 NIC Is Set to Full Duplex Mode

Advisory: (Revision) Smart Array SAS/SATA Controller Driver Version 6.6.0 (or Earlier) on ProLiant Servers Running Microsoft Windows Server 2003 SP2 and/or the Storport QFE KB932755 May Cause the System to Become Unresponsive or Blue Screen At Shutdown

Advisory: (Revision) SmartStart Release 8.00 Cannot Be Used to Deploy an Operating System if the Logical Drive Size Created is Equal to or Larger Than One Terabyte (1 TB)

Advisory: (Revision) SOFTPAQ UPDATE RECOMMENDED to Obtain Microsoft Patch Acquisitions Using the HP Vulnerability and Patch Management Pack (VPM) 2.0.3, 2.0.4, 2.1.1, 2.1.2 and 2.2.0

Advisory: (Revision) Some of the Categories On the Error Code Page May Not Be Properly Translated to Localized Languages When using HP Insight Diagnostics 8.0.0 on a ProLiant Server

Advisory: (Revision) Some Vulnerability and Patch Management (VPM) Version 2.0.3 (and Earlier) Patch Installations Must Be Executed in Attended Mode Instead of Unattended Mode or Silent Mode on Target Servers

Advisory: (Revision) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Unexpectedly Reboots When Running HP Array Diagnostics Utility (ADU) GUI or CLI on ProLiant Servers Configured with Certain Fibre Channel HBA with Drives Attached

Advisory: (Revision) System and Power Supply Health Status Does Not Display in System Management Homepage After an HP Management Agents Upgrade from Version 7.60b (or Earlier) to Version 7.70 on ProLiant Servers Running VMware ESX Server 3.0.0 or 3.0.1

Advisory: (Revision) System Management Homepage (SMH) Exhibits Slow Response on ProLiant Servers Running Red Hat Enterprise Linux 4 Update 5

Advisory: (Revision) System Management Homepage (SMH) Version 3.0.2 - SMH Version 3.0.2 Configured With ProLiant Support Pack (PSP) Version 8.30 May Not Display Data In the Integrated Management Log (IML) Entries Section When Using IE 8.0

Advisory: (Revision) SYSTEM ROM UPGRADE RECOMMENDED to Prevent Rare Machine Check Exception or Server Unresponsiveness on ProLiant Servers Utilizing Dual-Core Intel Xeon 5200-series and Quad-Core Intel Xeon 5400-series Processors

Advisory: (Revision) Upgrade ProLiant ML/DL/BL Firmware Job May Indicate Success When the Hard Drive Firmware Did Not Upgrade Using Rapid Deployment Pack - Windows Edition 3.10

Advisory: (Revision) Using a Single Sign-On from HP BladeSystem c-Class Enclosure Onboard Administrator to an Integrated Lights-Out (iLO) Remote Console Fullscreen Session May Cause the Screen Resolution to Change and the Screen to Become Unresponsive

Advisory: (Revision) Video May Become Irregular or Disappear on Some ProLiant Servers Using LCD Monitors When Installing Microsoft Windows Server 2003 with Emergency Management Services (EMS) Enabled

Advisory: (Revision) Virtual Connect (VC) - The VC Configuration Is Not Properly Cleared When Server Blades with VC Profiled MAC and/or WWN Addresses Are Removed From the Enclosure and the VC Domain Is Deleted

Advisory: (Revision) Virtual Connect Enterprise Manager (VCEM) 1.0 May Not Be Able To Add VC domains to a Domain Group If The Domain Is Configured With VLAN ID 1 Or VLAN ID 4094 On a ProLiant c-Class Server Blade

Advisory: (Revision) Virtual Connect Enterprise Manager (VCEM) 1.0 May Not Be Able To Add Virtual Connect (VC) Domains to a Virtual Connect Domain Group After Updating the VC Domain Group on a ProLiant Server

Advisory: (Revision) Virtual Connect Enterprise Manager (VCEM) Version 1.30 - Server Blades May Not Receive an IP Address When Configured With Multiple Networks and One Untagged Network

Advisory: (Revision) Virtual Connect Manager (VCM) "Help /About HP Virtual Connect Manager" Web Page May Be Unresponsive and Display "Loading..." On HP BladeSystem Enclosures Configured With Virtual Connect (VC) Firmware Version 1.20 or 1.21

Advisory: (Revision) Virtual Connect Manager (VCM) May Display The False Error Message, "VC Domain Locked by Virtual Connect Enterprise Manager" On a ProLiant c-Class Server Blade

Advisory: (Revision) Virtual Media ISO Image Cannot Be Mounted Using ProLiant Server Integrated Lights-Out 2 (iLO 2) - Integrated Remote Console (IRC) from a Client Running Microsoft Vista Enterprise Edition

Advisory: (Revision) Virtual Media May Not Allow Multiple Connections to the Same ISO Image Using Integrated Lights-Out (iLO or iLO 2) Integrated Remote Console (IRC)

Advisory: (Revision) VMware ESX 3.5 Update 2, 3, or 4 and VMware ESX 4.0 - Microsoft Windows Server 2008 from HP Will Not Install on VMware as a Virtual Machine

Advisory: (Revision) VMware ESX and vCenter 4.0 - After Restarting the VMM Service, the vCenter 4.0 Events Are Not Logged In HP Systems Insight Manager (HP SIM) and the Distributed Power Management (DPM) Suspend/Resume Events Are Not Monitored

Advisory: (Revision)Target Server May Not Connect to the FTP Server During a VMware ESX Server 3.x Scripted Installation Using the HP ProLiant Essentials Rapid Deployment Pack - Windows Edition 3.10 to 3.70

Advisory: (Revision)Temporary Virtual Connect Network Outage May Occur In a BladeSystem c-Class Enclosure if Virtual Connect Manager (VCM) Restarts

Advisory: `Unsupported Module, Tainting Kernel` Message Occurs when Installing SUSE LINUX ES 9 SP1 on a ProLiant Server

Advisory: A Kernel Panic May Occur Under Red Hat Enterprise Linux 3 After Installing an Updated ProLiant Smart Array Controller for Linux (cciss) Driver

Advisory: A Timeout May Occur While Executing HP BladeSystem c-Class Onboard Administrator Firmware Component for Linux Version 2.10 (or Earlier) on any ProLiant Server Blade Running a Linux AMD64/EM64T Operating System

Advisory: ABEND in CPQSCSA.NLM May Occur When Setting ALLOC MEMORY CHECK FLAG = ON to Troubleshoot a NetWare 6.5 Issue on an HP ProLiant Server

Advisory: Accessing VMware ESX Server 3i 3.5.0 on ProLiant Servers Using VMware Infrastructure Client Version 2.5.0 Does Not Display the Correct System BIOS Version Dates if the VMware Builds are Less Than 103909

Advisory: After Applying iLO Advanced Pack or iLO Select Pack License, HP Insight Power Manager (IPM) May Display a Message Indicating Integrated Lights-Out 2 (iLO 2) is not Licensed

Advisory: After Installing Microsoft Windows Server 2003 x64 (Any Edition) and Insight Management Agents 7.50 or 7.60 on ProLiant Servers, Event ID 1102 Warning Messages Appear in the System Event Log if the Cluster Information Sub-Agent is Enabled

Advisory: An HP StorageWorks SB40c Storage Blade Attached to an HP BladeSystem c-Class Server Blade May Become Inaccessible After Rebooting the Server Blade Following a Reset or Failover of Onboard Administrator

Advisory: Assigning an HP Virtual Connect Server Profile to an Empty Bay in an HP BladeSystem c7000 Enclosure May Result in Erroneous "Failed" Message

Advisory: Assisted Installation of Windows Server 2003 R2 Editions May Disable the Microsoft Internet Explorer Enhanced Security Feature on ProLiant Servers

Advisory: AVC Denial Warning Message is Displayed on ProLiant Servers Running Red Hat Enterprise Linux 5 with Security-Enhanced Linux (SELinux)

Advisory: BIOS Serial Console Feature Will Not Display Text Above the 25th Line on Certain ProLiant Servers when the Remote Terminal Display is Set to More Than 25 Rows

Advisory: BladeSystem c3000 Enclosure - The c3000 Enclosure KVM May Not Allow The Caps Lock Key To Toggle Between Upper And Lowercase Letters Using BladeSystem c-Class Onboard Administrator Firmware Version 2.52 (or earlier)

Advisory: BladeSystem c-Class Devices Partnered with a Server Blade May Not Be Detected by the Server Operating System After Resetting Onboard Administrator and Then Warm-Booting the Server

Advisory: BladeSystem Onboard Administrator Graphical User Interface (GUI) Port Mapping Icons for the HP BladeSystem c3000 Enclosure Interconnect Bays Do Not Match the Colors and Shapes of Port Mapping on the Back of the Enclosure

Advisory: Blue Screen May Occur After Replacing HP NC325m Adapter with NC326m Adapter in an HP BladeSystem ProLiant c-Class Blade Server Running Any Edition of Microsoft Windows Server 2003 SP1 or Microsoft Windows Server 2003 (x64) SP1

Advisory: Bolt on HP Power Distribution Unit Installed in HP 10000 Series Rack May Not Allow Rack Door to Close

Advisory: Booting a ProLiant Server Using Integrated Lights-Out 2 (iLO 2) Virtual Media May Fail to Complete

ADVISORY: Brocade 4Gb SAN Switch for HP c-Class BladeSystem can fail POST (Power On Self Test) upon cold power up with fully loaded c-Class BladeSystem enclosure

Advisory: Certain Editions of HP Array Configuration Utility and Array Diagnostics Utility in SmartStart 8.00 Display Potentially Erroneous "Background Parity Initialization" Status for Even-Numbered RAID 5 and RAID 6 Logical Drives

Advisory: Certain Network Team Configurations of the HP NC532x Dual Port 10GbE Multifunction BL-c Adapter Will Enter a Failed State if Rx Path Validation is Enabled

Advisory: Certain ProLiant Server and Health Information Unavailable in HP Systems Insight Manager After Rebuilding and Deploying HP System Health Application and Insight Management Agents for Linux (AMD64/EM64T) Version 7.51 (or later)

Advisory: Certain ProLiant Servers May Report the MAC Address Incorrectly for the Embedded Network Interface Controller (NIC)

Advisory: Certain ProLiant Servers with a System ROM Version Dated Earlier than 2006.09.18 Will Not Boot When Configured with more than Five PXE-Capable Network Adapters

Advisory: Change to JRE (Java Runtime Environment) Path from Oracle 9.2.0.8 Security Patch May Cause "PATH" Environment Variable to be Modified for Certain HP Systems Insight Manager (HP SIM) Command Line Interface (CLI) Instructions

Advisory: Changes May Not Be Accepted to the Default Installation Options When Using "Initial ProLiant Support Pack Install" with HP Systems Insight Manager (HP SIM) 5.1

Advisory: Cisco Catalyst Blade Switch 3020 - "IP ROUTE" Statement Will Be Displayed Twice After Issuing the "Show Run" Command if the Switch Is Set to Use DHCP to Assign the IP Address to an Interface

Advisory: Clicking the "Remote Console" Button Within HP Systems Insight Manager 5.0 (HP SIM) SP5 to Start the Remote Console Session for a Virtual Machine on a VMware Host Does Not Function if HP SIM 5.0 was Upgraded From SP4

Advisory: Clients Lose Connection with Cluster Resource After Migrating Resource to Another Cluster Node Running Novell Cluster Services and HP Gigabit Ethernet NIC Teaming Driver (QASP.LAN)

Advisory: Cmaeventd Storage Agent May Not Be Capable of Changing the Polling Frequency From the Default Time Cycle When Running Red Hat Enterprise Linux 4 and 5 On a ProLiant Server With Installed ProLiant Support Pack 7.90 or 8.00

Advisory: Command Line Interface (CLI) Instructions May Not Return the Expected Information in HP Systems Insight Manager (HP SIM) 5.0 through 5.1 After Installing Oracle Server Patch 9.2.0.8

Advisory: Continuous Beeps and CDM Driver Error Messages May Occur After Rebooting HP ProLiant Server Running NetWare 6.5 SP5 (or Later) With Failed Logical Drive(s) Configured on HP Smart Array SAS/SATA Controller

Advisory: Creating Additional Customize Collections in HP Systems Insight Manager (HP SIM) 5.0 or 5.1 Based On a Software Component Version Results In Previous Customize Collections using "Version Is" Field from Most Recently Edited Customize Collection

Advisory: Data Collection Status on HP Insight Power Manager (IPM) Reports Page May Display "iLO Error Response: 1 (Syntax Error)"

Advisory: Data Collection Status on HP Insight Power Manager (IPM) Reports Page May Display "SSL Peer Shut Down Incorrectly"

Advisory: Data Execution Prevention (DEP) Pop-Up Warning May Occur with HP Insight NIC Agents Service on ProLiant Servers Running Microsoft Windows Server 2003 with Service Pack 1

Advisory: Database Verification May Fail on ProLiant Servers Installed with Insight Control Management 2.x (2.20, 2.30, and 2.35) When the Database Has Too Many Instances

Advisory: Defined Ethernet Network and Server Profiles in HP Virtual Connect Manager Versions 1.10 and 1.15 Display "OK" Status When All Connections to the Network Are Actually Down

Advisory: Delay in Failing Back and Possible Dropped Packets When Using "Network Fault Tolerance (NFT) with Preference Order" in NIC Teaming Software on ProLiant Servers

Advisory: Deployment of Server Migration Pack (SMP) Universal Edition 3.0 Agent Will Not Be Successful If Special Characters Are Present In the Username of the ProLiant Source Server

Advisory: Description Column in the Logical Disk Drives Report of HP Systems Insight Manager (HP SIM) 5.1 Displays the Text "Local Disk" Instead of Displaying the Actual Disk Drive Letter When the WBEM Protocol is Enabled

Advisory: Destination Server May Not Boot After Using the HP Server Migration Pack - Universal Edition 3.0 to Migrate ProLiant Servers Previously Configured with Server Migration Pack and Physical to ProLiant if the Boot Disk Is Not Set to Disk0

Advisory: Disabling NIC 1 and NIC 2 in HP BladeSystem ProLiant c-Class Blade Servers Causes NIC 3 and NIC 4 to be Unavailable

Advisory: Disabling Port Trunk On Uplinks Or XConnects May Cause STP Loop On ProLiant BL p-Class GbE2 Interconnect Switch

Advisory: Domain Import Process in HP Virtual Connect Manager Version 1.10 Will Not Complete and Will Display "Request Failed" Message if the Specified User Does Not Have Full Administrative Privileges

Advisory: Duplicate World Wide Names (WWN) May Be Generated in HP BladeSystem c-Class Virtual Connect Fibre Channel Modules When Adding Modules to an Existing Virtual Connect Domain

Advisory: During Installation of Vulnerability and Patch Management Pack (VPM) or Insight Control Data Center Edition on ProLiant Servers, an Error Message is Displayed and the Installation is Interrupted if the Password Contains Blank Characters

Advisory: Dynamic Power Capping - Certain ProLiant Servers may Experience Larger than Expected Performance Impact when using Power Management Controller Firmware Version 3.3

Advisory: Email Messages Generated by HP Insight Management Agents for Windows May Be Rejected by Certain SMTP Servers

Advisory: Emulex Fibre Channel Mezzanine Card Topology Setting Change from the Default Is Not Retained on a BladeSystem c-Class Server Blade After the Server Blade Is Rebooted

Advisory: Enabling PXE on an HP NC51xx Adapter May Cause Other Option ROM (Non-NC51xx) Adapters to Become Unlisted in the ROM-Based Setup Utility (RBSU) IPL and Unavailable for PXE Boot

Advisory: Erroneous "Driver and Firmware Versions Don't Match. Please Update the Firmware" Message Displayed in System Event Log on ProLiant Servers Running Microsoft Windows Server 2003 with a NC512m Dual Port 10GbE Multifunction BL-c Adapter

Advisory: Erroneous "Failed to Create Processor Object" Pop-Up Message May Be Displayed in HP Virtual Connect 1.10 when Attempting to Upgrade the Firmware on the HP 1/10 GB Virtual Connect Ethernet Module for c-Class BladeSystem

Advisory: Erroneous "Firmware Activation Failed" Message May Appear After Upgrading the Firmware on HP 1/10 Gb Virtual Connect Ethernet Modules for c-Class BladeSystem

Advisory: Error and Warning Messages May Be Logged to the Windows Application Event Log During the Installation of the HP Insight Management WBEM Providers

Advisory: Error Message "Insight Power Manager Could Not Communicate With Enclosure Management Processor" May Be Displayed on HP BladeSystem c-Class Enclosures Configured with Redundant Onboard Administrator Modules

Advisory: Error Message "Invalid IP Address" May Be Displayed in HP ProLiant c-Class BladeSystem Onboard Administrator When Using the IP Addressing Autofill Feature

Advisory: Error Message, "Reference to Variable or Parameter 'mpInfoDoc' Must Evaluate to a Node List" May Be Displayed on the HP Onboard Administrator Graphical User Interface (GUI)

Advisory: Error Message, "Windows Cannot Find Idlist" May Appear After a Server Migration Using Server Migration Pack (SMP)-Universal 3.5

Advisory: Error When Attempting to Import HP StorageWorks SAN Switches MIB Configuration file into HP Systems Insight Manager 4.2 on ProLiant Servers

Advisory: Executing HP Array Diagnostics Utility Command Line Interface (hpaducli) Version 7.30 (or Later) with the -v or -version Option Results in "Segmentation Fault" Message

Advisory: Extended Partitions Cannot Be Resized After a Server Migration Pack (SMP)-Physical to Virtual (P2V) Migration on ProLiant Servers

Advisory: Externally Connected Universal Serial Bus (USB) Devices May Not Appear in the Dropdown Selection List for the Integrated Lights-Out 2 (iLO 2) Virtual Media Applet When Running on a Linux Client

Advisory: Failure to Find the Proper RGS 5.2 License Results in a Gray License Text Box to be Displayed on Top of the Users Desktop that Can not Be Moved or Removed.

Advisory: FIRMWARE UPGRADE RECOMMENDED for Certain HP Smart Array Controllers to Avoid False SAS and SATA Hard Drive "Predictive Failures" Caused by Erroneous Monitoring and Performance Data

Advisory: FIRMWARE UPGRADE RECOMMENDED: Bluescreen Hardware Malfunction, ABEND, or Panic Possible When Some PCI-Express Adapters Configured in ProLiant Server

Advisory: FIRMWARE UPGRADE REQUIRED to Prevent Erroneous Drive Failures on Certain HP SATA Hard Drives Attached to HP Smart Array SAS/SATA Controllers

Advisory: FIRMWARE UPGRADE REQUIRED to Prevent Rare Potential Data Write Errors on a RAID 1 or RAID 1+0 Volume Configured on an HP Smart Array SAS/SATA or SCSI Controller in Scenario of Concurrent Background Surface Analysis and I/O Write Operations

Advisory: FIRMWARE UPGRADE REQUIRED to Prevent Rare Potential for Data Read/Write Errors on a RAID 6 or RAID 1+0 Volume Configured on Certain HP Smart Array SATA/SAS Controllers After Multiple Drive Failures and One Hot-Replacement

Advisory: FIRMWARE UPGRADE REQUIRED: HP BladeSystem c-Class Server Blades May Not Power On if Onboard Administrator is Running Firmware Version 1.0

Advisory: FTP-Based Links on the Firmware Maintenance CD Version 8.20 Home Page Do Not Function When Selected

Advisory: HARD DRIVE FIRMWARE UPGRADE RECOMMENDED to Correct Excessive "Write Error" Messages in Drive Event Log on a Very Small Percentage of Certain HP SCSI Hard Drive Models

Advisory: Health Status LED for the HP 1/10Gb and HP 10Gb Ethernet Blade Switch for c-Class BladeSystem Is Not Powered On If the Switch Is Not Powered On

Advisory: HP 1/10 Gb Virtual Connect Ethernet Module Or HP 1/10 Gb-F Virtual Connect Ethernet Module Running Virtual Connect Firmware Version 1.30 or 1.31 May Continuously Reboot on a BladeSystem c-Class Enclosure

Advisory: HP 1/10Gb Virtual Connect Ethernet Module For a ProLiant c-Class BladeSystem Does Not Support the 15 Meter CX4 Cable When Used as a Stacking Link

Advisory: HP 4Gb Fibre Channel Pass-Thru Module for HP BladeSystem c-Class May Cause HBA Ports to Exhibit Low SAN Bandwidth or Become Unresponsive Under Certain Conditions

Advisory: HP 4Gb Virtual Connect Fibre Channel Module Running Virtual Connect (VC) Firmware Version 1.30 Or 1.31 May Cause SAN Fabric Connectivity Outage on a BladeSystem c-Class Enclosure

Advisory: HP Array Diagnostics Utility (ADU) Version 7.85.16.0 (Win32) for Microsoft Windows on ProLiant Servers Does Not Display HP StorageWorks Fibre Channel (FC) 1142 SR 4Gb PCI Express Host Bus Adapter (HBA) In the "README.TXT" File

Advisory: HP Array Diagnostics Utility Version 7.50 Incorrectly Reports Total Memory Size for HP Smart Array E200 Controllers

Advisory: HP BladeSystem - Blade Server Pull-Out Tab May Contain an Incorrect Integrated Lights-Out 2 (iLO 2) Password

Advisory: HP BladeSystem - c-Class Enclosure Power Supply May Report a False N+N Redundancy Failed Message and Immediately Report a Repaired Status

Advisory: HP BladeSystem - Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem May Fail to Connect the Second Port when Using HP Fibre Channel Virtual Connect

Advisory: HP BladeSystem - HP Onboard Administrator Firmware 2.50 Displays "Unknown" for all Server Blade Names in the Insight Display (LCD), DVD Connect Screen, KVM Menu Screen, SNMP, and Alertmail Interfaces

Advisory: HP BladeSystem c3000 Enclosure - KVM Interface Module May Fail to Connect to an Attached ProLiant Server Blade

Advisory: HP BladeSystem c-Class - Integrated Lights-Out 2 (iLO 2) Integrated Remote Console (IRC) Keyboard/Mouse and Onboard Administrator (OA) Login GUI May Intermittently Slow Down or Become Unresponsive

Advisory: HP BladeSystem c-Class Enclosure Onboard Administrator Generates an Error Message if all Fields Are Not Completed in the Static IP Address Settings Screen when Using the GUI

Advisory: HP BladeSystem c-Class Enclosure Onboard Administrator GUI May Encounter "201-Series" Error Messages

Advisory: HP BladeSystem c-Class Enclosure Onboard Administrator GUI Version 1.0 May on Rare Occasions Not Be Updated When Devices Are Inserted into or Removed from the Enclosure

Advisory: HP BladeSystem c-Class Enclosure Onboard Administrator May Be Unable to Communicate with Other Enclosures Connected Through the Enclosure Link Interface

Advisory: HP BladeSystem c-Class Enclosure Rack Component Cannot Be Registered by HP Insight Control Linux Edition (ICLE) if the Enclosure is not Registered and Onboard Administrator is Running Firmware Version 2.0

Advisory: HP BladeSystem c-Class Enclosures Running Firmware Version 1.0 Do Not Ensure That Rack Names Are Identical When Linked Together Through the Ethernet Link Ports

Advisory: HP BladeSystem c-Class Onboard Administrator (OA) - OA Command Line Interface (CLI) Command "upload config" Fails When the Specified URL is Longer than 64 Characters

Advisory: HP BladeSystem c-Class Onboard Administrator Displays an Incorrect Part Number for the HP BladeSystem c-Class c3000 Server Enclosure

Advisory: HP BladeSystem c-Class Onboard Administrator Does Not Display iSCSI MAC Addresses for Multi-Function Mezzanine Cards on ProLiant c-Class Server Blades Running Microsoft Windows

Advisory: HP BladeSystem c-Class Onboard Administrator Does Not Display New MAC Addresses After MAC Addresses Have Been Changed by HP Virtual Connect Manager for ProLiant or Integrity Server Blades

Advisory: HP BladeSystem c-Class Onboard Administrator Firmware Component for Linux Version 2.10 May Display an Exception Error when the Component is Executed on a ProLiant c-Class BladeSystem Server Running SUSE Linux Enterprise Server 9 or 10

Advisory: HP BladeSystem c-Class Onboard Administrator Firmware Versions 2.01, 2.02, and 2.03 May Not Increase Enclosure Fan Speed When Temperatures Rise if a Half-Height Server Blade or Blade Workstation Is Configured in Bay 16 of the c7000 Enclosure

Advisory: HP BladeSystem c-Class Onboard Administrator GUI May Not Load Correctly After Upgrading Firmware

Advisory: HP BladeSystem c-Class Onboard Administrator with iLO Firmware Version 1.29 (or Earlier) Reports Critical Error for HP ProLiant c-Class Server Blades After Rebooting Server or Restarting Onboard Administrator

Advisory: HP BladeSystem c-Class Server Blade in an Enclosure Configured with Virtual Connect Firmware Version 1.16 Will Not Retain Default iSCSI Connection in the ROM-Based Setup Utility (RBSU)

Advisory: HP BladeSystem c-Class Server Blades Do Not Display the Rack/Enclosure/Bay Name After the System NVRAM is Cleared Via the System ROM

Advisory: HP BladeSystem c-Class Server Blades May Lose Network Connectivity When Virtual Connect Manager Server Profiles Are Placed in a "Profile Pending" State

Advisory: HP BladeSystem c-Class Virtual Connect Firmware Version 1.1x Incorrectly Detects 16 Server Bays in HP Virtual Connect Fibre Channel Modules Installed in an HP c-Class BladeSystem c3000 Enclosure

Advisory: HP BladeSystem c-Class Virtual Connect Firmware Versions 1.20 (or Earlier) May Inadvertently Cause a Domain to Revert to a Prior Domain Configuration

Advisory: HP BladeSystem- Certain c-Class Server Blades May Not Complete Power-On Self-Test (POST) or May Experience a Red Screen After Installation of the HP NC360m Dual Port 1GbE BL-c Adapter

Advisory: HP BladeSystem Integrated Manager Version 2.1 Picture View May Not Refresh the Latest Information With a Single Click on the "Last Update" Link

Advisory: HP Branded Media Windows Server 2008 (Korean) Available Via Reseller Option Kits (ROK) May Install the Default English 101/104 Keyboard Layout On a ProLiant Server

Advisory: HP Insight Control Environment for Linux System Event Log Monitor and Sensor Collection Monitor Nagios Services May Fail Due to Intermittent SSL Connection Errors

Advisory: HP Insight Diagnostics - Insight Diagnostics for Windows Version 8.3.0 Will Falsely Report the Hardware Physical Address Extension (PAE) Status as "No" Even When PAE Is Enabled

Advisory: HP Insight Diagnostics - Test Status of Device Diagnostics in HP Insight Diagnostics Version 8.15 Indicates "Unknown" for Logical Drives

Advisory: HP Insight Diagnostics for Linux Version 7.9.0 May Incorrectly Display the Slot Number as Slot 0 for All Installed Option Cards in ProLiant Servers

Advisory: HP Insight Diagnostics Offline Edition 8.3.0 - Multiple Diagnostic Tests May Falsely Fail if the "Begin Testing" Button Is Clicked More Than Once

Advisory: HP Insight Diagnostics Online Version 8.00 for Linux User Interface May Stop Responding and Cease Loading Test Modules Before the Progress Bar Reaches 100 Percent

Advisory: HP Insight Diagnostics Survey Report May Not Display the DIMM Description and Spare Part Number Information Under the Serial Presence Detect (SPD) Section For Some of the DIMMs Installed in a ProLiant Server

Advisory: HP Insight Diagnostics Version 7.7.0 Displays "No Media Devices Detected" Message when Attempting to Save Message Logs Onto External Media

Advisory: HP Insight Diagnostics Version 7.7.0 Does Not Display Disk Diagnosis Information in the Log After Performing Diagnostic Tests

Advisory: HP Insight Diagnostics Version 7.9.0 May Report Processor Package Information Incorrectly on ProLiant Servers Configured with Intel Quad-Core Processors Operating in a Dual-Core Configuration

Advisory: HP Insight Management WBEM Provider 2.4.0 for Windows - Memory Leak in "Handle Count" and/or "Private Bytes" May Be Observed in WMI Processes When the Server Platform Providers Are Handling Continuous Requests

Advisory: HP Insight Management WBEM Providers - Configurable Server WMI Properties Are Not Preserved When Upgrading from Version 2.1 or Version 2.2 to Version 2.3

Advisory: HP Insight Management WBEM Providers 2.3.0.0 - Host Discovered Resources (HDR) WMI Provider May Cause a Handle Leak in Windows Server 2008 x64

Advisory: HP Insight Management WBEM Providers For Windows Server 2003/2008 Version 2.1.0.0 May Not Be Able to Perform Software Upgrades Without First Uninstalling Older Versions on a ProLiant Server

Advisory: HP Insight Management WBEM Providers May Display the Size Of Installed Packages Incorrectly Within the Add/Remove Programs Control Panel Applet on a ProLiant Server

Advisory: HP Insight Management WBEM Providers Version 2.3.0.0 - Windows Management Instrumentation (WMI) CIM Studio May Display An Error Message Or SAS Card Information When Querying for Certain Fibre Channel Classes

Advisory: HP Insight Orchestration 1.0 - Insight Dynamics - VSE Logical Servers May Cause Node Conflicts in HP Systems Insight Manager (HP SIM)

Advisory: HP Insight Power Manager - Incorrect Data May Be Reported When More Than One Enclosure Is Selected

Advisory: HP Insight Power Manager Displays Message "iLO2 is not Having Advanced or Select License" on ProLiant Servers

Advisory: HP Insight Power Manager May Not Display Power History Data Collected from an HP BladeSystem c-Class Enclosure if the Date/Time Settings in Onboard Administrator Do Not Match the Time Settings in HP Insight Manager (HP SIM)

Advisory: HP Insight Server Migration Software (SMP) - Installation of HP Insight Virtual Machine Manager Software (VMM) 3.6 or 3.7 Uninstalls the "Install SMP Agent" Tools from HP Systems Insight Manager (HP SIM)

Advisory: HP Insight Server Migration Software for ProLiant (SMP) - Mouse and Keyboard Drivers May Not Load After a Successful SMP Physical to ProLiant (P2P) Server Migration of a Windows Operating System

Advisory: HP Insight Server Migration Software- Migration to a Destination Server On Which Hard Disk Drives Are Already Configured May Fail During the Disk Cloning Operation

Advisory: HP Instant Support Enterprise Edition (ISEE) Version A.03.95.500.024 Will Not Install if the Required .MSI File(s) Are Not Present on the ProLiant Server Prior to ISEE Installation

Advisory: HP Integrated Lights-Out (iLO) and HP Integrated Lights-Out 2 (iLO 2) Will Not Accept Login via HP Lights-Out Configuration Utility (CPQLOCFG.EXE) with Passwords That Contain a "Less Than" (<) or "Greater Than" (>) Character

Advisory: HP Integrated Lights-Out (iLO) and Integrated Lights-Out 2 (iLO 2) Virtual Media May Disconnect Prematurely During Microsoft Windows Operating System Installations and When Attempting to Reboot a Server

Advisory: HP Integrated Lights-Out (iLO) Migration Utility Version 2.01 May Display Error Message When Integrating with Novell eDirectory Version 8.7.3.7

Advisory: HP Integrated Lights-Out 2 (iLO 2) - During Leap Years, the iLO 2 Clock Advances from 30 December to 01 January

Advisory: HP Integrated Lights-Out 2 (iLO 2) - HP Lights-Out Online Configuration Utility Fails to Initialize if Microsoft .NET Framework 2.0 is Not Installed

Advisory: HP Integrated Lights-Out 2 (iLO 2) - iLO 2 May Stop Responding when HP Systems Insight Manager (HP SIM) 5.3 Discovery Task is Executed

Advisory: HP Integrated Lights-Out 2 (iLO 2) - iLO 2 May Trigger an Automatic Server Recovery (ASR) During a Network Broadcast Storm

Advisory: HP Integrated Lights-Out 2 (iLO 2) - Opening iLO 2 Remote Console Session While iLO 2 Firmware Upgrade is in Progress May Result in an Unusable iLO 2 Firmware Image

Advisory: HP Integrated Lights-Out 2 (iLO 2) - Power Regulator Mode Set for "HP Dynamic Power Savings Mode" or "OS Control Mode" May Force the Processor Power State to the Highest Performance P-State (P0)

Advisory: HP Integrated Lights-Out 2 (iLO 2) - Unable to Browse to iLO 2 using Internet Explorer 7.0 Running on Windows Server 2003

Advisory: HP Integrated Lights-Out 2 (iLO 2) - Windows Serial Debugger May Not Respond to Input from iLO 2 Virtual Serial Port

Advisory: HP Integrated Lights-Out 2 (iLO 2) Command Prompt May Be Temporarily Inaccessible if an Invalid URL or IP Address Is Inadvertently Attempted Using the Remote Serial Console or iLO Virtual Serial Port CLP Command Oemhp_sshloadkey

Advisory: HP Integrated Lights-Out 2 (iLO 2) Firmware Version 1.20 (or Earlier) Does Not Support Configuring the Shared Network Port Using the Systems Management Command Line Protocol (SM-CLP)

Advisory: HP Integrated Lights-Out 2 (iLO 2) Firmware Version 1.42 May Cause Microsoft Windows Server 2003 Boot Loader to Pause at OS Selection Menu on Some ProLiant Servers and Requires User Intervention to Continue the Boot Process

Advisory: HP Integrated Lights-Out 2 (iLO 2) May Not Be Accessible From the HP BladeSystem c3000 and c7000 Enclosure Service Port

Advisory: HP Integrated Lights-Out 2 (iLO 2) with Firmware Version 1.20 (or earlier) Will Not Allow a USB CD-ROM to be Mounted as a Virtual Media Device

Advisory: HP Lights-Out Online Configuration Utility (HPONCFG) - HPONCFG Version 2.1.0.1 for Windows Server 2003/2008 x64 Edition Does Not Run on Windows XP Professional Edition x64

Advisory: HP Lights-Out Online Configuration Utility for Linux - HPONCFG Stops Communicating with the Integrated Lights-Out (iLO / iLO 2) if iLO / iLO 2 Has Been Reset/Rebooted

Advisory: HP Management Agents for VMware ESX Server Version 7.60 (or Earlier) May Fill CMA.Log with Error Message "modinfo: bonding: no module" on ProLiant Servers Running VMware ESX Server 2.5.x or VMware ESX Server 3.0.x

Advisory: HP NC364m Quad Port 1GbE BL-c Adapter - Ethtool and System Management Homepage (SMH) for Linux Incorrectly Report Link Status as Connected for NC364m Quad Port 1GbE BL-c Adapter When BladeSystem c7000 Enclosure Interconnect Bay Is Not Populated

Advisory: HP NC373i Integrated Multifunction Gigabit Server Adapter - "PXE-E61:Media Test Failure, Check Cable" Message Displayed During PXE Boot After Adapter Upgrade to Boot Code Later Than 1.9.6 With HP Virtual Connect Flex-10 10GB Ethernet Module

Advisory: HP NC532x Dual Port 10GbE Multifunction BL-c Adapter - NIC Will Not Be Displayed Correctly in SNMP or WMI HP Management Utilities When Using Drivers From NCDE Earlier Than Version 9.35

Advisory: HP NC-Series Broadcom 1Gb Multifunction Driver for Windows Server 2008 - Erroneous Message, "Could Not Load Driver Software" Displayed in "View Problem Summary" Page in Control Panel After NC-Series Broadcom 1Gb Multifunction Driver Is Installed

Advisory: HP NC-Series Broadcom Adapters - When Using HP Virtual Connect Flex-10 10Gb Ethernet Module, the HP NC-Series Broadcom 1Gb Multifunction Adapters Will Not Correctly Negotiate Speed if Forced to 2.5Gbps Using the Network Configuration Utility

Advisory: HP NC-Series Broadcom Network Adapters - Windows Server 2003 Blue Screen May Occur Under High Network Utilization After Upgrading the Multifunction Driver from the SmartStart Version 8.15 CD to the Web Release of NCDE Version 9.40

Advisory: HP NC-Series Intel Driver for Linux (e1000) May Not Negotiate at 1000/Full As Expected When Forcing the Speed/Duplex Using Certain Versions of Ethtool Command

Advisory: HP NC-Series Network Interface Controllers (NICs) May Not Join NIC Team During Initialization When Using Certain Versions of Network Configuration Utility for Windows on ProLiant Servers

Advisory: HP NC-Series NetXen 10 Gigabit Server Adapters - Kernel Panic or Unresponsiveness May Occur in X Window System Under Certain Conditions After Upgrading the Network Server Adapter Firmware to Version 4.0.304-1 on ProLiant Server Running Linux

Advisory: HP NC-Series NICs - NC-Series Broadcom 1Gb Multifunction Driver May Not Install Silently On a ProLiant Server When Running Windows Server 2003 Or Windows Server 2008

Advisory: HP Network Configuration Utility (NCU) Commands Cannot Be Run From an Opened Command Window if the Command Window is Already Open During an Installation or Upgrade of the NCU

Advisory: HP Network Configuration Utility (NCU) for Windows Server - "An Error Occurred Due to Invalid Data in the XML File Used by This Application" Message Displayed After Selecting the VLAN Tab Under Properties

Advisory: HP NIC Agents for Red Hat Enterprise Linux 5 Version 7.80 (or Earlier) Do Not Report Network Statistic Counters for HP ProLiant Servers When SELinux Is Enabled

Advisory: HP Onboard Administrator - A New Browser Window Will Not Be Opened When Connecting to the HP Integrated Lights-Out (iLO) of a Server Blade in the Same Bay Number of a Different Enclosure

Advisory: HP Onboard Administrator - Enclosure Bay IP Addressing (EBIPA) May Not Function Properly if Multiple Subnets Are Used in the Address Range Configuration

Advisory: HP Onboard Administrator- OA Firmware Version 2.25 "SET EBIPA NONE" CLI Command Results in Improper Enclosure Bay IP Addressing Entries

Advisory: HP Onboard Administrator - OA Firmware Version 2.25 (or Earlier) May Report False Power Supply Removal and Insertion Events

Advisory: HP Onboard Administrator - The "Show Config" Command Does Not Include the "Assign Server" Output

Advisory: HP Onboard Administrator - Using the "Lost Password" Function After Upgrading to Onboard Administrator Firmware Version 2.40 May Result in Insufficient Privileges and Lock Symbols in the GUI

Advisory: HP Onboard Administrator (OA) - The HP BladeSystem c-Class Standby OA Network Interface May Not Initialize

Advisory: HP Onboard Administrator May Report False Topology Information for HP ProLiant c-Class BladeSystem

Advisory: HP Performance Management Pack (PMP) - PMP Version 5.2.2 (or Earlier) Does Not Detect VMware ESXi 4.0 Host as a Performance Manageable Device

Advisory: HP Performance Management Pack (PMP) Version 5.0 - Upgrading to PMP Version 5.0 May Not Succeed When Running Oracle Database 10g

Advisory: HP ProLiant c-Class BladeSystem Fan Speed May Remain High if the Server Blades Are Not Allowed to Complete POST Before the Blades are Powered Off

Advisory: HP ProLiant c-Class BladeSystem Virtual Connect Manager May Not Be Able to Communicate with Onboard Administrator and May Generate a "Virtual Connect Manager not at this Address" Message

Advisory: HP ProLiant c-Class Server Blades May Occasionally Be Unable to Log Into the SAN Fabric When HP Virtual Connect FC Modules (VC-FC) Are Used with Cisco MDS 9513 Multilayer Director

Advisory: HP ProLiant Essentials Performance Management Pack (PMP) Version 4.3 Displays "Unsupported Configuration" Message When Attempting to License and Monitor ProLiant BL460c and ProLiant BL480c Server Blades

Advisory: HP ProLiant Essentials Virtual Machine Management Pack Version 2.x GUI Becomes Unresponsive When HP Systems Insight Manager Central Management Server Fails Over to Secondary Server in Microsoft Cluster Server Environment

Advisory: HP ProLiant Essentials Vulnerability and Patch Management (VPM) Pack Version 2.2.2 - Targeted ProLiant Servers Running Linux May Not Be Successful at Performing the "Deploying Patches and Fixes" Task

Advisory: HP ProLiant Firmware Maintenance CD - Power Management Controller Firmware Cannot be Updated When Server Is Booted to Firmware Maintenance CD Version 8.60

Advisory: HP ProLiant Firmware Maintenance CD - Unable to Boot to Firmware Maintenance CD Image on USB Key Using Integrated Lights-Out 2 (iLO 2) Virtual Media

Advisory: HP ProLiant iLO 2 Management Controller Driver - Driver Version 1.9.0.0 May Prevent Windows Server 2003 or Windows Server 2008 from Completing a Shutdown or Restart Request

Advisory: HP ProLiant Management Directories Support Software 2.01 - HP Management Devices Schema Extender Cannot be Installed on Windows 2008 Core Enterprise

Advisory: HP ProLiant ROM-Based Setup Utility (RBSU) Displays Last Few Lines Incorrectly When Accessed Through Integrated Lights-Out 2 (iLO 2) Version 1.50 (or Earlier) and iLO 2 Remote Serial Console

Advisory: HP ProLiant Server May Stop Responding when Using a USB Key as an Integrated Lights-Out 2 (iLO 2) Virtual Media Device to Boot MS-DOS

Advisory: HP ProLiant Servers - Error Messages May Be Displayed When Updating the Power Management Controller Firmware Using Online Flash Components

Advisory: HP ProLiant Servers - Integrated Lights-Out 2 Virtual Media ISO Image or CD-ROM Drive Is Not Displayed When Attempting to Map Virtual Device on an HP ProLiant Server Running Windows Server 2008 x64 R2

Advisory: HP ProLiant Servers - Power Management Controller Firmware May Not Be Properly Upgraded When Using Certain Flash Update Components

Advisory: HP ProLiant Servers May Not Establish Network Connectivity After Attempting to Install a Server Image

Advisory: HP ProLiant Servers Running NetWare 6.5 SP7 (or Later) - Older Versions of ETHERTSM.NLM and MSM.NLM Are Installed with NC-Series NIC Drivers from the HP ProLiant Support Pack for NetWare Versions 7.60 through 8.10

Advisory: HP ProLiant Servers Running NetWare 6.5: HP NC-Series NICs - HP ProLiant Support Pack Version 7.70 (or Later) Does Not Upgrade Certain NIC Drivers to Driver Version 10.xx Using CPQDPLOY.NLM

Advisory: HP ProLiant Servers: Smart Array Controllers - Reduced Performance May Occur Under Sun Solaris 10 (x86) When Running cpqary3 Version 1.91 (or Earlier) and the HP Storage Agents for Solaris Under High Disk I/O

Advisory: HP QLogic Fibre Channel Host Bus Adapter and Attached HP StorageWorks Enclosure May Not Appear on the HP System Management Homepage or in HP Systems Insight Manager on an HP ProLiant Server Running VMware ESX Server 3.0.2 Update 1

Advisory: HP Server Migration Pack - Universal Edition 3.50 and 3.51 Migration May Stop Responding When Windows Server 2008 is the Application Station and the NTFS Partitions Are Resized Prior to the Migration

Advisory: HP Server Migration Pack-Universal 3.0 Does Not Automatically Migrate Licenses if a Previous Version of Server Migration Pack (SMP) Has Been Uninstalled Before Upgrading to SMP-Universal 3.0

Advisory: HP Server Updates Catalog for System Center Configuration Manager (SCCM) 2007 - SCCM Does Not Detect Firmware Versions when Insight Management WBEM Providers Version 2.3.0.0 Is Installed on a Managed ProLiant Server

Advisory: HP Smart Array E200 Or HP Smart Array E200i Firmware Version 1.80 (Or Earlier) - FIRMWARE UPGRADE RECOMMENDED for ProLiant Servers Running Windows Server 2003 To Prevent A Blue Screen And STOP Error Message

Advisory: HP Smart Update Manager - Deploying iLO/iLO 2 Firmware Directly to the iLO/iLO 2 NIC Port or Uploading a New Firmware Image Through the iLO/iLO 2 CLI May Cause the iLO/iLO 2 NIC Port IP Address to be Changed

Advisory: HP Smart Update Manager - the iLO/iLO 2 Firmware Update May Be Reported as a Failure by HP Smart Update Manager Version 3.4.0 when the iLO/iLO 2 Firmware is Updated Through Both the Server and Directly to the iLO NIC Port

Advisory: HP Smart Update Manager May Display the Error Message: "An Unhandled Win32 Exception In hpsum_discagnt.ext" When Using the Daemon Tools Utility On a ProLiant Server

Advisory: HP SmartStart - Assisted Installations of SmartStart Without SNMP or WMI Options Selected May Not Automatically Install all Drivers and Software

Advisory: HP SNMP Agents (hp-snmp-agents) - Unsuccessful Parsing Messages are Generated by HP SNMP Agents for Red Hat Enterprise Linux 4 or Red Hat Enterprise Linux 5 Version 8.0.0 (or later) if Server is Rebooted or if SNMP Daemon is Restarted

Advisory: HP System Management Homepage - Group Configuration on ProLiant Servers Running Linux Does Not Function Properly for Three Repeated User Groups in Different Authorization Levels

Advisory: HP System Management Homepage - Link to Performance Management Pack (PMP) May Launch Incorrect Browser Page

Advisory: HP System Management Homepage (SMH) - Error While Creating PKCS#10 Certificates in SMH after Installing Linux Support Pack 8.00, 8.10, or 8.15

Advisory: HP System Management Homepage (SMH) - Fibre Channel HBA Location Information Intermittently Displayed as "N/A"

Advisory: HP System Management Homepage (SMH) - Network Teaming Information Is No Longer Viewable in SMH if the Team Name Is Changed

Advisory: HP System Management Homepage (SMH) - Security Warning Displayed when Browsing to SMH from Internet Explorer 7 (IE7) using IPv6 Addresses

Advisory: HP System Management Homepage (SMH) - SMH Version 3.0 Will Not Install on Windows Small Business Server 2008 when the Default Domain is Removed and Added to a Different Domain

Advisory: HP System Management Homepage (SMH) 3.x - SMH Does Not Function Properly when HP Insight Management WBEM Providers 2.1, 2.2, or 2.3 are Uninstalled

Advisory: HP System Management Homepage (SMH) for Linux - the hpsmh User-ID (UID) and the hpsmh Group-ID (GID) That Are Assigned After Installing SMH on ProLiant Servers Using the ProLiant Support Pack May Not Be a Typical UID and GID

Advisory: HP System Management Homepage (SMH) for Windows - SMH Configuration Values Are Not Preserved While Upgrading from Version 3.0.0 or 3.0.1 to Version 3.0.1 or 3.0.2

Advisory: HP System Management Homepage (SMH) May Incorrectly Report Microsoft Windows File System Space - "Percent Space Used" On a ProLiant Server

Advisory: HP System Management Homepage (SMH) May Not Display "Storage File System Space Used" for USB Storage Devices That Are Auto-Mounted After Reboot on ProLiant Servers Running SUSE LINUX Enterprise Server 9 SP3

Advisory: HP System Management Homepage (SMH) Version 2.1.11.197 (Available On ProLiant Support Pack (PSP) Version 8.00) May Report the Error: "Page Cannot Be Displayed" On a ProLiant Server

Advisory: HP System Management Homepage (SMH) Will Not Install Correctly if Name Creation is Disabled in the Microsoft Windows Registry

Advisory: HP System Management Homepage Displays 750 GB SATA Hard Drive Capacity as 186.64 GB on ProLiant Servers Running HP System Health Application and Insight Management Agents for Linux Version 7.60

Advisory: HP System Management Homepage May Be Inaccessible on HP ProLiant Server if Linux Firewall Configuration Blocks Ports 2301 and 2381

Advisory: HP System Management Homepage May Not Display Information for a QLogic Host Bus Adapter or Attached Storage System When Running VMware ESX Server 3.5.0 and HP Insight Management Agents Version 7.9.1

Advisory: HP Systems Insight Manager (HP SIM) - Cisco LAN Switches Discovered by HP SIM May No Longer Appear in BladeSystem Integrated Manager

Advisory: HP Systems Insight Manager (HP SIM) - During the Identification Stage, an Invalid WBEM Event May Be Logged in the HP SIM 5.3 Event Log for Certain Managed Nodes

Advisory: HP Systems Insight Manager (HP SIM) - Foundation Agents Selection in Replicate Agent Settings Is Not Available When the Source Server Is Running HP System Management Homepage 3.x and HP Insight Management Agents 8.30 (or earlier)

Advisory: HP Systems Insight Manager (HP SIM) - Simple Network Management Protocol (SNMP) May Be Unsuccessful At Performing the Data Collection Task When Targeting a ProLiant Server Running Red Hat Enterprise Linux 4 Or SUSE Linux Enterprise Server 9

Advisory: HP Systems Insight Manager (HP SIM) 4.2 (or Earlier) Menus May Disappear from View

Advisory: HP Systems Insight Manager (HP SIM) 4.2 SP2 (or Earlier) Systems and Events Page May Display Orphan Records and Servers with the Name "Serv_"

Advisory: HP Systems Insight Manager (HP SIM) 5.0 Displays IP Address for Only One Network Adapter in Managed ProLiant Server

Advisory: HP Systems Insight Manager (HP SIM) 5.0 SP5 Performance May Be Less Than Optimal in Certain System Environments

Advisory: HP Systems Insight Manager (HP SIM) 5.1 May Stop Responding When Many Automatic Event Handling (AEH) Tasks are Created, Copied, or Edited

Advisory: HP Systems Insight Manager (HP SIM) 5.1 SP1 with BladeSystem Integrated Manager 2.4 (or Earlier) Cannot Display Power Enclosure Status for Enclosures That Contain ProLiant Server Blades with Integrated Lights-Out 2 (iLO 2)

Advisory: HP Systems Insight Manager (HP SIM) 5.1 System Properties Contract and Warranty Information Section Does Not Contain a Complete List of System Country Codes

Advisory: HP Systems Insight Manager (HP SIM) 5.2 Cluster Monitor May Fail to Display Cluster Data Information

Advisory: HP Systems Insight Manager (HP SIM) 5.3 - HP SIM 5.3 Cannot Be Installed on a Remote SQL Server Database Using a Port Other than the Default Port

Advisory: HP Systems Insight Manager (HP SIM) Command Line Utility MXEXEC May Fail or JAVA Errors May Occur if the KNOWN_HOSTS File Contains Spaces in the Host Names

Advisory: HP Systems Insight Manager (HP SIM) Console - System and Event Collections Panel May Be Slow to Display

Advisory: HP Systems Insight Manager (HP SIM) Data Collection Task May Fail with Message "An Error Occurred Connecting to This System with the WBEM Protocol"

Advisory: HP Systems Insight Manager (HP SIM) May Discard SNMP Traps from Linux Servers Connected to Two (or more) Networks

Advisory: HP Systems Insight Manager (HP SIM) May Experience Sub-Optimal Performance When Managing 1000 or More Devices

Advisory: HP Systems Insight Manager (HP SIM) May Not Display System Information on ProLiant Servers Running HP System Health Application and Insight Management Agents for SUSE LINUX Enterprise Server 9 (AMD64/EM64T)

Advisory: HP Systems Insight Manager (HP SIM) Running in an Environment with a Large Number of WBEM Managed Nodes May Experience Task Page Interface Slowdown or Out of Memory Errors

Advisory: HP Systems Insight Manager (HP SIM) Version 5.3 - HP SIM Configured with HP Performance Management Pack (PMP) Version 5.0 May Stop Responding

Advisory: HP Systems Insight Manager Displays Degraded Health Status but no Degraded Items Displayed in System Management Homepage on ProLiant Servers with iLO 2 and Running HP Insight Management Agents for Windows Version 7.51

Advisory: HP Systems Insight Manager May Not Correctly Identify Daylight Saving Time for Antarctica, Australia, Caicos, Haiti, Honduras, Turks, Syria and New Zealand

Advisory: HP Systems Insight Manager Version 4.20 SP2 Menus May Not Display or Links May Not Function on ProLiant Servers Running McAfee VirusScan Software

Advisory: HP Systems Management Homepage (SMH) Does Not Display Expected PCI Device Information on ProLiant Servers Running Windows Server 2003 or Windows Server 2008 Japanese Editions and HP Insight Management WBEM Providers for Windows

Advisory: HP TFT5600 RKM Attached to HP IP Console Switch or HP KVM Server Console May Lose Video Signal and Display "Signal Out of Range" While Installing Microsoft Windows Server 2003

Advisory: HP Version Control Agent - "Internal Server Error" Will Be Displayed if the Version Control Agent (VCA) Repository Password Contains Certain Special Characters

Advisory: HP Version Control Agent (VCA) Service May Fail to Start After Upgrading to Version 2.1.10.800

Advisory: HP Version Control Repository Manager (VCRM) Version 2.1 (or Earlier) Running Microsoft Windows May Report That Linux RPM Files and Components Have Been Deleted In the Repository After an Automatic Update

Advisory: HP Virtual Connect (VC) 8Gb 24-Port Fibre Channel (FC) Module - Uplink Port May Become Disabled When N_Port ID Virtualization (NPIV) Capability Is Lost

Advisory: HP Virtual Connect (VC) Modules Running Firmware Version 1.15b (or Earlier) May Experience Link Errors, Connectivity Errors or Excessive CRC Errors When Connected to Some External 10Gb Devices

Advisory: HP Virtual Connect (VC) Network Uplink Ports May Form a Temporary Transient Network Loop Under Normal Uplink Failover When a Race Condition Exists Between Multiple VC Ethernet Modules Selecting an Uplink Port

Advisory: HP Virtual Connect 8Gb 24-Port Fibre Channel Module - ProLiant c-Class Server Blades May Take Up to 25 Seconds To Redistribute Disabled Uplink Port Server Connections

Advisory: HP Virtual Connect Manager (VCM) May Assign the Same World Wide Name (WNN) to Both Fibre Channel (FC) Mezzanine Cards In an HP c-Class BladeSystem Server and Will Not Allow the Server to Connect to the External Storage Area Network (SAN)

Advisory: HP Virtual Connect Manager May Not Immediately Update the Total Number of Alerts in the Domain Status Summary Screen

Advisory: HP Virtual Connect Manager Performance May Be Impacted When an HP 4 GB Virtual Connect Fibre Channel Module is Connected to a Fabric Switch Port Without NPIV Enabled

Advisory: HP Virtual Connect Manager Reports HP 4Gb Virtual Connect Fibre Channel or HP 1/10 Gb Virtual Connect Ethernet Module as "Missing" or "Incompatible" After Being Removed or Replaced with Different Module Type

Advisory: HP Virtual Connect Manager User Interface May Not Load with Microsoft Windows Internet Explorer 6.0 or 7.0 Unless "Western European (ISO)" Language is Selected

Advisory: HP Virtual Connect Module for HP c-Class BladeSystem May Lose Communication with Onboard Administrator (OA) After an OA Failover or Replacement and Server Blades May Not Power On

Advisory: HP Virtual Machine Management (VMM) Plug-in for a Virtual-2-Virtual (V2V) Migration Displays a Java Error Message After the Source Virtual Machine is Selected

Advisory: HP Virtual Machine Management Pack Operations that Depend on VMware VirtualCenter 2.5, Such As Move, Copy, or Live Move, May Not Complete

Advisory: HP Vulnerability and Patch Management (VPM) Cannot Reach the Database Server in a Distributed Environment When the Database Server and the Server Used for VPM Installation Are Not in the Same Windows Domain

Advisory: HP Vulnerability and Patch Management Pack - The VPM Installer Rejects Passwords with Non-Alphanumeric Characters on Servers Running Microsoft Windows Operating Systems

Advisory: HP Vulnerability and Patch Management Pack - VPM External Patch Acquisition Tool Version 3.00.32 Fails to Download the Patches From the Microsoft and Red Hat Websites

Advisory: HP Vulnerability and Patch Management Pack (VPM) 3.0 - The VPM Patch Installation Will Fail If the "Add or Remove Programs" Window Is Open on the Target System

Advisory: HP Vulnerability and Patch Management Pack (VPM) in HP Systems Insight Manager (HP SIM) Displays Fixes and Patches Available for Linux Target Servers That Do Not Apply to the Linux Target Servers

Advisory: HP Vulnerability and Patch Management VPM 2.0.3 (or Earlier) Patch Acquisition Process May Stop Unexpectedly When the Proxy Server Attempts to Establish a Connection

Advisory: HP Vulnerability Patch Management (VPM) Version 2.0.3 Is Not Supported on HP Systems Insight Manager (HP SIM) Version 5.0 (Without SP2) Even Though the VPM Installer Incorrectly Allows the Installation to Complete

Advisory: HPASM Package for Insight Management Agents Version 7.8.0 Logs Error Messages in the HPMGMTLOG File During the Upgrade or Uninstall Process on ProLiant Servers Running VMware ESX Server 2.5.x

Advisory: I/O Mismatch or Ekey Fault is Not Consistently Reported by HP Virtual Connect Manager Version 1.10 for the Interconnect and the Server Blade

Advisory: IDE Storage Devices May Not Be Displayed on HP System Management Homepage for ProLiant Servers Running Microsoft Windows Server 2008

Advisory: If a Virtual Connect GUI Configuration Operation is Being Performed on an HP ProLiant c-Class BladeSystem and an Onboard Administrator Failover Occurs, the Message "SOAP Response was Unparseable" May Be Displayed

Advisory: If the "Boot Destination VM Automatically" Option is Selected After a ProLiant to Virtual or Virtual to Virtual (P2V/V2V) Migration of a Windows 2000 Server Operating System, a Blue Screen May Occur When the Destination Server is Booted

Advisory: If WBEM is Enabled in HP Systems Insight Manager (HP SIM) 5.1, the Logical Disk Drives Report (in the General Category) Incorrectly Displays Disk Usage as 100 Percent for all Disk Drives

Advisory: In Certain Versions of HP System Health Application and Command-Line Utilities, ProLiant Linux Management Utilities (hpasmcli and hplog) May Stop Responding Under Rare Circumstances on ProLiant Servers Running Red Hat Enterprise Linux 5.1 or 5.2

Advisory: Incorrect Entry in .INF File For HP NC-Series Broadcom 1 GB Multifunction Network Driver May Cause a Yellow Bang to Appear in Windows Device Manager During the Installation of NIC Smart Components on a ProLiant Server Running Windows Server 2003

Advisory: Incorrect Level 2 Cache Information for Quad-Core Processors Provided to System Management Homepage and Systems Insight Manager by Insight Management WBEM Providers for Windows Server 2003/2008 Version 2.2.0.0

Advisory: Initial PXE Boot May Fail During Deployment of Microsoft Windows 2000 Server or Microsoft Windows Server 2003 to a VMware ESX 3.0.1 Server-Based x86 Virtual Machine Using Rapid Deployment Pack-Windows Edition 3.50

Advisory: Insight Control Environment for Linux (ICE-Linux) Version 2.00 and Version 2.00.01 Do Not Support ProLiant Support Pack (PSP) Version 8.10 (or Later) for Kickstart or AutoYast OS Installations

Advisory: Insight Control Management Installation Will Not Install HP System Insight Manager If the Target Is Installed with a System Management Homepage that Is Later Than the Version on the Insight Control Management DVD

Advisory: Insight Control Management Installer 2.00 Will Display an Error Message and the Installation Will Fail if the HP BladeSystem Integrated Manager 3.0 (or later) Is Installed First

Advisory: Insight Control Management Removal of Software Update Proxy Selection Results in Incorrect Proxy Data in HP Systems Insight Manager

Advisory: Installation of HP ProLiant Support Pack for Red Hat Enterprise Linux 4 or 5 (Prior to Version 7.90) Will Not Find Temporary File Storage on Manually Partitioned Drive

Advisory: Installation of Microsoft Windows 2000 or Windows Server 2003 Operating System Is Unsuccessful Using Remote Installation Services (RIS) on ProLiant Servers Configured with Certain HP NC-Series Multifunction Gigabit Server Adapters

Advisory: Installation of ProLiant Support Pack After an SMP-Universal Migration of Windows 2000 Server or Advanced Server (with SP4) to a Destination Server with the Emulex LPe1105-HP 4Gb FC HBA May Cause a Blue Screen on the Destination Server

Advisory: Installation Of Red Hat Enterprise Linux 3 (x86/AMD64/EM64T) Update 7 (or Earlier) Stops Responding when Installing with Virtual Media CD-ROM Through Integrated Lights-Out 2 (iLO 2)

Advisory: Installation of the Virtual Machine Manager (VMM) 3.0 Agent on a Microsoft Windows VM Host Fails When the HP Server Migration Pack-Universal 3.0 VM Host Agent Service Is Also Running on the VM Host

Advisory: Installation of VMware ESX Server 3.0.2 (or Later) on a ProLiant Server Displays the Virtual Machine File System (VMFS) Partition as "Unknown" in the Partition List of the Installation Wizard

Advisory: Installed Software and Firmware Inventory on HP Version Control Agent (VCA) Homepage May Display Numeric/Alphanumeric Characters Instead of the Component Name

Advisory: Integrated Lights-Out - HP Lights-Out Online Configuration Utility (Hponcfg) for Linux Version 1.9 Requires Version 8.20 (or Later) of the HP System Health Application and Command Line Utilities

Advisory: Integrated Lights-Out (iLO) and Integrated Lights-Out 2 (iLO 2) May Not Obtain an IP Address Lease from Some DHCP Servers

Advisory: Integrated Lights-Out (ILO) or ILO 2 Boot of Server Does Not Occur when Application Station has Multiple Network Adapters Connected to Different Networks Using Server Migration Pack (SMP) Universal Edition Attempting a V2P or P2P Migration

Advisory: Integrated Lights-Out (iLO) Virtual Media Applet and Integrated Remote Console (IRC) May Display Local Media Drive A: When a Floppy Disk Drive Is Not Present in a Client System Running Microsoft Windows Vista

Advisory: Integrated Lights-Out 2 (iLO 2) - Blank Screen Displayed on Integrated Remote Console for HP ProLiant Server with a Video Resolution Setting of 1280 x 1024 and Running SUSE Linux Enterprise Server 11

Advisory: Integrated Lights-Out 2 (iLO 2) - Integrated Remote Console Fails to Start When Using Internet Explorer 8 (IE8) Beta 2

Advisory: Integrated Lights-Out 2 (iLO 2) Browser Interface May Indicate Incorrect Average Power Values on HP ProLiant Server

Advisory: Integrated Lights-Out 2 (iLO 2) CLP Command Used to Power the Server Off May Result in Message "Failed to Power Off Server" Even Though ProLiant Server Powers Off

Advisory: Integrated Lights-Out 2 (iLO 2) Firmware Version 1.30 (or Earlier) May Not Boot to Scripted Virtual Media When the iLO 2 Gateway is Invalid

Advisory: Integrated Lights-Out 2 (iLO 2) Firmware Version 1.70 (Or Earlier) And iLO 2 Management Controller Driver Version 1.9.0 Or 1.11 - ProLiant Server May Unexpectedly Reboot And Display Event ID 57 Error Messages

Advisory: Integrated Lights-Out 2 (iLO 2) Idle Connection Timeout Appears Non-Functional for Microsoft Active Directory Users

Advisory: Integrated Lights-Out 2 (iLO 2) Integrated Remote Console (IRC) May Become Inactive or Disconnect When Running During Periods of High Activity

Advisory: Integrated Lights-Out 2 (iLO 2) Integrated Remote Console (IRC) May Stop Responding if the ProLiant Server is Restarted Multiple Times from the iLO 2 Virtual Serial Port (VSP)

Advisory: Integrated Lights-Out 2 (iLO 2) Integrated Remote Console Issues When Running iLO 2 Firmware Version 1.20 (or Earlier) and Using Virtual Media Images

Advisory: Integrated Lights-Out 2 (iLO 2) Login Page May Not Display Correctly in Certain Browser Configurations

Advisory: Integrated Lights-Out 2 (iLO 2) May Issue the Message "Failed to Connect to Server" When Attempting to Establish an Integrated Remote Console (IRC) Session

Advisory: Integrated Lights-Out 2 (iLO 2) Remote Console and Virtual Media Applets May Not Operate as Expected When Accessed With Java Runtime Environment (JRE) Version 1.5.x or Version 1.6.x

Advisory: Integrated Lights-Out 2 (iLO 2) Remote Console Computer Lock Feature Does Not Function with Linux Gnome GUI

Advisory: Integrated Lights-Out 2 (iLO 2) Shared Network Port May Lose Connection When a ProLiant Server with an HP NC370i or NC373i Multifunction Gigabit Network Adapter Running Microsoft Windows Server 2003 Enters Hibernation

Advisory: Integrated Lights-Out 2 (iLO 2) USB Hard Drive May Fail to Mount as a Virtual Device in Integrated Remote Console

Advisory: Integrated Lights-Out 2 (iLO 2) Virtual Media Cannot Access a USB Flash Drive from a Client Running Microsoft Windows Vista

Advisory: Integrated Lights-Out 2 (iLO 2) Virtual Media CD/DVD-ROM Drive May Not Be Available After Replacing the Physical Media in the CD/DVD-ROM Drive While the Virtual Media is Connected

Advisory: Integrated Lights-Out 2 (iLO 2) Web Interface May Not Open When Accessed Through a Check Point Secure VPN

Advisory: Integrated Lights-Out 2 (iLO 2) Web Interface May Stop Responding After an Extended Period of Time When Idle Connection Timeout is Set to "Infinite"

Advisory: Integrated Lights-Out 2 (iLO 2) WiLODbg Utility Version 1.1 May Not Function with Debugging Tools for Windows Version 6.9.3.113

Advisory: Integrated Lights-Out 2 (iLO 2) with Firmware Version 1.26 (or Earlier) on HP ProLiant c-Class Server Blades Loses Communication with Onboard Administrator When the Destination Port is 0

Advisory: Integrated Lights-Out 2 (iLO 2) With Firmware Version 1.29 (or later) Cannot be Downgraded Directly to Firmware Version 1.20 (or earlier)

Advisory: Integrated Lights-Out/Lights-Out 2 (iLO/iLO2) - Connection to a Remote Server With iLO/iLO2 Using Internet Explorer 8 May Cause Internet Explorer 8 to Stop Responding

Advisory: Invalid IPL Entry May Appear in HP ProLiant ROM-Based Setup Utility (RBSU) for Embedded Network Adapter After PXE Is Disabled on an HP NC510x Gigabit Server Adapter or HP NC512m Mezzanine Adapter

Advisory: iSCSI Boot or Accelerated iSCSI Connection Stops Responding During Reboot of Red Hat Enterprise Linux 5 on ProLiant Server

Advisory: Items at the Bottom of the Screen May Not Be Visible When Using Insight Diagnostics Online Edition for Linux on ProLiant Servers

Advisory: Items in Custom Firmware List in HP Systems Insight Manager 5.0 (or Earlier) Disappear Following Data Collection on ProLiant Servers

Advisory: Japanese Characters Entered Into the System Management Homepage (SMH) May Result In An Incorrect Display of Values When Using HP Insight Management WBEM Providers For Windows Server 2003/2008 Running On a ProLiant Server

Advisory: KERNEL UPGRADE RECOMMENDED to Prevent MCE or Unresponsiveness on ProLiant Servers Running Red Hat Enterprise Linux 4 (AMD64/EM64T) Using Dual-Core Intel Xeon Processor 5100 or 5200 Series or Quad-Core Intel Xeon Processor 5300 or 5400 Series

Advisory: LDAP Users Entering an Unqualified Username with Search Contexts Enabled Have No Permissions After Authenticating to HP BladeSystem c-Class Onboard Administrator

Advisory: Lightweight Directory Access Protocol (LDAP) Users Cannot Authenticate to HP BladeSystem c-Class Onboard Administrator When Configured for Novell eDirectory or NDS Servers

Advisory: Linux - HP ProLiant Server running HP OpenIPMI Device Driver for Linux May Log a Communication Error Message After the Server Has Been Idle for an Extended Period of Time

Advisory: Linux Command snmpwalk Returns Invalid "INTEGER: 18" Fan Value on HP BladeSystem c-Class Server Blades

Advisory: Linux Kernel Panic May Occur During Shutdown on HP ProLiant Server Running cciss Driver Version 2.6.16-6 Under Red Hat Enterprise Linux 4 Update 4

Advisory: Loading HP Insight Diagnostics Offline Edition Version 7.4.0 from the SmartStart Release 7.40 CD on a ProLiant Server May Unexpectedly Stop with `Connection Refused` Message

Advisory: Locally Administered Address (LAA) in Microsoft Windows 2003 Server Is Not Retained After a Port Is Enabled/Disabled or the ProLiant c-Class BladeSystem Server Is Powered Down

Advisory: Lock Icons May Display Inconsistently in HP Array Configuration Utility (ACU) Configuration View on ProLiant Servers Running Linux

Advisory: Log File (cma.log) Fills with "dwPortState=6" Messages on ProLiant Servers Configured with a Fibre Channel Adapter and Running HP Management Agents Version 8.00 Under Red Hat Enterprise Linux, SUSE Linux Enterprise Server, or VMware ESX Server

Advisory: Log Files in Web Based Enterprise Services (WEBES) May Grow Too Large

Advisory: Logical Management Port for the HP NC512m Adapter Configured in HP c-Class BladeSystem ProLiant Server Blade is Listed on the Initial Program Load (IPL) Screen in RBSU as "Other Network Controller" if PXE Is Enabled

Advisory: MAC Address Information for Embedded Network Interface Controllers (NICs) May Be Displayed in HP Onboard Administrator as "Unknown" if the Server Blade Is Not Allowed to Complete Power-On Self-Test (POST)

Advisory: Man Pages for NIC Agents (cmanicd) Will Not Be Available After the Installation of HP Insight Manager Agents Version 8.0.0 on VMware ESX Server 3.x

Advisory: Managed Systems May Be Displayed as "Not OK to Run" by Insight Power Manager (IPM) After HP Systems Insight Manager (HP SIM) Performs Initial Discovery and Identification

Advisory: Manual Migration of HP Server Migration Pack (SMP) or Physical to ProLiant (P2P) Licenses to the HP Server Migration Pack-Universal 3.0 License Pool Will Not Be Successful Using the Manual Migration Utility in SMP Universal

Advisory: Message "could not open cdrom" May Be Displayed When Attempting to Access Integrated Lights-Out (iLO) Virtual Media from a Client Running Microsoft Windows Vista

Advisory: Microsoft TCP Chimney Offload Feature Does Not Offload TCP Connection if ProLiant Essentials Intelligent Networking Pack (INP) Virus Throttle Feature is Installed

Advisory: Microsoft Windows Server 2003 Active Directory Editor May Display the Error Message "Error Saving DS Info: 0x80072024" When Using HP Directories Support for Management Processors Software on a ProLiant Server

Advisory: Microsoft Windows Server 2003 Device Manager May Report Resource Conflicts on Certain ProLiant Servers after Changing Serial Port Settings in the System ROM

Advisory: Modify Configuration Task Will Not Complete when ProLiant Essentials Rapid Deployment Pack (RDP) - Windows Edition 3.10 is Used on a Target Server Running VMware ESX Server 3.0

Advisory: Mouse Pointer May Move Erratically When a DOS Window Is Open and Active on an HP ProLiant Server Equipped with the ATI ES1000 Video Controller and Running Microsoft Windows 2000 Server

Advisory: Multiple Threshold Events for Processors and Disk Usage Logged Every Five Minutes Without State Change Under Insight Management WBEM Providers Version 2.2.0.0

Advisory: Native VLAN Configuration Is Mismatched After Updating the Virtual Connect Firmware Version 1.15 to Versions 1.16 Through 1.20 or After Restoring the Configuration Using Virtual Connect Manager Using Version 1.15 Through Version 1.20

Advisory: NC326m and NC374m Gigabit Server Adapters for HP c-Class BladeSystem Do Not Initially Include PXE Support

Advisory: NC373i Integrated Multifunction Gigabit Server Adapter - NC-Series Broadcom Online Firmware Upgrade Utility for Windows Server 2003/2008 v2.1.5.1 Displays "Configuration Error Has Occurred On One or More Adapters, Firmware Will Not Be Updated"

Advisory: NC-Series Gigabit Server Adapters - VLAN Communication Stops Responding on Windows Server 2008 Networks for All VLANs on the System Even Though Only One VLAN Is Disabled

Advisory: NC-Series NetXen Driver for Linux (nx_nic) Is Not Associated with Network Interface Adapter(s) As Expected After Base Distribution Installation of Certain Versions of Linux and modprobe Messages Regarding Blacklist Directive Are Displayed

Advisory: NetWare 6.5 SP5 ACPI Power Management Features Do Not Function as Expected on HP ProLiant Servers Based on Intel Dual-Core Xeon 5100 Series Processors

Advisory: NetWare ABENDs on HP ProLiant Servers with Embedded System Health Are Not Logged to the Integrated Management Log and Traps Are Not Sent to HP Systems Insight Manager

Advisory: NetWare Storage Agent May Become Unresponsive When HPQCISS.HAM Is Unloaded and Reloaded with the "\SLOT" Option on an HP ProLiant Server Configured with Two or More HP Smart Array SAS/SATA Controllers

Advisory: Network Configuration May Be Required After Standard Operating System Image of Certain Existing Similar Servers with Multiple Embedded HP NC373i Multifunction Gigabit/HP NC373m Multifunction Gigabit Network Adapters

Advisory: Network Configuration Utility - After VLAN 1 Has Been Disabled Through the Local Area Connection Folder, the Network Configuration Utility May Stop Functioning

Advisory: Network Configuration Utility Version 8.55 (Or Earlier) Allows TCP/IP Offload Engine (TOE) Functionality to be Configured on Unsupported Network Teams Resulting in Possible Loss of Network Connectivity or Inability to Establish a Connection

Advisory: Network Connectivity Traps Are Not Generated for a Network Configured for Service Console (ex - eth1) in VMware ESX Server 2.5.5 with HP Insight Management Agents 7.8.0

Advisory: Network Controller Driver Ethernet CD Version 9.40 - Message, "Diagnostics Terminated Prematurely" May Be Displayed While Attempting to Execute Diagnostics From Within the Network Configuration Utility

Advisory: Network Interface Controllers May Be Displayed in Device Manager with an Exclamation Point (Yellow Bang) if a Virtual to Virtual (V2V) Migration Between VMware Environments Has Been Performed Using Server Migration Pack (SMP)- Universal 3.5

Advisory: Network Performance Not As Expected on ProLiant Server Running Linux During Heavy User Datagram Protocol (UDP) Traffic

Advisory: Network Speeds Returned by ethtool Versions Prior to Version 6 Are Prefixed by "Unknown!" for Network Speeds Greater Than 1 Gbps

Advisory: NetXen Management Interface Listed as "Other Network Controller" in PCI Devices List (RBSU), "NetXen Management Interface" (Windows) and "XG Mgmt" (Linux) When HP NC512m Adapter for ProLiant c-Class BladeSystem Is Configured in the Server Blade

Advisory: Normal Server Shutdown Events May Be Captured by Integrated Lights-Out 2 (iLO 2) and Recorded as Fault Buffers on ProLiant Servers with Boot/Fault Console Capture Enabled

Advisory: Novell NetWare 6.5 SP7 or SP8 - Network Card Using the HP NC-Series Intel N1E Driver for NetWare May Not Respond On ProLiant Servers Running Novell NetWare 6.5 SP 7 or SP 8 When the ACPIDRV.PSM Is Loaded

Advisory: NXUDIAG Utility Reports "Link Test: Success" Even When a Link Does Not Exist on an HP NC512m Dual Port 10GbE Multifunction BL c-Class Adapter

Advisory: Onboard Administrator (OA) Firmware Sync Feature Does Not Update the Firmware Via the Insight Display Option if One of the OA Modules is Running Firmware Version 2.10

Advisory: Onboard Administrator (OA) Firmware Version 2.12 (or Earlier) - Virtual Connect (VC) Domain Will Be Lost and All LAN/SAN Communication Will Disconnect After Running the OA CLI Command "Update Device All" or "Update Device Icbays 1-8"

Advisory: Onboard Administrator and Virtual Connect Manager - The Link in the Onboard Administrator GUI May Not Always Point to the Active Virtual Connect Module

Advisory: Online Array Configuration Utility for Linux May Stop Responding and the Configuration Webpage Will Time Out on ProLiant c-Class Server Blades Configured with the Qlogic QMH2462 FC HBA and Running Red Hat Enterprise Linux 5

Advisory: Online ROM Flash Component for Linux - Will Erroneously Return a "Failed" Status Instead of "Software Already Up To Date" when Attempting to Update the System ROM on a ProLiant Server That Already Has the Latest Version of System ROM

Advisory: Online ROM Flash Components for Some ProLiant Servers and ProLiant xw460c Blade Workstations Running on a Windows XP, Windows Server 2003, or Windows Server 2008 Operating System May Not Function If the System Admin Password Is Set in RBSU

Advisory: Option ROM Configuration for Arrays (ORCA) Utility Does Not Display Properly When Accessed through Integrated Lights-Out 2 ( iLO 2) Remote Serial Console

Advisory: Performance Management Pack (PMP) Version 5.0 - Web Pages Will Be Inaccessible When HP Systems Insight Manager (HP SIM) Default Port 50000 Is Changed to a Different Port

Advisory: Performance Tab on the System Page of an HP Systems Insight Manager Central Management Server May Not Display Performance Management Pack Links

Advisory: Periodic Server Polling by Insight Power Manager (IPM) May Result in the Message, "Unlicensed iLO" if the Integrated Lights-Out on the Polled Server Does Not Have a License

Advisory: Power Button LED in Front Panel of ProLiant BL460c and ProLiant BL480c Server Blades May Remain Illuminated Green when System is in Standby Mode with some Video Monitors Connected to the Local I/O Cable

Advisory: Power Management Controller (PMC) - The Online PMC Firmware 3.4 (B) Upgrade Will Not Install on Supported ProLiant G5 and G6-Server Series and BladeSystem c-Class Server Blades When Running VMware ESX 3.5 or ESX 4.0

Advisory: Power Supplies in HP BladeSystem c3000 Enclosure May Temporarily Exceed the Maximum Output Rating in Rare Scenario

Advisory: Power Supply Status Test on ProLiant Servers May Erroneously Fail in HP Insight Diagnostics 7.70 Offline Version When Run from the SmartStart 7.70 CD

Advisory: Prefailure Alert Event Handling Tasks Triggered During "Prefailure Alert" Handling Status Are Set to "Completed" Immediately After Triggering the Event Action If the Host Is Not Included in the VMware DRS Cluster

Advisory: Previous Version Information May Not Be Displayed When Upgrading to Remote Monitor Service Version 5.20.0.0 Through HP Smart Update Manager

Advisory: ProLiant and Integrity Servers: Certain SAS Hard Disk Drives - FIRMWARE UPGRADE REQUIRED to Ensure That A Rare Drive Write Cache Issue Does Not Occur

Advisory: ProLiant BL p-Class or ProLiant BL c-Class Server Blade Information Cannot Be Accessed Via the HP System Management Homepage in HP Systems Insight Manager Through the Graphical Rack Display

Advisory: ProLiant BL35p Blade Servers with Internal 4 Port SAS HBA with RAID May Encounter Incomplete Windows Server 2003 Installation Using RDP Version 2.20 or Earlier

Advisory: ProLiant BL460c/xw460c G6 Server Blade - HP Onboard Administrator Does Not Display HP Part Number Information for ProLiant BL460c G6 Server Blades Running Certain Versions of the System ROM

Advisory: ProLiant c-Class BladeSystem Host Bus Adapter (HBA) Connections Will Be Remapped and May Force Server Blade HBA Port Offline if the Number of HP 4 GB Virtual Connect Fibre Channel Module Uplink Ports Are Changed When Accessing Remote Storage

Advisory: ProLiant C-class Server Blades Running Red Hat Enterprise Linux and Configured to Use DHCP May Experience a Timeout When Initializing the Link Between the Network Controller and the HP 1 Gb Ethernet Pass-Thru Module

Advisory: ProLiant Essentials Performance Management Pack 4.1 Online Analysis Page Will Not Load on a ProLiant Server Configured with Multiple NICs if the HP SIM CMS and PMP are Hosted on an IP Address Belonging to the Non-Primary NIC

Advisory: ProLiant Essentials Server Migration Pack - Physical to ProLiant Edition Migration Fails with the Error Message "javax.net.ssl.SSLException: Connection has been shutdown" if Duplex Settings are Incorrectly Configured

Advisory: ProLiant Essentials Server Migration Pack-Physical to ProLiant Edition (SMP-P2P) Version 1.x Does Not Migrate NIC Teaming Configuration from the Source Server to the Destination Server

Advisory: ProLiant Essentials Virtual Machine Manager (VMM) Displays Incorrect VMM Warning Message on FireFox Browser for ActiveX Controls

Advisory: ProLiant Essentials Vulnerability and Patch Management Pack (VPM) - A Systems Insight Manager 5.3 (HP SIM) and VPM Operating System Version Mismatch Is Discovered on ProLiant Servers and ProLiant Workstations Using SNMP on Windows

Advisory: ProLiant Server - Unable to Boot to SUSE Linux Enterprise Server 9 After Upgrading From Service Pack 3 to Service Pack 4 When an HP ProLiant Support Pack (PSP) or HP Storage Controller Driver RPM is Installed Prior to the Update

Advisory: ProLiant Server Configured with DVD-ROM Drive and Running VMware ESX Server 3.0.x Will Exhibit Very Slow DVD/CD Read Performance When Copying Files from the DVD-ROM Drive to a Virtual Machine Local Folder

Advisory: ProLiant Server Running HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2003/2008 Version 6.10.4.x (or earlier) May Stop Responding During Heavy I/O

Advisory: ProLiant Servers - "PCI: BIOS Bug: MCFG Area Is Not E820-Reserved" and "PCI: Not using MMCONFIG" Messages Appear Under SUSE Linux Enterprise Server 10 SP2

Advisory: ProLiant Servers - "WMI: Not Found" Message Appears When Running WBEM Providers for Windows Version 2.4.0.0 and Performing a WMI CIM Studio Query on Certain Tape Provider Classes

Advisory: ProLiant Servers - HP NC-Series Broadcom 10GbE Multifunction Server Adapters May Not Respond to a Wake-On-LAN (WOL) Event When Windows Server 2008 Enters Hibernation

Advisory: ProLiant Servers - HP Storage Controller Driver Installation May Not Complete If the Running Kernel Does Not Match the Grub Boot Loader Default Kernel Entry

Advisory: ProLiant Servers - Installing ProLiant Support Pack for Linux Version 8.15 Will Remove the ProLiant Channel Interface Device Driver for iLO / iLO 2, Causing Lights-Out Online Configuration Utility Not to Install and Loss of Other Functionality

Advisory: ProLiant Servers - Systems Running Linux and Configured with the HP SNMP Agents May Send Trap Mail Even if Trapmail is Commented Out From cma.conf

Advisory: ProLiant Servers - Upgrading from Windows Server 2008 SP2 to Windows Server 2008 R2 May Cause Information to be Missing on the System Management Homepage When Running Insight Management Agents Version 8.26

Advisory: ProLiant Servers - Virtual Bus Driver (VBD) Version May Not Be Correctly Displayed in Device Manager on Servers Using NC-Series Multifunction 1 Gigabit or 10 Gigabit NICs Even Though The Driver Has Been Updated

Advisory: ProLiant Servers - Windows Network Control Panel Does Not Update the Status of the NIC Team if the Network Cable is Disconnected and then Reconnected

Advisory: ProLiant Servers May Stop Responding During POST after Upgrading the Smart Array E200 Controller or Smart Array E200i Controller to Firmware Version 1.62

Advisory: ProLiant Servers Running Microsoft Windows Server 2003 and HP Insight Management Agents Do Not Report SNMP Trap Destination Changes When the Trap Destination Is Modified by Domain Policy

Advisory: ProLiant Servers Running NetWare 6.5 - CUSTOMER ACTION REQUIRED to Avoid Potential Loss of Data Contained in Pools and Volumes When CPQSHD or SCSIHD Is Unloaded While Both Modules Are Running

Advisory: ProLiant Servers Running Red Hat Enterprise Linux 3 with Logical Drives Greater than 1 TB will Incorrectly Report the Size of the Logical Drive as a Negative Value in /proc/partitions

Advisory: ProLiant Servers Running Sun Solaris 10 (08/07) Will Generate Warning Messages on Some Package Installations during a Local Zone Creation

Advisory: ProLiant Servers -Windows Server 2008 May Intermittently Stop Responding While Rebooting to Certain HP Smart Array Controllers

Advisory: ProLiant Servers with ILO 2 Running Red Hat Enterprise Linux 5 (AMD64/EM64T) May Intermittently ASR when a Certain System Health Application and Insight Management Agents and the OpenIPMI Device Driver Version is Installed

Advisory: ProLiant Servers With Integrated Lights-Out 2 (iLO 2) Integrated Remote Console Will Not Boot to The Bootable ISO CD-ROM Image When the Read Only Attribute is Set

Advisory: ProLiant Servers With Processors that Only Support One Power State Will Always Boot into "OS Control Mode" Regardless of Changes Made in ROM-Based Setup Utility or Integrated Lights-Out

Advisory: ProLiant Servers: SATA Hard Drives - Re-Flashing the Firmware on Certain SATA Hard Drives May Not Succeed

Advisory: ProLiant Servers: Smart Array Controllers - Linux Driver Diskettes for Smart Array Controllers on the SmartStart Release 8.30 CD Should Not Be Used

Advisory: Rapid Deployment Pack (RDP) - Windows Edition 2.20 Scripted Installation Jobs for Microsoft Windows 2000 Server and Microsoft Windows Server 2003 Will Fail to Complete after Upgrading to Rapid Deployment Pack - Windows Edition 3.00

Advisory: Reboot May Be Requested After Installing or Upgrading the HP NC510C/NC510F PCIe 10 Gigabit Server Adapter Driver or HP NC512m Dual Port 10GbE Multifunction BL-c Adapter Driver on an HP ProLiant Server Running Microsoft Windows Server 2003

Advisory: Reboot Required to Avoid Blue Screen on Any ProLiant Server Running Microsoft Windows 2003 (any Edition) Upgrading the Firmware for HP NC512m Dual Port 10GbE Multifunction BL-c Adapter

Advisory: Rebuilding and Deploying HP OpenIPMI Device Driver for Red Hat Enterprise Linux 4 (AMD64/EM64T) on ProLiant Servers Will Result in OpenIPMI Messages Displayed on Screen and in Log File

Advisory: Receive Side Scaling (RSS) and TCP/IP Offload Engine (TOE) Functionality Cannot be Re-enabled on a Network Team of NC-Series Multifunction Gigabit Server Adapters and RSS/TOE is Shown as Disabled in the Network Configuration Utility

Advisory: Reconnection Does Not Occur on iSCSI Targets Attached to an Ethernet Switch with Spanning Tree Protocol (STP) Enabled After Rebooting Client Server Configured with an HP NC-Series Multifunction Gigabit Server Adapter

Advisory: Recovery "Linux" Boot Entry Not Available on ProLiant Servers After Installing HP RAID Controller Driver RPMs for SUSE Linux Enterprise Server 10

Advisory: Red Hat Enterprise Linux 5 (x86) May Not Detect All Installed Memory During Installation on a ProLiant Server Configured with More Than 4 GB of Memory If the Base Server Installation Number is Used

Advisory: Red Hat Enterprise Linux 5 Does Not Mount HP Integrated Lights-Out (iLO) or iLO 2 Virtual Media Devices

Advisory: Remote Mouse is Unresponsive During Linux-Based Operating System Installation Using the Integrated Lights-Out 2 (iLO 2) Remote Console

Advisory: Remotely Installing Network Drivers on ProLiant Servers Running Windows Server 2003 or Windows Server 2008 Systems May Cause HP Smart Update Manager to Stop Responding

Advisory: Replacing an HP BladeSystem c-Class Virtual Connect (VC) Module May Cause a "NO COMM" State to Report on the New Module When Using an Enclosure Bay IP Address (EBIPA)

Advisory: Replicating the Management Agent Configuration to `Accept SNMP Packets from any Hosts` in HP Systems Insight Manager to Multiple Target ProLiant Servers Will Not Function

Advisory: ROTATELOGS.EXE Command Prompt Windows May Appear on ProLiant Servers Running Microsoft Windows Server 2003 or Microsoft Windows 2000 Server if the HP System Management Homepage is Allowed to Interact with the Desktop

Advisory: Running "Configure or Repair Agents" (CRA) in HP Insight Manager (HP SIM) 5.1 on an "Unknown" HP ProLiant Target Server May Fail with "Error When Trying to Establish SSH Connection"

Advisory: Running Integrated Lights-Out 2 (iLO 2) Online ROM Flash Component for Linux From an iLO 2 Virtual Serial Port (VSP) Connection May Cause VSP to Stop Responding

Advisory: Running System Management Homepage Commands from the Linux Command Line Does Not Allow the Security Log File Rotation Size to be Changed

Advisory: Scheduled Tasks Created Before March 11, 2007 for the U.S. Central Time Zone in HP Systems Insight Manager (HP SIM) 5.1 Must Be Modified After the Daylight Saving Time Update or the Tasks May Run an Hour Later Than Expected

Advisory: Serial Port Information May Not Be Displayed On the System Management Homepage (SMH) When Using HP Insight Management WBEM Providers for Windows Server 2003/2008 Version 2.1.0.0 On a ProLiant Server

Advisory: Server Migration Pack - After a ProLiant to ProLiant (P2P) Migration Using SMP 3.5 or 3.6, the Destination Server May Boot with an Invalid IP Address

Advisory: Server Migration Pack - Keyboard Layout Changes to English after an SMP ProLiant to ProLiant (P2P) or Virtual to ProLiant (V2P) Migration

Advisory: Server Migration Pack - The HP SIM Rediscovery Task Is Not Triggered After the Migration Is Complete If a ProLiant to Virtual (P2V) SMP Migration Is Launched from HP Systems Insight Manager (HP SIM)

Advisory: Server Migration Pack (SMP) - Physical to Virtual (P2V) Migration of ProLiant Server to a Destination VMware ESX 2.x Host Using SMP 3.7 (or Earlier) May Fail with a "VMware ESX Server Internal Monitor Error" Message

Advisory: Server Migration Pack (SMP) 3.7 - During SMP 3.7 Virtual to Virtual (V2V) or ProLiant to Virtual (P2V) Migration to Citrix or VMware ESX Server, Auto Boot of Destination Virtual Machine Fails with a "Could Not Power-Up the VM" Error Message

Advisory: Server Migration Pack (SMP) 3.70 (or Earlier) - ProLiant Boot CD May Fail to Detect the Storage Controller on a Destination Server

Advisory: Server Migration Pack (SMP) Universal Edition 3.0 or 3.5 ProLiant to Virtual (P2V) or Virtual to Virtual (V2V) Migration May Fail with a "Null Pointer Exception" Error if the Source Drive is 1 Terabyte (1 TB) or Larger in Size

Advisory: Server Migration Pack (SMP) Universal Edition 3.50 May Not Respond After a Server Migration When the Network Is Disconnected From the Destination ProLiant Server

Advisory: Server Migration Pack (SMP) Universal Editions 3.0 and 3.50 May Display Two Raw Partitions In the Migration Wizard On a ProLiant Source Server

Advisory: Server Migration Pack (SMP) Version 3.5 Or 3.6 - Virtual to ProLiant (V2P) Or Physical to ProLiant (P2P) Migration May Result In a Blue Screen On a Destination Server Connected to the Storage Area Network (SAN)

Advisory: Server Migration Pack (SMP) Version 3.6 (Or Earlier) - Server Migration May Be Unsuccessful And Display the Error Message "The File System on Source Disk \\.\PhysicalDrive0, Partition 0 Could Not Be Resized During the Migration"

Advisory: Server Migration Pack (SMP) Version 3.7 (Or Earlier) - Migrations May Be Unsuccessful And Display the Error "Drivers Could Not Be Injected Into Boot Disk" On a ProLiant Server Running Windows Server 2000/2003/2008

Advisory: Server Migration Pack (SMP) Version 3.7 (Or Earlier) - Mouse and Keyboard May Not Function On a Destination ProLiant c-Class Server Blade When the Source Server Is Running Windows Server 2000, Windows Server 2003 or Windows Server 2008

Advisory: Server Migration Pack 3.5 or 3.6 - When SMP is launched from HP Systems Insight Manager, If SMP Licenses Are Unavailable, the User Will Not Be Able to Progress to the Next Screen if the Migration Type is Changed

Advisory: Server Migration Pack 3.6 (Or Later)- After a P2P or V2P Migration, the Application Station May Fail to Connect to the Destination Server After an Auto-Boot of the Destination Server Via Integrated Lights-Out (iLO)

Advisory: Server Migration Pack 3.70 - CUSTOMER ACTION REQUIRED for VMware ESXi 4.0/VMware ESX 4.0 (vSphere) P2V or V2V Migrations to Complete Successfully Using Server Migration Pack 3.70

Advisory: Server Migration Pack- If an SMP Migration Is Improperly Cancelled, the Virtual Media Remains Connected to the Destination Integrated Lights-Out (iLO)

Advisory: Server Migration Pack-Universal 3.5 Migration Wizard Displays a Larger Disk Size in Step 7 of a ProLiant to Virtual/Virtual to Virtual ( P2V/V2V) Migration to VMware ESX Server Hosts Than Is Actually Available for Creating a Virtual Machine

Advisory: Server Migration Pack-Universal Edition 3.5 Displays "No Valid License Found" Message When Performing an SMP-Universal Migration with the Last Available License

Advisory: Setting HP Virtual Connect (VC) Domain Names Greater than 32 Characters Causes Virtual Connect Domain Name Validation to Timeout on HP BladeSystem c-Class Configurations

Advisory: SHUTDOWN PROCEDURE REQUIRED for ProLiant Server Running Sun Solaris 10 to Properly Flush Cache on Smart Array Controller Prior to Shutdown and Prevent "POST Error: 1792 - Drive Array Reports Valid Data Found in Array Accelerator" Message

Advisory: Simple Network Management Protocol (SNMP) Daemon (snmpd) May Stop Responding When Servicing Requests from HP Insight Management Agents (HPQhma) for Solaris 10 and the HP System Management Homepage Will Not Display any ProLiant Server Information

Advisory: SLES 11- "i686 No Such File or Directory" Message Will Be Displayed if An Attempt Is Made to Manually Install the hpmouse Driver on ProLiant Servers Running SLES 11

Advisory: Slot Information May Be Incorrectly Displayed or May Be Missing on ProLiant Servers Running HP Insight Online or Offline Diagnostics Version 7.9.1

Advisory: Slow Keyboard Response During Integrated Lights-Out 2 (iLO 2) Remote Console Session on ProLiant Servers Running Linux

Advisory: Small Memory Leak May Intermittently Occur in Certain Versions of Integrated Lights-Out Agent (cmasm2d) for Linux

Advisory: SmartStart 8.10 and 8.15 - Installation of SmartStart May Be Unable to Proceed in Some Fibre Channel Configurations

Advisory: SmartStart- An "Invalid Entry" Message Will Be Displayed During a SmartStart 8.10 Assisted Installation of Windows Server 2008 if the "Without Hyper-V Media" Option is Chosen and the Operating System Cannot Be Installed

Advisory: SmartStart Release 7.60, Firmware Maintenance CD 7.60, or Physical to ProLiant CD Version 1.1 May Stop Responding During System Startup if More Than One Option Card is Installed in the Server

Advisory: SmartStart Release 8.0.0 Assisted Installation May Not Activate Pre-Installed Windows Server 2008 x64 Editions On HP ProLiant Servers

Advisory: SmartStart Scripting Toolkit Reboot Utility May Not Respond Or May Display a Segmentation Fault Error On a ProLiant Server Running SUSE LINUX Enterprise Server 10 Service Pack 1 (SP1)

Advisory: SMHSTART.EXE File is not Removed on ProLiant Servers Running Microsoft Windows Server 2003 Web Edition After Uninstalling or Upgrading HP System Management Homepage (SMH)

Advisory: Some HP BladeSystem c7000 Enclosure "cpqRackEnclosureFanDegraded" Traps May Be Invalid

Advisory: Some HP BladeSystem ProLiant or Integrity Server Blades May Not Power On When the Dynamic Power Savings Mode Is Enabled in HP Onboard Administrator Version 2.20 (or Earlier)

Advisory: Some VMware ESX Server 3.0.x Patch Updates May Delete VMM Settings in the Firewall and Break Communication Between the VMM Server (HP SIM Server) and the VMM Agent (ESX Host)

Advisory: Spare Drives May Not Be Displayed In the System Management Homepage (SMH) When Using HP Insight Management WBEM Providers For Windows Server 2003/2008 Version 2.1.0.0 On a ProLiant Server

Advisory: Stack Overflow Error Message May Be Displayed During a Virtual Connect (VC) Firmware Update When Using the Virtual Connect Manager(VCM) User Interface (UI) On a BladeSystem c-Class Enclosure

Advisory: STOP 0x0000008E: or STOP 0x0000001E : KERNEL_MODE_EXCEPTION_NOT_HANDLED Message Displayed on a ProLiant Server with a Very Fast Processor with a Large L3 Cache Running Microsoft Windows Server 2003 (Any Edition) or Microsoft Windows 2000 Server

Advisory: Storage Controller May Appear as a Generic "RAID Controller" in Microsoft Windows Device Manager After a ProLiant Essentials Server Migration Pack-Physical to ProLiant (P2P) Migration

Advisory: Sun Solaris - Unpack 64-bit Miniroot of Solaris 10 10/09 When Adding HP Drivers to Avoid "No Driver Bind" and "No Disks Found" Messages

Advisory: Sun Solaris - "Add_drv/Rem_drv Currently Busy; Try Later" Message Displayed When Modifying the Miniroot to Add Drivers for SUN Solaris 10 5/09

Advisory: Sun Solaris - Sun Solaris 10 5/09 Will Go Into Maintenance Mode, May Not Display LUNs, or Will Panic and Reboot With Emulex/Qlogic FC HBAs When Enabling I/O Multipathing Using stmsboot Command on HP ProLiant Servers

Advisory: SUSE Linux Enterprise Server 10 - HP NC-Series Intel e1000e Driver for Linux Does Not Automatically Associate With the PCIe NIC on ProLiant Servers Running SUSE Linux Enterprise Server 10 SP1, SP2, or SP3

Advisory: SUSE Linux Enterprise Server 10 (AMD64/EM64T) Service Pack 1 Erroneously Displays Failed Service Message During Startup for HP ProLiant Channel Interface Device Driver for iLO / iLO 2 (hp-ilo) After Installing ProLiant Support Pack Version 8.10

Advisory: SUSE Linux Enterprise Server 11 - When Loading HP NC-Series Intel e1000e Driver or When Network Is Started, "FATAL: Module '/lib/modules/2.6.27.19-5-default/kernel/drivers/net/e1000e/e1000e.ko' Is Unsupported" Message Displayed

Advisory: SUSE Linux Enterprise Server 9 - NIC Information in System Management Homepage or Systems Insight Manager Is No Longer Available with HP SNMP Agents for SUSE Linux Enterprise Server 9 After Network Connection Change

Advisory: System Event Log May Display Warning Event IDs 56, 118, or 129 After Installing Microsoft Windows Server 2003 SP1 on a ProLiant Server Configured with Certain Smart Array Controllers Using the HpCISSs2 Driver

Advisory: System Management Homepage - A Login Failure May Occur When Kerberos Support Is Enabled on a SMH System and the Local Access to SMH is Tried Using the Localhost Address with Port 2381 Directly or When Using a Desktop Icon

Advisory: System Management Homepage - A Proxy Server Error Occurs When Accessing the Secure Path Manager Webapp Link Using System Management Homepage (SMH) Version 3.x

Advisory: System Management Homepage - An Error_log Reports Missing Files on System Management Homepage (SMH) 3.0.0 for Systems Configured with a Linux or Windows Operating System

Advisory: System Management Homepage (SMH) - "Fault Tolerance" Property on the Logical Drives Page Is Incorrectly Displayed as "Unknown" for RAID (1+0) Logical Drive Configurations That Exceed 1 TB

Advisory: System Management Homepage (SMH) - SMH May Not Be Displayed in the Browser if the IP Address Network Interface is Not Available When SMH Service Is Started

Advisory: System Management Homepage (SMH) - SMH Version 3.0.0 Through 3.0.2 Stops Responding When an Alternative Name Is Set with Mozilla Firefox 3.0

Advisory: System Management Homepage (SMH) 3.0.2 (Japanese Language): System Management Homepage Is Installed in English Instead of Japanese

Advisory: System Management Homepage for Linux Cannot Import Any HP Systems Insight Manager (HPSIM) Certificate when System Management Homepage (HPSMH) is Installed Before Installing HPSIM on the Same Linux Server

Advisory: System Management Homepage Version 3.0.1.73 - Online Help Feature May Not Return Search Results

Advisory: SYSTEM ROM UPDATE RECOMMENDED for Improved Memory Zone Cooling to Prevent Correctable or Uncorrectable Threshold Memory Errors From Being Reported in the Integrated Management Log (IML) of the ProLiant BL460c Server Blade

Advisory: SYSTEM ROM UPDATE RECOMMENDED: Mixed Stepping Processor Configurations May Cause a Linux Kernel Panic in Some ProLiant Servers

Advisory: SYSTEM ROM UPGRADE RECOMMENDED to Ensure Proper Support for all Fully Buffered DIMMs Installed in Certain ProLiant Servers

Advisory: SYSTEM ROM UPGRADE REQUIRED to Avoid a Windows Blue Screen on HP ProLiant Servers Containing Two Different Revisions of Intel Xeon 5200-Series or Intel Xeon 5400-Series Processors when Running Windows 2008 x64 with Certain System ROM Versions

Advisory: SYSTEM ROM UPGRADE REQUIRED to Prevent Unpredictable System Behavior in ProLiant Servers Configured with Certain Intel Processors

Advisory: Target Server May Fail to Connect to the Deployment Server on a Subsequent PXE Boot and May Enter a PXE Boot Loop When Using ProLiant Essentials Rapid Deployment Pack (RDP) Windows Edition 3.10

Advisory: The Option "Allow Shared Devices" Does Not Function When Upgrading Hard Drive Firmware Using the HP Firmware Maintenance CD Version 7.80 (or Earlier)

Advisory: Two Minute Delay May Occur After Reconfiguring HP NC51xx PCIe 10 Gigabit Server Adapter Under Version 3.4.114 of the NC51xx Driver on HP ProLiant Server Running Microsoft Windows Server 2003

Advisory: Ubuntu Linux Server - Configuration Required for IPMITOOL Management Utility to Function on any HP ProLiant Server With an Integrated Lights-Out 2 (iLO 2) and Running Ubuntu Linux 9.04 Server

Advisory: Unable to Configure Certain Components During the Deployment Process Using the ProLiant Support Pack for Microsoft Windows Server 2003 or Microsoft Windows Server 2003 x64 Editions Version 7.90 If the Regional Option Is Not English or Japanese

Advisory: Unable to Log Into HP Systems Insight Manager (HP SIM) After a System Reboot or if HP SIM Unexpectedly Loses Communication with the SQL Database

Advisory: Unable to Perform Graphical Installation of SUSE LINUX Enterprise Server 9 on ProLiant Servers

Advisory: Unexpected Network Outage May Occur During Manual HP BladeSystem c-Class Virtual Connect Firmware Update After Activating the Standby Module if the Primary Module is Not Immediately Activated

Advisory: Unexpected NIC Status May Be Reported by the Network Subsystem Agents due to the /etc/udev/rules.d/30-net_persistent_names.rules File after Adding or Replacing a NIC on a ProLiant Server Running SUSE Linux Enterprise Server 10

Advisory: Uninstallation of HP Version Control Agent (VCA) is not Possible if the HP System Management Homepage is not Installed on a ProLiant Server

Advisory: Upgrade to HP Systems Insight Manager (HP SIM) 5.1 May Fail with Error Message "Connection to the Repository Server Failed"

Advisory: USB Key Utility - Source Computing Devices Running Windows Server 2008 Server Core Operating System Will Receive the Error Message "oledlg.dll File Was Not Found Reinstalling the Application May Fix the Problem" When the Utility Is Launched

Advisory: Using HP Gigabit Ethernet NIC Teaming Driver (QASP.LAN) in a NetWare 6.5 Clustering Environment May Result in Discarded "Gratuitous ARP" Packet and Lost Communications After Cluster Resource Failover

Advisory: Using Rapid Deployment Pack - Windows Edition 2.20 the CD-ROM Drive Functionality is Lost After a Read Windows Image Job is Run on a VMware ESX 2.5.2 Virtual Machine that is Running Microsoft Windows Server 2003

Advisory: Using Rapid Deployment Pack Release 3.70, ProLiant BL20p G3 and ProLiant BL460c Server Blades Are Unable to Obtain an IP Address to Start a Red Hat Enterprise Linux 4 Update 5 Scripted Installation

Advisory: Using Rapid Deployment Pack to Simultaneously Install a Boot-from-SAN Configuration to Two Specific ProLiant Blade Servers Located in the Same Sleeve Will Cause the Installation to Halt

Advisory: Version Control Agent (VCA) 2.2.0 - VCA Homepage May Exclude Drivers And Software From the Installed Software and Driver List And Display a False Green/Good Software Status

Advisory: Version Control Agent (VCA) for Windows Software Fails to Upgrade when the ProLiant Support Pack (PSP) is Upgraded from Version 7.80 to Version 8.00

Advisory: Version Control Agent (VCA) May Incorrectly Report Inactive or Obsolete Software and Drivers That Are Not Actually Installed on ProLiant Servers, Causing Overall Status of VCA to Display as Yellow (Degraded)

Advisory: Version Control Agent (VCA) Status May Display as Yellow (Degraded) or Orange (Critical) for a ProLiant Server running Microsoft Windows 2000 Server

Advisory: Virtual Connect - Messages Will Be Displayed in the Virtual Connect UI and the Firmware Updates May Fail to Complete When Two or More Firmware Updates Are Started Within 60 Minutes of Each Other

Advisory: Virtual Connect Enterprise Manager (VCEM) - Editing an Assigned Server Profile Using VCEM 1.30 May Cause Inconsistencies When Removing and Adding FC Connections to Different Bays When the Changes are Done Simultaneously

Advisory: Virtual Connect Enterprise Manager (VCEM) Cannot Edit Imported Server Profile When Virtual Connect Fibre Channel Modules Are Inserted in the Upper Level Interconnect Bays After Adding a VC Domain to VC Domain Group

Advisory: Virtual Connect Enterprise Manager (VCEM) Version 1.0 or 1.1 Cannot Manage a VC Domain that Configures an Ethernet Uplink Port with a Speed/Duplex Value Set to "Disabled"

Advisory: Virtual Connect Manager - Virtual Connect Does Not Correctly Assign Virtual Connect MAC addresses to HP NC364m Quad Port 1GbE BL-c Adapters or NC360m Dual Port 1GbE BL-c Adapters on Some ProLiant and Integrity c-Class Server Blades

Advisory: Virtual Connect Manager (VCM) GUI May Display Inaccurate Progress Status When Downgrading Virtual Connect (VC) Firmware Version 1.30 Or 1.31 to an Earlier Firmware Version on a BladeSystem c-Class Enclosure

Advisory: Virtual Connect Manager (VCM) May Display Zero Percent In the Progress Indication Box When Uploading Firmware From a Firmware Update Package On a BladeSystem c-Class Enclosure

Advisory: Virtual Connect Manager (VCM) May Not Perform a Virtual Connect (VC) "Automated Firmware Update" When Firmware Version 1.3x is Re-Updated On a BladeSystem c-Class Enclosure

Advisory: Virtual Connect Manager (VCM) May Return an Empty Unit Identification (UUID) for Source and/or Target Servers After a Virtual Connect Enterprise Manager (VCEM) Profile Failover Has Been Initiated

Advisory: Virtual Connect Support Utility (VCSU) - VCSU Is Unable to Perform a Healthcheck or Firmware Flash if the User Does Not Have Administrator Rights to the Onboard Administrator Bays

Advisory: Virtual Machine Management Pack (VMM) - The VMM Patch Installation May Fail to Complete During the Upgrade Process When Using the Insight Software DVD To Upgrade the Integrated Installer from Version 3.0 to Version 3.10

Advisory: Virtual Machine Manager (VMM) 3.1 May Cause a "Live Move" Task to be Reflected as "In Progress" in HP Systems Insight Manager (HP SIM) Even Though VMM 3.1 has Already Completed the Task

Advisory: Virtual Machine Manager (VMM) 3.5 - Unable to Power on Virtual Machine (VM) When Raw Device Mapping (RDM) Is Over 1.2 TB and Is Managed by Virtual Machine Manager (VMM) 3.5 on VMware ESX Server 3.0.2 U1 or VMware ESX Server 3.5 U2

Advisory: Virtual Machines May Unexpectedly and Intermittently Power Off During VMware Consolidated Backups of Virtual Machines on ProLiant Servers Running VMware ESX Server 3.x

Advisory: Vmkload_mod PANIC Messages May Be Displayed During a Reboot or Shutdown of an HP ProLiant Server Configured with VMware ESX Server 3.5 When Virtual Machines are Running on the Server

Advisory: VMNIC Link Status LEDs Will Not Illuminate and the Integrated Management Log (IML) Viewer Will Not Be Populated with Notifications of Link Status in HP Systems Insight Manager (HP SIM) on VMware ESX Servers

Advisory: VMware Console May Display an Adapter Mismatch Pop-Up Message When Powering on a Virtual Machine After Performing a P2V/V2V Migration Using Server Migration Pack (SMP)-Universal 3.0 or 3.5

Advisory: VMware ESX 3.5 Update 1, 2, Or 3 - HP Systems Insight Manager (HP SIM) Version 5.2 Or Version 5.3 May Incorrectly Manage Data and Associations Between the Host Server and Virtual Guests

Advisory: VMware ESX 3.5 Update 3 or VMware ESXi 3.5 - Some HP BladeSystem Server Blades Do Not Complete the VMware VMotion Process That Use Integrated NC532i Dual Port Flex-10 10GbE Multifunction Server Adapters

Advisory: VMware ESX 4.0 - The System Management Homepage (SMH) Does Not Always Populate Management Processor Information When the Host System Is Running VMware ESX 4.0

Advisory: VMware ESX and vCenter 4.0 - When a Server Is Manually Placed Into Standby Mode in vCenter, Monitoring Is Not Turned Off on the Server in HP Systems Insight Manager (HP SIM)

Advisory: VMware ESX Server 2.5.4 Does Not Respond to Keyboard Input in the Integrated Remote Console When Accessed Using HP Integrated Lights-Out 2 (iLO2) Firmware Version 1.29

Advisory: VMware ESX Server 2.5.5 Fails to Install on a Mixed Stepping HP ProLiant Server if a Higher Stepping Processor is in the First Slot and a Lower Stepping Processor is in the Second Slot

Advisory: VMware ESX Server 3.0.0 or 3.0.1 May Temporarily Stop Responding When a Rescan of the Fibre Channel HBA is Initiated from the Virtual Infrastructure Client Console

Advisory: VMware ESX Server 3.0.1 May Stop Responding and Display a Purple Screen During an Add/Remove Disk Operation if a Delete I/O Operation Has Also Been Initiated at the Same Time

Advisory: VMware ESX Server 3.0.x Console Error Messages Appear After vmkfstools LUN Reset Test on an HP QLogic QMH2462 4Gb FC HBA for c-Class BladeSystem Mezzanine Card

Advisory: VMware ESX Server 3.x.x - One Terabyte of Storage Does Not Display Correctly When Viewing From HP System Management Homepage (SMH) or When Using a Remote Console While Running VMware ESX 3.x.x on ProLiant Servers

Advisory: VMware ESXi 3.5 U1-4 and ESXi 4.0 - The Onboard Administrator (OA) Does Not Display the OS Server Name as It Appears in iLO/iLO 2 When Running VMware ESXi 3.5 U1-4 or ESXi 4.0 Because There Are No Supported HP Management Providers

Advisory: VMware ESXi 3.5.0 Update 4 - The VMware ESXi CIM Provider Does Not Report the System UUID Correctly in the SMX_ComputerSystem.IdentifyingNumber Field and Does Not Match the UUID Returned by Integrated Lights-Out (iLO)

Advisory: VMware ESXi 3.50 Update 3 - Power Supply Reading Is Shown as Zero Watts in the VMware Virtual Infrastructure Client

Advisory: VMware ESXi 4.0 - After Upgrading VMware ESXi 4.0 From the HP ESXi 1.0 Offline Bundle to the HP ESXi 1.1 Offline Bundle, HP Systems Insight Manager (HP SIM) Does Not Report Information for the New Feature Sets for "Network" and "SA HBA"

Advisory: VMware ESXi Server - Processor Name is Not Displayed Correctly When Viewing Processor Temperature Using Virtual Infrastructure Client on ProLiant Servers Running VMware ESXi Server 3.5.0

Advisory: VMware Server 1.0.6 - HP Health Agents Do Not Start After Installing VMware Server 1.0.6 on Red Hat Enterprise Linux 4 Update 7 with the ProLiant Support Pack 8.20

Advisory: When Attempting an HP ProLiant Essentials Performance Management Pack (PMP) Version 4.3 Upgrade with HP SIM 5.1 and Microsoft SQL Server 2005, a "Setup Failed. Please Refer to C:\hppmp.log for Details" Message is Displayed

Advisory: When Integrated Lights-Out 2 (iLO 2) Console Replay is in Use, Multi User Remote Console (MURC) May Not Be Able to Administer Servers Through the Integrated Remote Console (IRC)

Advisory: When the Onboard Administrator Module Fails Over to the Standby Module, Intermittently SNMP Traps Will Not Be Produced

Advisory: When Updating ProLiant Servers Running Microsoft Windows Server 2003 Using the ProLiant Support Pack Version 7.70 (or Later) the "Disable Fibre Agent Tape Support" Option Will Inadvertently Become Unchecked During the Installation

Advisory: When Using HP Vulnerability and Patch Management (VPM) Version 2.0.3 (and Earlier) on Target Servers, Only Most Recent Patch Acquisitions Will Be Available

Advisory: When Using the Server Migration Pack (SMP) to Migrate a VMware ESX Server Virtual Machine (VM) in a Virtual Server to ProLiant (V2P) Operation, the Migration Fails When the VM "OS Type" Is Incorrectly Configured and Displays as "Other"

Advisory: Windows Essential Business Server 2008 (EBS) - Installation May Be Unsuccessful When the Administrator Password Contains a Quotation Mark (")

Advisory: Windows Server 2003/2008 - VLAN Will Disable/Disconnect When Configured on Non-Teamed Network After Enabling/Disabling the TCP/IP Offload Engine (TOE) Property on ProLiant Server Using Network Configuration Utility (NCU) Version 9.65

Advisory: Windows Server 2008 - HP Integrated Lights-Out (iLO) High Performance Mouse May Not Respond When Running In a Microsoft Hyper-V Virtual Machine

Advisory: Windows Server 2008 - IPv6 TCP Offload Engine (TOE) Functionality Cannot be Re-Enabled on NC382x and NC532x Network Server Adapters in the Network Configuration Utility

Advisory: Windows Smart Components - Components Shipped With the ProLiant Essentials Firmware Maintenance CD Version 8.30 and 8.40 and ProLiant Support Pack (PSP) Version 8.20 May Generate an Application Error Message

Advisory: Write Linux Image Job May Fail in RDP-Windows Edition 3.50 with "This Raw Volume Cannot be Restored to this Disk" Message on a ProLiant Target Server Deploying an Image with Root as an Extended Partition Instead of as Part of LVM

ALT Key May Appear Stuck in NetWare Debugger Screen When Accessed Using Integrated Lights-Out Remote Console

ALT, CTRL, or SHIFT Key May Appear Stuck During An Integrated Lights-Out (iLO) Remote Console Session

Altiris Deployment Server Component May Not Install And No Error Message Will Be Displayed During The Rapid Deployment Pack - Windows Edition 2.00 Autorun Utility Installation Process

Altiris eXpress Deployment Solution Simple Installation Method Does Not Detect An Existing Microsoft SQL Server Installation

An e100 Driver Upgrade Is Needed For A Red Hat Linux 8.0 Professional Installation Via Rapid Deployment Pack Release 1.30

An Extra Line May Be Displayed When Using The Integrated Lights-Out (iLO) Text Remote Console Feature On A ProLiant Server Running Linux

Applet Message May Be Displayed When Creating Or Deleting A Task In Insight Manager 7 SP2 Or SP2.1

Array Configuration Utility (ACU) Installation May Be Missing Web-Enabled Management Software Password

Array Configuration Utility (ACU) Version 6.40 May Display Internet Explorer Security Messages Using the Version of Microsoft Internet Explorer 6.0 Shipping With Microsoft Windows Server 2003

Array Configuration Utility 7.30 Scripting Mode Reports `Invalid RAID` Error when Attempting to Create a Configuration with RAID 1

Array Configuration Utility Is Not Installed During A Linux Scripted Installation Using The ProLiant Essentials Rapid Deployment Pack Release 1.40

Array Configuration Utility May Not Allow Logical Drive Extension to the Maximum Capacity Displayed if the Logical Drive Size is Greater than 261000 MB

Battery Backed Write Cache Enabler Option Kit May Contain A Cable With A Mislabeled Part Number

Blue Screen BugCheck Occurs Intermittently During System Boot Of Japanese Version Of Microsoft Windows 2000 Server

Blue Screen Occurs When Upgrading The Remote Insight Lights-Out II Board Driver For Windows 2000 Version 2.2.0.0

BugCheck Stop 0xD1 May Occur On ProLiant Servers In Emulex Storport Miniport Driver For SAN Storage Systems Running Microsoft Windows Server 2003

Cannot Create USB Device Images Using Integrated Lights-Out (iLO) Virtual Media Create Image Applet Tool on Linux Clients

Case Sensitive User/Login Names Not Currently Supported Using Integrated Lights-Out (iLO) ROM-Based Setup Utility (RBSU)

CD Installation of SUSE LINUX Enterprise Server 8 Using Integrated Lights-Out (iLO) Virtual CD-ROM May Not Complete Resulting In the Error `Please make sure that CD number 1 is in your drive!`

Certain HP KVM Server Console and IP Console Switches May Exhibit Flickering, Flashing or Blank Video

Certain HP Modular Power Distribution Units (mPDU) Power Strips May Not Power On Or Power Off Properly

Certain ProLiant BL p-Class GbE2 Interconnect Switches May Not Have The Correct Serial Number Embedded Into The EEPROM Memory

Certain ProLiant p-Class Server Blades May Blue Screen (Stop 0x7B) When Booting To Windows 2003 Installation CD Or Windows Preinstallation Environment (WinPE) CD

Certain ProLiant Servers with 64-Bit Enabled Processors May Intermittently ABEND During Startup of NetWare 6.5 SP3 When Loading CPQASM.NLM

Changing Speed/Duplex on Dual Switch-Assisted Load Balancing (Dual SLB) NIC Teams Causes Stop D1 Blue Screen in CPQTEAM.SYS

Cisco Gigabit Ethernet Switch Module (CGESM) For HP BladeSystem p-Class Server Blades Displays MAC Address Table Count As 8200 Instead Of 8192

Cisco Gigabit Ethernet Switch Module (CGESM) For HP BladeSystem p-Class Server Blades May Stop Responding If The Setup Program Is Left Unattended For A Long Period Of Time

Clearing All Thresholds from HP Management Agent Control Panel Applet May Not Clear Thresholds Under Performance on System Management Homepage

Compaq Insight Manager (Win32) Will Not Receive Storage Trap Alerts From Insight Management Agents Version 6.40

Compaq System Configuration Utility Falsely Reported As Installed Or Available Software By Insight Management Agents, Version Control Agent (VCA) , And Version Control Repository Manager (VCRM)

Component Packs Containing Two Drivers Do Not Display Both Drivers In Version Control Agent (VCA) Page

Computer Configuration Properties Window Defaults to Static IP Address Settings when the Managed Server Received IP Address Via DHCP with SUSE LINUX Enterprise Server 9 (x86/AMD64/EM64T)

Concurrent Directory Login Limit In Integrated Lights-Out (iLO)

Configuring Security Policies To Run OpenSSH In Microsoft Windows Server 2003 For Use With ProLiant Essentials Vulnerability And Patch Management Pack (VPM) Release 1.0

Connecting A Second Integrated Lights-Out (iLO) Virtual Media Applet May Interfere With The First Applet

CPQSETUP.LOG Does Not Record Windows Smart Component Installation Results If Components Are Installed Using An Account That Does Not Have Administrator Privileges

CPU Speed Information from /proc/cpuinfo is Incorrect with SUSE LINUX Enterprise Server 9 (x86) SP1 or SP2 when AMD PowerNow is Enabled

Cursor Moves Two Lines At A Time When Selecting A Command Prompt Boot Option In An Integrated-Lights Out (iLO) Remote Console Session

Custom Adlagent Configuration File Is Not Installed Properly During A Scripted Installation Of VMware ESX Server 2.5 By Rapid Deployment Pack - Windows Edition 2.00

CUSTOMER ACTION REQUIRED: Use HDDETECT Utility To Identify Certain Ultra320 Hard Drives Susceptible To An Unsuccessful Write Operation Occurring During Extreme Disk Intensive I/O Operations

CUSTOMER ATTENTION REQUIRED: Incorrectly Upgrading Insight Manager 7 To Insight Manager 7 SP2 In A Microsoft Cluster Server Configuration May Damage The IM7 Database

Customized System List May Display Incorrect (Older) Agent Versions on HP Systems Insight Manager Version 4.2 SP2

Data Execution Prevention (DEP) Feature In Windows Server 2003 SP1 RC1 Causes The HP Insight Management Agents And The HP ProLiant Rack Infrastructure Service To Stop Running

Deployment Server Console In Rapid Deployment Pack - Windows Edition 2.00 Displays A Connected Icon For A Managed VMware ESX Server Even When The Server Is Power-Cycled or Powered Down

Device Drivers May Not Load When Using The /3GB Switch On ProLiant Servers Running Microsoft Windows Server 2003

Diskette Media Errors May Cause Integrated Lights-Out (iLO) And Remote Insight Lights-Out Edition II (RILOE II) Virtual Floppy Applet To Become Unresponsive

Driver Update Required For Windows Server 2003 And NetFlex/Netelligent NIC Compatibility

Duplicate Enclosure Entries On The iLO Rack Topology Page With ProLiant BL p-Class Server Blade

Empty Groups in IGMP Data Forwarding Table May Not Be Reinstated when VLAN on Data Server Port of ProLiant BL p-Class GbE2 Interconnect Switch is Reassigned

Enabling Anonymous Access In HP Web-enabled Management Software Security Vulnerability (Reference SSRT4679)

Error Code `(0x4, 0x1, 0, 0)` Encountered During The Windows 2000 Setup Process On ProLiant Servers

Error Message Documentation For bcm5700 Driver Is Missing In The Manual Page For Linux

Error Message When Running Example Configuration Scripts In Version 2.0.0 Of The ProLiant BL p-Class And The ProLiant e-Class GbE Interconnect Switch Management Utilities For Both Windows And Linux

ESX Service Console May Stop Responding After Installing HP Insight Management Agents On VMware ESX Server 2.5

Event ID 258 May Be Logged In Microsoft Windows 2000 Event Log When Using NIC Team

Failure To Reconnect To The Deployment Server If ``Configure Computer`` Task Is Assigned Through The Event Creation Interface

False Error Message Displayed on HP Rack and Power Manager when Shutdown/Restart Dates Span the End of the Year

Fibre Channel Storage Agent Logs `Event ID 4099` Message

FIRMWARE UPGRADE RECOMMENDED On Certain SCSI Hard Drive Models

FIRMWARE UPGRADE RECOMMENDED: Potential SSL Master Key Buffer Overflow Security Vulnerability In iLO And RILOE (Ref. Security Bulletin SRB0043W / SSRT2310c)

FIRMWARE UPGRADE REQUIRED: Smart Array 6i, 641/642, and 6402/6404 Controllers Running Firmware Version Earlier Than Version 2.48 May Report Battery Failure

Forwarding Database Information Page For The HP ProLiant BL p-Class GbE2 Interconnect Switch May Display Incomplete Or Inaccurate Information When Viewed Through The Browser-Based Interface (BBI)

Forwarding Database Search Does Not Display Trunk Ports On HP ProLiant BL p-Class GbE2 Interconnect Switch Unless Using Default Search Criteria Within The Browser-Based Interface (BBI)

Foundation Agents from HP Management Agents Version 7.40 (or earlier) Log Only the First Disk Threshold Event

GUI-Based SuSE Linux Enterprise Server 7 Updates May Abort

Health Driver Installation Fails With `Unresolved Symbol` On ProLiant Servers Running Linux

High CPU Utilization May Occur In HP Systems Insight Manager (HP SIM) When Attempting To Edit User Created System Lists

High CPU Utilization Using HP Storage Agents Under HP System Health Application and Insight Management Agents for Red Hat Enterprise Linux 2.1, Red Hat Enterprise Linux 3 (x86), or UnitedLinux 1.0

HP Advanced System Management (ASM) Software Does Not Load Or May Stop Running On Intel Xeon 800 MHz FSB ProLiant Servers With Certain Processor Steppings

HP BladeSystem Alarm Panel Firmware Release

HP BladeSystem p-Class Power Enclosure Management Module Does Not Properly Identify AC Redundancy in the HP BladeSystem p-Class Server Blade Enclosure with Enhanced Backplane

HP Hot-Plug Memory Configuration Utility Will Display `Either The System BIOS Or The Advanced System Management Controller Driver Does Not Support Hot-Plug Memory` Message On Unsupported Servers

HP Management Agents May Display Numerous Security Messages Using The Version Of Microsoft Internet Explorer 6.0 Shipping With Microsoft Windows Server 2003

HP Management CD Release 6.10 Help File Links Do Not Work On Linux Operating Systems

HP Online Flash Component for Windows - HP Integrated Lights-Out May Not Run if Data Execution Prevention (DEP) Enabled in Microsoft Windows Server 2003 Service Pack 1

HP OpenView Network Node Manager 7.01 May Prevent Insight Management Agents From Communicating Via SNMP

HP Power Manager 3.0 May Not Shut Down A Managed Server On A UPS Low-Battery Event

HP ProLiant Advanced Server Management Driver (Health Driver) Fails To Install On Red Hat Linux 7.3 Professional With A Certain Errata Kernel

HP ProLiant BL p-Class GbE2 Interconnect Switch Loses bootp Supplied IP Address When Using TFTP-Get Config Button From The Browser-Based Interface

HP ProLiant BL p-Class GbE2 Interconnect Switch SAN LED Will Not Illuminate Properly If The Switch Is Running Firmware Version 1.0.0

HP ProLiant Server Configured With Two AMD Opteron 200 Processors And Running Microsoft Windows Server 2003 May Stop Responding During Startup Or Shutdown

HP ProLiant Support Pack for SUSE LINUX Enterprise Server 9 Version 7.30 Does Not Correctly Reinstall and Rebuild Components for Later Version Errata Kernels if RPMs Installed Under Original Kernel

HP Smart Array Device Manager Extension Does Not Detect HP Array Configuration Utility on ProLiant Server Running Microsoft Windows Server 2003 x64 Editions

HP StorageWorks SAN Switch (B-Series) Generates ENC_OUT Errors when Connected to an HP BladeSystem p-Class Enclosure Through an OctalFC Interconnect Module

HP System Management Homepage Fails to Display Agents Information

HP System Management Homepage For An HP Storage Management Appliance Cannot Be Launched From HP Systems Insight Manager Tools Menu

HP System Management Homepage May Not Install from ProLiant Support Pack 7.20 if Domain Username Contains Special Characters

HP System Management Homepage May Not Load After Using HP Version Control Agent For Linux Version 2.0.7 To Install the HP ProLiant Support Pack For Linux Version 7.20 (Or Later)

HP System Management Homepage Version 2.0 May Appear Blank On Microsoft Windows Server 2000/2003 (Japanese Editions)

HP System Management Homepage Version 2.1.2 Processes May Continue Running After Service Stopped

HP Systems Insight Manager (HP SIM) 4.2 Intermittently Generates an Event Storm for Previous Events

HP Systems Insight Manager (HP SIM) 4.2 Software Deployments Will Fail when Multiple Targets are Selected

HP Systems Insight Manager (HPSIM) Inventory Report Product Name Field Is Blank Using `Export To File In CSV Format`

HP Systems Insight Manager (HPSIM) Login Disabled After Installing Microsoft MS04-025: Cumulative Security Update for Internet Explorer (867801)

HP Systems Insight Manager (SIM) 4.2 SP2 Does Not Always Display an Accurate Software Status in the SW Column

HP Systems Insight Manager 4.2 May Record Repeated Error Messages in MX.LOG if Custom Commands Run with the Run Now Button Then Deleted

HP Systems Insight Manager 4.2 SP2 Automatic Event Handling Tasks May Stop Running

HP Systems Insight Manager 4.x - Windows Network Interface Report Does Not Return Duplex and Speed Settings for Most Managed Servers

HP Systems Insight Manager And HP System Management Homepage Do Not Function Properly After Upgrade To Microsoft Windows XP SP2

HP Systems Insight Manager Automatic Event Handling Task - Intermittent Email / Pager Message Storm

HP Systems Insight Manager Message When Editing AEH Task With More Than 100 Criteria

HP Systems Insight Manager Session Lasting More Than One Day May Become Unexpectedly Disconnected If Client Computer Is Running Sun Microsystems Java Plug-in Version 1.4.1_04

HP Tested and Approved Linux Bonding Driver May Report Erroneous Up/Down Status Messages In /var/log/messages On e1000 Drivers

iLO Firmware Version 1.06 (Or Earlier) Does Not Support Headless Server Mode

iLO Firmware Versions 1.02 And 1.06 Do Not Automatically Disable iLO When RILOE II Is Installed

iLO May Send Invalid DHCPREQUEST Packets To The DHCP Server During The IP Address Renewal Phase

iLO Pass-Through Service for Microsoft Windows Terminal Services May Stop Functioning after Restart in a Microsoft Windows Server 2003 Service Pack 1 Environment

iLO Remote Console May Turn Gray After Being Resized From A Linux Client

iLO Remote Console Sessions May Become Unresponsive If Restarting A Session After The Previous Session Has Timed Out When Configured With iLO Firmware Version 1.64 (Or Earlier)

iLO With Firmware Version 1.40 May Be Undiscoverable By DNS Servers On Networks Using DDNS

Inability To Use Administrator Account In Version Control Agent Or Version Control Repository Manager

Incomplete Data Is Displayed When Using The Integrated Lights-Out (iLO) Virtual Serial Port Console On A Server Running SUSE LINUX Enterprise Server 9

Incorrect Boot Partition Size May Occur On Microsoft Windows 2000 Server If Very Large Partition Size (Greater Than Approximately 200 GB) Used During Unattended or SmartStart Assisted Installation

Incorrect Memory Count Reported and Certain Fields Report Fewer Characters or a Zero for the Memory Count Using snmpwalk Command Under SUSE LINUX Enterprise Server 9 (x86/AMD64/EM64T) Reports

Incorrect Rack Diagrams May Be Displayed If No Management Processor Is Discovered From Rack

Incorrect Security Browser Settings Are Displayed When Using SmartStart Release 7.20 With Assisted Installation Of Microsoft Windows Server 2003

Insight Management Agents 7.10 Event Notifier Configuration Wizard May Cause Application Error After Closing Event Selection Dialog Box

Insight Management Agents And Web-Enabled Management Login Session Remains Active For 15 Minutes If The Browser Is Closed Without Logging Out

Insight Management Agents for Linux Version 6.40 Do Not Report Hard Drive Status Correctly To Insight Manager 7

Insight Management Agents For VMware ESX Server 2.5 Cannot Detect Or Monitor Modular Smart Array 1000 (MSA 1000) Or Modular Smart Array 1500 (MSA 1500)

Insight Management Storage Agent For Windows May Generate An Event ID 1192 During A SCSI Tape Backup

Insight Manager 7 And Insight Manager XE May Only Provide The IP Address In Forwarded Events For Device Sending SNMP Trap

Insight Manager 7 Information Represented Via Link `Compaq Subsystem Status Information (Using SNMP)` May Be Outdated Or Non-Existent

Insight Manager 7 May Not Identify ProLiant Servers Running Microsoft Windows Server 2003 As Server Devices

Insight Manager 7 Pager Status Log Message - `Error: TAP Message Block Rejected By Pager Service`

Insight Manager 7 SP1.1 May Not Properly Forward SNMP Trap Information

Insight Manager For CA Unicenter, HP OpenView NNM, Microsoft Operation Manager, Tivoli Enterprise, And Tivoli NetView May Not Receive Storage Traps From Insight Management Agents 6.40

Installation May Not Complete Using the Version Control Repository Manager or Remote Deployment Utility With IP Restricted Logins When Preconfiguring the System Management Homepage (SMH) Component

Installation Of SUSE LINUX Enterprise Server 9 (x86) Or SUSE LINUX On ProLiant BL30p Or ProLiant BL35p Server Blade Will Stop Responding If ReiserFS (Default File System) Or Ext3 File System Is Chosen

Installing Citrix MetaFrame XP Or MetaFrame 1.8 In Windows 2000 Environment Causes Blue Screen With Integrated Lights-Out

Installing The HP ProLiant Support Pack for Microsoft Windows 2003 x64 Editions May Generate A Windows Digital Signature Verification/Logo Testing Dialog Box

Integrated Lights-Out (iLO) And Remote Insight Lights-Out Edition II (RILOE II) Telnet Sessions Use The Same Hot Keys Defined For Remote Console Session

Integrated Lights-Out (iLO) Does Not Properly Respond To PING Packets From Load-Balanced NICs

Integrated Lights-Out (iLO) Firmware Version 1.75 Power Regulator Options are Incorrectly Displayed as Available on AMD Opteron Servers With Certain System ROMs

Integrated Lights-Out (iLO) Login Fails If Client On Same Domain Has Cookies Over 512 Bytes In Size

Integrated Lights-Out (iLO) May Appear Failed on HP System Management Homepage if iLO Was Unplugged from the Network or Has No IP Address

Integrated Lights-Out (iLO) May Falsely Report Remote Console As Unavailable

Integrated Lights-Out (iLO) or Remote Insight Lights-Out Edition II (RILOE II) Idle Session Timeouts May Be Pre-empted by Microsoft Active Directory Service

Integrated Lights-Out (iLO) Performance Degrades During Login And While Running Directory Settings Tests

Integrated Lights-Out (iLO) Rack View Usage Statistics Display Incorrect Maximum Power Output Value for BladeSystem pClass 1U Power Enclosure

Integrated Lights-Out (iLO) Remote Console Displays Error Messages When Running Java (TM) 2 Runtime Environment Version 1.4.0 Or Version 1.4.0_01

Integrated Lights-Out (iLO) Remote Console May Not Display Border Characters Correctly In Red Hat Linux

Integrated Lights-Out (iLO) Remote Console May Not Open When Selecting `No` In Response To Hostname Mismatch Certificate Alert Message

Integrated Lights-Out (iLO) Remote Console May Open With Black Screen And Blinking Cursor

Integrated Lights-Out (iLO) Remote Console Session May Generate Spurious Mouse Selects In Linux Text Window

Integrated Lights-Out (iLO) Remote Console Session May Stop Responding After Surveyor Service Starts

Integrated Lights-Out (iLO) Remote Console Session On A ProLiant BL20p Server Blade Through The Diagnostic Port Does Not Self-Terminate When The Cable Is Disconnected

Integrated Lights-Out (iLO) Remote Console Unavailable When New Remote Console Session Is Opened Immediately After Previous Session Is Closed

Integrated Lights-Out (iLO) Secure Shell (SSH) Feature May Cause Other iLO Features To Be Slow Or Inoperable

Integrated Lights-Out (iLO) Users Cannot Authenticate On Directory Services When `Register With DDNS Server` Option Is Disabled In iLO Network Settings

Integrated Lights-Out (iLO) Virtual Media Applet Error Message `Can`t open file... (error = 32)`

Integrated Lights-Out (iLO) Virtual Media Does Not List USB Diskette Drives or USB Drive Keys as Local Media Drives

Integrated Lights-Out (iLO) Virtual Media Java Applet Cannot Access the Local CD-ROM Drive in a Microsoft Windows Environment When the User Account Is Not a Member of the Local Administrator Group

Integrated Lights-Out (iLO) Virtual Media Rejects Valid Images After Inserting an Invalid Image Using CLP or XML Interface

Integrated Lights-Out (iLO) Virtual Media USB Drive Key Will Not Boot to DOS

Integrated Lights-Out (iLO) Web Agent Homepage May Display Incorrect NIC Speed

Integrated Lights-Out (iLO) Web Server Connectivity May Temporarily Be Lost

Integrated Lights-Out (iLO) with Firmware Version 1.80 Resets if Incorrect Virtual Medial (VM) Image is Inserted with Deprecated CLI `vm - insert` Command

Integrated Lights-Out Event Log Time May Not Synchronize With Linux Operating System

Integrated Lights-Out View Of Integrated Management Log (IML) May Not Synchronize With Management Agents IML Viewed Through Insight Manager 7

Integrated Lights-Out Web Page Data Fields May Not Save Correctly If The Page Is Saved Prior To The Page Being Fully Loaded

Intermittent Blue Screen With STOP 0x4E Running Integrated Lights-Out (iLO) Management Interface Driver For Windows Version 1.4.0.0 C Or Version 1.4.0.0 D

Internet Explorer Application Error May Occur When Array Configuration Utility (ACU) Version 6.40 Is Running In ``Local Application Mode`` In A Windows 2000 Server Or Windows Server 2003 Environment

Invalid Password In HP Lights-Out XML PERL Scripting Sample For Linux May Delete Integrated Lights-Out (iLO) User List

IP Addresses For Multiple NICs May Be Associated With The Same Hostname In /etc/hosts File With SuSE Linux Enterprise Server 7

IRQ Sharing May Impact Performance of ProLiant Servers after Upgrading to VMware ESX Server 2.x

Job Scheduler in ProLiant Essentials Rapid Deployment Pack - Linux Edition 1.20 May Not Execute Scheduled Jobs

Linux Bonding Driver May Not Enslave Network Interfaces If Multiple Network Drivers Are Loaded

Linux Deployment Utility Version 1.0.7-7 Automatic Eject/Reboot Option does not Function on ProLiant Servers Installing Linux ProLiant Support Pack Version 7.30 or 7.40 for Red Hat Enterprise Linux 4

LINUX DRIVER UPDATE REQUIRED: ProLiant BL20p Server Blade Running Red Hat Linux Advanced Server 2.1, Red Hat Linux 7.3, Or SuSE Linux Enterprise Server 7 Requires Driver Updates

Local Client Diskette Drive Operations Should Not Be Performed While The Drive Is Assigned As An Integrated Lights-Out (iLO) Virtual Floppy Drive

Local Security Policies Are Renamed And Become Invalid After Running Altiris SIDgen.EXE During Setup On ProLiant Servers

Lockup Or An Error May Occur During File Copy When Running A SmartStart Scripting Toolkit Unattended Installation With NC7770, NC7780, And NC7781 Gigabit Server Adapters

Logging Into Insight Manager 7 After Installation Using A System Running Microsoft Windows XP Professional

Logical Drive Syntax Error Generated by HP ProLiant Array Configuration Utility Command Line Interface (HPACUCLI) when Specifying `drives=all` Parameter

Login May Be Required When Deploying HP System Management Homepage for Windows Version 2.1.0.121 from HP Systems Insight Manager 4.x

Login to HP ProLiant Essentials Virtual Machine Management Pack Plug-In for HP Systems Insight Manager 4.x Does Not Succeed if User Name Contains Non-Alphanumeric Character

Logon Access may not be Successful When Two Users Attempt to Access Integrated Lights-Out (iLO) Remote Console Simultaneously

Managed SLES 9 SP1 Server May Be Unable To Determine The Fully Qualified Server Domain Name When Changing The Host Name With The Rapid Deployment Pack - Windows Edition 2.00

Management Agent Name Is Displayed Four Times In The Version Control Agent Catalog

Microsoft Windows 2000 Guest OS (Virtual Machine) on VMware ESX Server Does Not Start When ESX Server Is Running on ProLiant Servers that Include Certain Intel Processors

Microsoft Windows 2000 May Blue Screen With A Stop 0x7F Message When Using NC77XX And NC67XX Series Network Controllers

Microsoft Windows Bugcheck Event Will Not be Written to the Integrated Management Log (IML) when Using Certain Versions of the CPQASM2.SYS Driver

Microsoft Windows Server 2003 May Not Boot When EMS Console Support Is Set To Remote And Integrated Lights-Out (iLO) Is Disabled

Microsoft Windows Server 2003 Service Pack 1 (SP1) Will Not Install Properly On ProLiant Essentials Vulnerability And Patch Management (VPM) Server

Microsoft WINNT.EXE Installation Utility Can Run Out Of Memory When Using Rapid Deployment Pack Version 1.20 To Deploy Microsoft Windows 2000

Migrating Custom Events Based On Windows 2000 Scripted Install Events From The Rapid Deployment Pack 1.0 And 1.10 To The Rapid Deployment Pack 1.20

MPINET32.CAT File Reference Must Be Changed In The TXTSETUP.OEM Sample Files Used With Windows Server 2003 Installations Using The SmartStart Scripting Toolkit

Multiple Entries Of Insight Manager 7 Server Displayed In Device List

NC31XX Fast Ethernet Adapters Using The ProLiant Network And Configuration Utility In Windows 2000 May Receive A `InitAdapterError` Message Running Diagnostics

NET-SNMP snmpd Process May Consume Excessive CPU Time With Red Hat Linux 8.0

NetWare 5.1 May Become Unresponsive Under Heavy I/O When Running CPQMPK.PSM Or MPS14.PSM On A ProLiant DL360 G4, DL380 G4, ML350 G4, ML370 G4, Or BL20p G3 Server

Network Installation Of Red Hat Linux Advanced Server 2.1 May Fail Using iLO Virtual Floppy Drive With ProLiant Servers

NIC Agents For Windows Version 5.50.0.0 Does Not Display Teamed NICs In Insight Manager 7 Or Insight Manager (Win 32)

NIC Teams Cannot Be Created On A Windows 2000 Server With Terminal Services Running

Non-Visible Characters In The Integrated Lights-Out (iLO) Command Line Protocol (CLP) Output May Cause Display Discrepancies If Another Scripting Tool Is Used Interactively With CLP

Offline Utilities May Not Start Properly On Systems Using SmartStart 6.30 (Or Later) If The Application Is Started Immediately After Closing Another Utility

Online ROM Flash User Guide Links Broken For All Languages Except English On SmartStart Release 6.20 CD Under Linux

OpenSSH Client Unable to Connect to HP Systems Insight Manager Server when using MXAGENTCONFIG Utility

Patches are Removed After Reinstallation of the ProLiant Essentials Vulnerability and Patch Management Pack

Performance Management Pack (PMP) Database Does Not Allow Manual Log Purge or Reports Via HP Systems Insight Manager if PMP Database is 7 GB or Larger

Performing Hardware Configuration Using Kudzu During Server Boot is not Successful when Using CTRL+ALT+F7 Virtual Graphical Console

POST Message `Integrated Lights-Out Is Disabled` After RILOE II Is Removed From A ProLiant Server With iLO

POST Message `keyboard not present` May Be Displayed If The Integrated Lights-Out (iLO) Is Configured To Use DHCP And The NIC Is Unplugged

Power Regulator (Power Governor) Feature Does Not Function Correctly When Configured Using iLO With Firmware Version 1.70

Preconfiguring HP Systems Management Homepage Component Through Version Control Repository Manager Before Deployment May Require Manual Copy Of Trusted Certificates

Pressing ``CTRL+BREAK`` Does Not Stop Server Diagnostics Continuous Looping Mode On ProLiant BL20p Server Blade

Previous Management Agent Trap Events May Be Resent To Insight Manager

Previous Version Of HP Insight Diagnostics Is Not Removed When Upgrading To HP Insight Diagnostics Version 7.0.0.1198

ProLiant BL C-GbE And F-GbE Interconnect Switches (p-Class and e-Class) Support Mono-Spanning Tree Protocol (IEEE 802.1D), But Multiple Spanning Tree Domains (IEEE 802.1s) Are Not Supported

ProLiant BL e-Class And ProLiant BL p-Class C-GbE Interconnect Switch Link Failure May Occur With Forced Speed/Duplex Settings On Uplink Ports

ProLiant BL e-CLass and ProLiant BL p-Class Server May Not Be Properly Renamed After Imaging And Becomes Inaccessible From The Network When Using Rapid Deployment Pack

ProLiant BL p-Class Management Module Firmware Update May Not be Successful

ProLiant BL20p G3 Server Blade and ProLiant ML350 G4 Server may Stop Responding when the MPS Table Mode is Set to Disabled in the RBSU

ProLiant BL20p Server Blades Containing Integrated Lights-Out May Not Power Down

ProLiant BL30p or BL35p Server Blade May Not Boot If Using Optional QLogic Fibre Channel Adapter

ProLiant BL35p Server Blade Configured With The Dual-Port Fibre Channel Adapter Will Stop Responding During POST Under Certain Conditions

ProLiant BL45p Blade Server Configured with an AMD Opteron 200 Series Processor Will Not Boot

ProLiant BL45p Blade Server Running Microsoft Windows Server 2003 x64 Editions Does Not Properly Monitor all Fans and Temperature Sensors

ProLiant Essentials Intelligent Networking Pack License Errors May Occur on HP ProLiant Blade Servers Running the Network Controller Drivers Ethernet (NCDE) Version 8.0

ProLiant Essentials Intelligent Networking Pack License Errors May Occur On ProLiant Servers Running in a Microsoft Windows Server 2003 (SP1) or Microsoft Windows Server 2003 x64 Editions Environment

ProLiant Essentials Rapid Deployment Pack - Linux Edition Web Console may not be Accessible

ProLiant Essentials Rapid Deployment Pack - Windows Edition 1.60 Jobs Do Not Complete with a Linux Target Running HP System Management Driver 7.1.1-xx

ProLiant Essentials Rapid Deployment Pack - Windows Edition 2.00 and 2.10 Do Not Properly Set the Agent Transport Setting to TCP/IP on Managed Linux or VMware Servers

ProLiant Essentials Vulnerability and Patch Management Pack (VPM) Displays Task Execution Error in the HP SIM Task Result Window

ProLiant Essentials Vulnerability And Patch Management Pack (VPM) Does Not Function After Altiris Notification Server 6.0 Is Installed On The Same System

ProLiant Essentials Vulnerability And Patch Management Pack Installation May Not Complete While Installing RMS

ProLiant ML/DL Scripted Install For Microsoft Windows 2003 Event Fails After Upgrading From Rapid Deployment Pack Release 1.30 To Rapid Deployment Pack Release 1.31

ProLiant Server Running NetWare 6.5 SP2 Overlay May ABEND While Upgrading To ProLiant Support Pack For NetWare Version 7.10

ProLiant Server Running Windows 2000 Server May Blue Screen With An ``E3 RESOURCE_NOT_OWNED`` Message

ProLiant Servers Receiving An Installation Of Microsoft Windows Server 2003 Using The UNATTEND.TXT File With The `OEMPreinstall` Flag May Generate An Error

ProLiant Servers Running The iLO Advanced And Enhanced System Management Controller Driver (CPQASM2.SYS) May Stop Responding During An Upgrade From Windows 2000 To Windows Server 2003

ProLiant Servers That Use Active Directory Or eDirectory With A Blank Password May Be Prevented From Logging Into RILOE, RILOE II, Or iLO

ProLiant Servers With iLO Firmware Version 1.15 - 1.40 Do Not Support Hot Plug PS/2 Keyboard Functionality

ProLiant Support Pack Download Pages On The SmartStart Release 6.20 CD Do Not Display Properly With Linux And Netscape Navigator 4.79

ProLiant Support Pack Or Smart Component Installation May Not Start Correctly When Initiated From The Version Control Agent (VCA) Home Page

ProLiant Support Packs Version 7.11 For Linux Must Be Manually Copied Into The Version Control Repository Manager Instead Of Uploaded

Rapid Deployment Pack - Windows Edition 2.00 May Not Complete A Reboot Task On A Managed Server Running VMware ESX Server

Rapid Deployment Pack - Windows Edition 2.00 Scripted Install Jobs May Stop When Using Microsoft Windows Server 2003 SP1

Rapid Deployment Pack (RDP) - Windows Edition 2.00 Displays The Name Property For A Managed VMware ESX Server As `Untested/Unidentified`

Rapid Deployment Pack 1.20 Downloadable ISO Image Contains Invalid Directory Name

Rapid Deployment Pack Capture Of Windows Image Fails With Message `FIRM Error 1294592`

Rapid Deployment Pack Tasks That Reset A NIC During Execution Cause Incomplete Or Failed Task Status In The AClient

Recommended Mouse Settings When Using The Remote Insight Lights-Out Edition II (RILOE II) Remote Console With SuSE Linux Enterprise Server 7

Recommended Mouse Settings When Using The Remote Insight Lights-Out Edition II (RILOE II) Remote Console With SuSE Linux Enterprise Server 8

Red Hat Enterprise Linux 3 And Red Hat Enterprise Linux 2.1 Report Errors When Enslaving Bond (Teamed) Interfaces

Red Hat Enterprise Linux 3 Update 4 (AMD64/EM64T) Installation to HP 6-Port SATA RAID Controller Stops Responding While Formatting /dev/sda

Red Hat Enterprise Linux 4 (x86)/(AMD64/EM64T) Mouse May No Longer Be Visible After Connecting To The Integrated Lights-Out (iLO) Virtual Media

Red Hat Linux 8.0 Professional Image Capture Via Rapid Deployment Pack 1.30 Displays A Console Message But Does Not Impact Functionality

Remote Console May Not Function After Upgrading RILOE II Firmware From Version 1.01 To Version 1.12 (Or Later)

Remote Insight Information Sub-Agent Moved From Active To Inactive During ProLiant Support Pack (PSP) Installation

Remote Insight Lights-Out Edition II (RILOE II) Diagnostic Functions In HP Insight Diagnostics Version 7.0.0.1198 Are Disabled If Certain ProLiant Support Packs Are Installed

Replicating Agent Settings or Manually Changing Settings in System Management Homepage Version 2.0.2 will not be Permanent if SMH was Upgraded from Version 2.0

Routers Using `UDP Helpers` May Not Propagate DHCP Packets From Integrated Lights-Out (iLO) When The iLO Name Is Less Than 13 Characters

Runtime Error Reported When Opening A Previously Configured Compaq Version Control Agent In The Compaq Component Configuration Tool From The Compaq Support Paq For Windows

Search Functionality In Help File Of Insight Management NIC Agent Does Not Work And Search Functionality For Other Components Is Not Present

Sending Traps from HP Systems Insight Manager 4.2 SP2 - Windows to the HP Network Node Manager Version 7.5 / HP-UX May Cause the Web-Based Alarm Browser to Stop Responding

Server Diagnostics Version S11.03A Does Not Display Diskette Errors In The Log Status / View Details Window

Server Diagnostics Version S11.03A Tests Only One CD-ROM Drive Or DVD-ROM Drive In A Server

Server Hardware Information Not Sent By Web Agent Under Microsoft Windows .NET Server 2003

Server Performance Status Displays As Critical (Red) In Insight Manager 7 (IM7) After Upgrade To Insight Management Agents 7.10

SERVER.EXE May Not Load Automatically During Server Boot After SmartStart Release 7.30 Assisted Path Installation of NetWare 6.5 or NetWare 5.1

SmartStart Release 6.40 to Release 7.30 Will Not Boot on Systems with Greater Than 32 Gigabytes of RAM

SmartStart Release 7.20 Insight Management Agents May Not Populate System Management Homepage (SMH) If The Agents Are Installed Without Other SMH Web Applications

SmartStart Scripting Toolkit Virtual Floppy Utility (VFLOP.EXE) Does Not Work With USB-Based Virtual Floppy Ability On Integrated Lights-Out (iLO)

SNMPWalk Command with HP MIB Under Red Hat Enterprise Linux 3 (x86) or Red Hat Enterprise Linux 3 (AMD64/EM64T) Displays Incorrect System Memory and Swap Drive Size

Some Features Of Insight Manager 7 May Not Function Correctly When Using Certain Gigabit Ethernet Adapters Without A Driver Update

Some ProLiant Servers Do Not Allow Microsoft Windows NT Server 4.0, Windows 2000, Or Any Edition Of Windows Server 2003 To Display Dates Prior To The Year 2000

Starting A Remote Console Session Using The Integrated Lights-Out Web Interface May Result In A Blank Screen

Status Of Folders Under `My Favorites` On HP Systems Insight Manager (HP SIM) `System Lists` Panel May Not Match Status Of Items On `All Systems` Panel

Storage Agents For Linux Fail To Install On ProLiant Server Running Red Hat Linux 8.0 Professional

Storage Traps May Not Be Received In Insight Manager 7, HP OpenView, Or Other Management Applications After Installing Insight Management Agents Version 6.40

StorageWorks MSA500 G1, MSA500 G2, and MSA1000 Enclosures Not Configured to Use 100 Percent Write Cache May Have Stale Read Cache Data

Support Pack Installations Under Windows NT Server 4.0 Will Not Complete Successfully If A Component Times Out During Installation

Survey Utility For Windows Will Terminate Unexpectedly With Application Exception Message On ProLiant Servers Attached To 40 (Or More) Hard Drives

SUSE LINUX Enterprise Server 8 (AMD64 and x86) SP3 And SP4 Installations Will Cause The Mouse To Stop Responding On ProLiant Servers When iLO Is Disabled

SUSE LINUX Enterprise Server 9 (x86)/(AMD64/EM64T) Installation May Take Three to Four Hours on ProLiant BL20p G3 Server Blade Using iLO Virtual Media

Switch-Assisted Load Balancing (SLB) NIC Teams Configured With Network Configuration Utility For Windows Version 7.85 May Experience Network Connectivity Faults

SYS.COM Is Not An ``Optional`` Component During Installation of Rapid Deployment Pack If Linux Scripted Installation Events Are To Be Run

System Clock May Report Inaccurate Time when Upgrading the System ROM on ProLiant Servers with the AMD Opteron Processor AMD PowerNow! Feature

System Management Homepage (SMH) may Grant Access Rights of Local OS Groups to Domain OS Groups with the Same Group Name

System Management Homepage Running On VMware ESX Server 2.5 May Appear Unresponsive

SYSTEM ROM UPDATE RECOMMENDED: ProLiant BL25p and ProLiant BL45p Blade Server May Intermittently Exhibit a Temperature Violation Error under Normal Operating Conditions

SYSTEM ROM UPGRADE RECOMMENDED for ProLiant BL25p, ProLiant BL35p, ProLiant DL385, ProLiant DL585 Servers to Prevent Potential System Hang using Integrated Lights-Out (iLO) Virtual Serial Port Feature

Systems Insight Manager Will Not Recognize Remote Insight Lights-Out Edition II (RILOE II) Or Integrated Lights-Out (iLO) If HTTPS Port Is Changed

Tape Backup In StorageWorks Enterprise Backup Solution (EBS) Environment On ProLiant Server May Not Complete If Insight Management Storage Agents Are Loaded

TFTP Via Telnet May Cause HP ProLiant BL p-Class GbE2 Interconnect Switch Running Firmware Version 1.0.0 To Panic

The `Save` Command On The HP ProLiant BL p-Class GbE2 Interconnect Switch Running Firmware Version 1.0.0 Will Not Save Telnet Port Setting If Value Other Than Default Is Entered

The Change Configuration Task In The Rapid Deployment Pack Does Not Correctly Set The Gateway And DNS Settings When The Target Server Is Running Red Hat Linux

The CR3500 Configuration Utility Does Not Add Proper File Extension

The Erase Utility Included With Rapid Deployment Pack Release 1.40 Cannot Be Used With Smart Array 64X Controllers Or Smart Array 64XX Controllers

The Remote Deployment Console Utility (SETUPC.EXE) Has Been Enhanced On SmartStart Release 6.20 (And Later) To Allow Running Multiple Instances On The Same System

Third-Party Switches With Spanning Tree Protocol Disabled May Prevent ProLiant BL e-Class And ProLiant BL p-Class C-GbE Interconnect Switches From Identifying Data Loops

Trunk Groups That Contain Port 1, Port 17, Or Port 18 Are Not Displayed When Viewing Trunk Group Information For The HP ProLiant BL p-Class GbE2 Interconnect Switch Via The Browser-Based Interface

Unable To Log Into Insight Manager 7 (IM7) After Installing HP Rack And Power Manager Version 1.1

Unable To Log Into Insight Manager 7 On Systems With Renamed Domain Accounts

Unable To Modify The ProLiant BL p-Class Server Enclosure Or Rack Infrastructure Name Using The Integrated Lights-Out (iLO) User Interface

Updating Microsoft XML Parser Requirements For Remote Deployment Utility For Windows NT 4.0 And Windows 2000 - ProLiant Support Pack 5.50 and 6.00

Upgrading Integrated Lights-Out (iLO) Firmware Using The Windows Flash Component From Within A Terminal Services Session Will Not Complete

Uploading any Windows ProLiant Support Pack (PSP) from the SmartStart CD Upload Utility to the Version Control Repository Manager (VCRM) will not be Successful if the Default Browser is Mozilla

UPS R3000 XR May Not Switch From Internal Battery Power When Generator Comes Online As Main Power Source

USB Mouse Does Not Function Under Integrated Lights-Out (iLO) Remote Console On ProLiant Servers Running Linux

Use Local Administrator Account To Install OpenSSH As Part Of HP Systems Insight Manager For Use With ProLiant Essentials Vulnerability And Patch Management Pack (VPM) Release 1.0

Use Of TCP/IP Reserved Port Zero Causes Integrated Lights-Out (iLO) To Stop Responding

Users Directed To Previously Selected Page When Inactivity Timer Expires On Integrated Lights-Out (iLO) Controller

Using insmod Command to Load the HP NC10xx/67xx/77xx/150x/320x/325x Gigabit Ethernet NIC Driver for Linux Causes a Panic if the tg3 Module is Already Inserted in the Kernel on ProLiant Servers

Using Lights-Out Migration Command Line Utility (HPQLOMGC.EXE) To Upgrade iLO, RILOE, And RILOE II Firmware From A Version Supporting Directory Services To A Later Firmware Version

Using ProLiant Essentials Rapid Deployment Pack 1.30 (Or Earlier) Will Display e2prep Process Under Linux As `3`

Using The HPQLOMIG Utility To Configure RILOE, RILOE II, Or iLO May Prevent Users From Authenticating To The Device

Using The Microsoft Remote Installation Service Client To Install Windows Server 2003 On ProLiant BL20p G2 and G3 Servers May Result In The Display Of `Shift` And Key Strokes

Using Version Control Agent 2.1.0 To Attempt Manual Reinstallation Of Some Linux Component RPMs Without Force Option May Return `Major` In Version Control Agent Result Page Instead Of `Informational`

Version Control Agent (VCA) May Report Degraded Server Status Following Removal Of A Hardware Option

Version Control Agent Displays and Updates Firmware for Only One Smart Array Controller on ProLiant Servers Configured with Multiple Smart Array Controllers

Version Control Agents for Linux May Not be able to Retrieve Software Inventory on ProLiant Server Running SUSE LINUX Enterprise Server

Version Control Repository Automatic Update Schedule May Not Reset When The System Time Is Updated

Version Control Repository Manager (VCRM) Home Page Displays ProLiant Support Packs for Linux as `Invalid`

Version Control Repository Manager (VCRM) Not Accessible After Installing HP Systems Insight Manager (HPSIM) 4.1

Version Control Repository Manager May Not Recognize Recent ProLiant Support Pack Files

VLAN(s) No Longer Displayed In HP Network Configuration Utility (NCU) When Other Network Adapters Are Disabled

VMware ESX Server May Not Boot and a Kernel Panic May Occur when Shared and Dedicated Smart Array Controllers use the Same Driver and ProLiant Servers Running VMware ESX Server 2.x

VMware ESX Server VMkernel May Not Load on ProLiant BL45p Blade Server with Three or Four Processors and a System ROM dated Prior to 8/31/05

VMware Log Files for Virtual Machines may fill up with Excessive Virtual Machine Status Messages After Installing the HP Virtual Machine Management Agent Version 1.1 (or earlier)

When Using Remote Deployment Utility or Version Control Manager to Upgrade the System Management Homepage from Version 2.1.0 to Version 2.1.2 Preconfigured Settings in Version 2.1.2 may be Lost