HP Passport Sign-in

``iLO Not Responding`` Error Appears During POST On ProLiant DL360 G2 Server When Integrated Lights-Out Is Connected To A Linux DHCP Server That Issues WINS IP Addresses

`Next` Button May Not be Available when Custom Installation is Selected for HP Systems Insight Manager (HP SIM) Using the Management CD or Systems Insight Manager Download Pages

`Page Cannot be Displayed `Message Occurs when Running Array Configuration Utility Version 7.15x.0 in Local Application Mode under Microsoft Windows Server 2003 Service Pack 1

`Page Cannot Be Displayed` Message During Port Operational Status Modification Attempt On The HP ProLiant BL p-Class GbE2 Interconnect Switch Running Firmware Version 1.0.0

`Password Is Invalid` Message May Occur When Connecting to a Deployment Server Using the Altiris Boot Disk Image from ProLiant Essentials Rapid Deployment Pack - Windows Edition

`REM Bootwork Unload` Tag Causes The Deployment Job To Stop Responding When Using Bootworks Boot Diskettes With The Rapid Deployment Pack - Windows Edition Release 1.40

`Software is not Installed on the system...` Message is Always Displayed when running HP NC10xx/67xx/77xx/150x/320x Gigabit Server Adapter Online Firmware Upgrade Utility for Windows 2000/Server 2003

`STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL` Message May Be Displayed on a ProLiant Server Configured with a Smart Array 5x or 6x Controller Running Microsoft Windows Server 2003, Enterprise x64 Edition

`Upgrade Failed` Message or Command Prompt Displayed when Attempting to Upgrade ProLiant BL p-Class Server Blade and Power Management Module Firmware using cpqblru On SUSE LINUX Enterprise Server 9

A Fan Status Change Trap Is Sent For Both Fans On A Cisco Gigabit Ethernet Switch Module (CGESM) Even When There Is No Status Change On The Second Fan

ACU and ACU CLI Stop Responding when Using Red Hat Enterprise Linux 4 or SUSE LINUX Enterprise Server 9

Advisory: (Revision) Cisco Catalyst Blade Switch 3020/3120 for HP c-Class BladeSystem - Switch Ports Connected to the HP BL-c Adapter(s) May Not Be Available After Rebooting Server Blade

Advisory: (Revision) HP BladeSystem- HP Bladesystem c7000 Onboard Administrator May Report Incorrect Device Status After Removal and Reinsertion of the OA Module into the OA Tray

Advisory: (Revision) HP BladeSystem Mezzanine HBAs - Server May Blue Screen if Drivers for the Emulex and QLogic HBAs on the SmartStart or ProLiant Support Pack 8.10 or 8.15 CD Are Used With HP BL Emulex and QLogic Mezzanine Host Bus Adapters

Advisory: (Revision) HP Integrated Lights-Out (iLO/iLO 2) - HP Integrated Lights-Out (iLO/iLO 2) Versions 1.93/1.70 (or Earlier) Online ROM Flash Components for Linux Are Not Compatible with HP iLO Channel Interface Driver Version 8.2.0 (or Later)

Advisory: (Revision) HP Integrated Lights-Out 2 (iLO 2) - Disabling HP iLO Management Channel Interface Driver in Windows Device Manager will Disable iLO 2 Remote Console Keyboard / Mouse and Cause Long Delay During Boot

Advisory: (Revision) HP NC532m/NC532i Network Adapters - NC-Series Broadcom 10 Gb Multifunction Driver for Linux (bnx2x) Version 1.45.19 Does Not Support More Than Eleven Virtual Network Adapters

Advisory: (Revision) Linux - ProLiant server running Red Hat Enterprise Linux 4 or Red Hat Linux Enterprise 5 Configured with the HP SNMP Performance Monitor Agent (cmaperfd) May Display High CPU Utilization

Advisory: (Revision) ProLiant and Integrity Servers: SATA Hard Drives - FIRMWARE UPGRADE REQUIRED to Ensure That Certain SATA Hard Drives Are Not Susceptible to a Potential and Rare Condition in which Stale Data is Returned from the Drive Cache

Advisory: (Revision) ProLiant and Integrity Servers: Smart Array Controllers - Correcting the "1716" POST Error Message Observed After a Drive Array Rebuild Operation

Advisory: (Revision) ProLiant Servers - Servers with Equal to or Greater Than 64 GB of Memory May Stop Responding While Booting SmartStart 8.25 (or Earlier), Firmware Maintenance CD 8.50 (or Earlier), or HP BladeSystem Firmware Deployment Tool CD 1.60

Advisory: (Revision) ProLiant Servers: iLO 2 - Script Error Displayed When Navigating to Network Settings in the iLO 2 Web Interface on Servers That Do Not Support the iLO 2 Shared Network Port Option

Advisory: (Revision) Red Hat Enterprise Linux 4 or 5 - hpasmxld or hpasmlited Segfault Messages Are Displayed in /var/log/messages Log File When High Number of Broadcast Messages Are Sent (Broadcast Storm) on the HP Integrated Lights-Out 2 Network

Advisory: (Revision) Sun Solaris - HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter on HP ProLiant BL280c G6 Server Blade Will Not be Detected During Installation of SUN Solaris 10 5/08, 10/08 & 5/09 with Network Driver Packaged with Solaris

Advisory: (Revision) Sun Solaris 10 - Installation of Sun Solaris 10 on a ProLiant BL2x220c G5, ProLiant BL260c G5, ProLiant BL280c G6 , or ProLiant BL490c G6 Server Blade Will Display "No Disks Found" When the SATA Controller Is Configured for RAID Mode

Advisory: (Revision) System Management Homepage (SMH) Version 3.0.2 - SMH Version 3.0.2 Configured With ProLiant Support Pack (PSP) Version 8.30 May Not Display Data In the Integrated Management Log (IML) Entries Section When Using IE 8.0

Advisory: (Revision) Virtual Connect Enterprise Manager (VCEM) Version 1.30 - Server Blades May Not Receive an IP Address When Configured With Multiple Networks and One Untagged Network

Advisory: (Revision) VMware ESX and vCenter 4.0 - After Restarting the VMM Service, the vCenter 4.0 Events Are Not Logged In HP Systems Insight Manager (HP SIM) and the Distributed Power Management (DPM) Suspend/Resume Events Are Not Monitored

Advisory: `Unsupported Module, Tainting Kernel` Message Occurs when Installing SUSE LINUX ES 9 SP1 on a ProLiant Server

Advisory: Bolt on HP Power Distribution Unit Installed in HP 10000 Series Rack May Not Allow Rack Door to Close

ADVISORY: Brocade 8Gb SAN Switch for HP BladeSystem c-Class requires HP StorageWorks Fabric Operating System 6.2.0d or later for 8Gb Mezzanine HBA support

Advisory: Certain HP ProLiant G6-Series 2P Servers - CUSTOMER ACTION RECOMMENDED To Prevent Erroneous "Correctable Memory Error-Threshold Exceeded" Message and LED Illuminating Amber on SID: Change the Power Management Setting In the RBSU

Advisory: Disabling Port Trunk On Uplinks Or XConnects May Cause STP Loop On ProLiant BL p-Class GbE2 Interconnect Switch

Advisory: Dynamic Power Capping - Certain ProLiant G6-Series Servers Require a Minimum Firmware Version for Integrated Lights-Out 2 (iLO 2), Power Management Controller, and System ROM to Support Dynamic Power Capping

Advisory: Error When Attempting to Import HP StorageWorks SAN Switches MIB Configuration file into HP Systems Insight Manager 4.2 on ProLiant Servers

Advisory: FIRMWARE UPGRADE RECOMMENDED: Bluescreen Hardware Malfunction, ABEND, or Panic Possible When Some PCI-Express Adapters Configured in ProLiant Server

Advisory: HP BladeSystem - c-Class Enclosure Power Supply May Report a False N+N Redundancy Failed Message and Immediately Report a Repaired Status

Advisory: HP BladeSystem - HP Onboard Administrator Firmware 2.50 Displays "Unknown" for all Server Blade Names in the Insight Display (LCD), DVD Connect Screen, KVM Menu Screen, SNMP, and Alertmail Interfaces

Advisory: HP BladeSystem c3000 Enclosure - KVM Interface Module May Fail to Connect to an Attached ProLiant Server Blade

Advisory: HP BladeSystem c-Class - Integrated Lights-Out 2 (iLO 2) Integrated Remote Console (IRC) Keyboard/Mouse and Onboard Administrator (OA) Login GUI May Intermittently Slow Down or Become Unresponsive

Advisory: HP BladeSystem c-Class Onboard Administrator (OA) - OA Command Line Interface (CLI) Command "upload config" Fails When the Specified URL is Longer than 64 Characters

Advisory: HP Insight Diagnostics - Test Status of Device Diagnostics in HP Insight Diagnostics Version 8.15 Indicates "Unknown" for Logical Drives

Advisory: HP Insight Diagnostics 8.30 - Offline Diagnostics May Stop Responding During the "Random Read Test, " Displaying a Testing "Status" Bar Without Further Progress

Advisory: HP Insight Diagnostics Offline Edition 8.3.0 - Multiple Diagnostic Tests May Falsely Fail if the "Begin Testing" Button Is Clicked More Than Once

Advisory: HP Insight Management WBEM Provider 2.4.0 for Windows - Memory Leak in "Handle Count" and/or "Private Bytes" May Be Observed in WMI Processes When the Server Platform Providers Are Handling Continuous Requests

Advisory: HP Insight Management WBEM Providers 2.3.0.0 - Host Discovered Resources (HDR) WMI Provider May Cause a Handle Leak in Windows Server 2008 x64

Advisory: HP Insight Management WBEM Providers Version 2.3.0.0 - Windows Management Instrumentation (WMI) CIM Studio May Display An Error Message Or SAS Card Information When Querying for Certain Fibre Channel Classes

Advisory: HP Insight Orchestration 1.0 - Insight Dynamics - VSE Logical Servers May Cause Node Conflicts in HP Systems Insight Manager (HP SIM)

Advisory: HP Insight Power Manager - Incorrect Data May Be Reported When More Than One Enclosure Is Selected

Advisory: HP Insight Server Migration Software (SMP) - Installation of HP Insight Virtual Machine Manager Software (VMM) 3.6 or 3.7 Uninstalls the "Install SMP Agent" Tools from HP Systems Insight Manager (HP SIM)

Advisory: HP Insight Server Migration Software for ProLiant (SMP) - Mouse and Keyboard Drivers May Not Load After a Successful SMP Physical to ProLiant (P2P) Server Migration of a Windows Operating System

Advisory: HP Insight Server Migration Software- Migration to a Destination Server On Which Hard Disk Drives Are Already Configured May Fail During the Disk Cloning Operation

Advisory: HP Integrated Lights-Out 2 (iLO 2) - Hard Drive Product ID Numbers May Be Displayed in the Incorrect Drive Status Entry Line on the iLO 2 Drive Status Page

Advisory: HP Integrated Lights-Out 2 (iLO 2) - iLO 2 May Trigger an Automatic Server Recovery (ASR) During a Network Broadcast Storm

Advisory: HP Integrated Lights-Out 2 (iLO 2) - Opening iLO 2 Remote Console Session While iLO 2 Firmware Upgrade is in Progress May Result in an Unusable iLO 2 Firmware Image

Advisory: HP NC-Series Broadcom 1Gb Multifunction Driver for Windows Server 2008 - Erroneous Message, "Could Not Load Driver Software" Displayed in "View Problem Summary" Page in Control Panel After NC-Series Broadcom 1Gb Multifunction Driver Is Installed

Advisory: HP NC-Series Network Interface Controllers (NICs) May Not Join NIC Team During Initialization When Using Certain Versions of Network Configuration Utility for Windows on ProLiant Servers

Advisory: HP Network Configuration Utility (NCU) for Windows Server - "An Error Occurred Due to Invalid Data in the XML File Used by This Application" Message Displayed After Selecting the VLAN Tab Under Properties

Advisory: HP Onboard Administrator- OA Firmware Version 2.25 "SET EBIPA NONE" CLI Command Results in Improper Enclosure Bay IP Addressing Entries

Advisory: HP Onboard Administrator - OA Firmware Version 2.25 (or Earlier) May Report False Power Supply Removal and Insertion Events

Advisory: HP Onboard Administrator - The "Show Config" Command Does Not Include the "Assign Server" Output

Advisory: HP Onboard Administrator (OA) - The HP BladeSystem c-Class Standby OA Network Interface May Not Initialize

Advisory: HP Performance Management Pack (PMP) - PMP Version 5.2.2 (or Earlier) Does Not Detect VMware ESXi 4.0 Host as a Performance Manageable Device

Advisory: HP ProLiant Firmware Maintenance CD - Unable to Boot to Firmware Maintenance CD Image on USB Key Using Integrated Lights-Out 2 (iLO 2) Virtual Media

Advisory: HP ProLiant Servers - Certain ProLiant Servers Configured with Maximum Amount of Memory May Stop Responding When Accessing the Diagnostics Utility or After the First System Boot When Configured with a System ROM Prior to June 2009

Advisory: HP ProLiant Servers - Error Messages May Be Displayed When Updating the Power Management Controller Firmware Using Online Flash Components

Advisory: HP ProLiant Servers - Integrated Lights-Out 2 Virtual Media ISO Image or CD-ROM Drive Is Not Displayed When Attempting to Map Virtual Device on an HP ProLiant Server Running Windows Server 2008 x64 R2

Advisory: HP ProLiant Servers - Power Management Controller Firmware May Not Be Properly Upgraded When Using Certain Flash Update Components

Advisory: HP Server Management Application and Agents Command Line Interface (HPASMCLI) Version 8.25 (Or Earlier) - "Show Server" Command May Incorrectly Display the Cache Level on ProLiant G6-Series Servers Running Linux

Advisory: HP Server Updates Catalog for System Center Configuration Manager (SCCM) 2007 - SCCM Does Not Detect Firmware Versions when Insight Management WBEM Providers Version 2.3.0.0 Is Installed on a Managed ProLiant Server

Advisory: HP Smart Array E200 Or HP Smart Array E200i Firmware Version 1.80 (Or Earlier) - FIRMWARE UPGRADE RECOMMENDED for ProLiant Servers Running Windows Server 2003 To Prevent A Blue Screen And STOP Error Message

Advisory: HP SMS Inventory Tool for HP ProLiant and Integrity Update (ITHU) - ProLiant G6-Series Servers Will Not Be Displayed In Microsoft System Management Server (SMS) Due to a Change In the Manufacturer Name of "Hewlett-Packard" Instead of "HP"

Advisory: HP System Management Homepage (SMH) - Fibre Channel HBA Location Information Intermittently Displayed as "N/A"

Advisory: HP System Management Homepage (SMH) for Windows - SMH Configuration Values Are Not Preserved While Upgrading from Version 3.0.0 or 3.0.1 to Version 3.0.1 or 3.0.2

Advisory: HP System Management Homepage- Memory Subsystem Status Field May Erroneously Display "Uncorrectable LockStep Memory Error" When a Correctable Memory Error Occurs on HP ProLiant G6-Series Servers Running Linux

Advisory: HP Systems Insight Manager (HP SIM) - During the Identification Stage, an Invalid WBEM Event May Be Logged in the HP SIM 5.3 Event Log for Certain Managed Nodes

Advisory: HP Systems Insight Manager (HP SIM) - Foundation Agents Selection in Replicate Agent Settings Is Not Available When the Source Server Is Running HP System Management Homepage 3.x and HP Insight Management Agents 8.30 (or earlier)

Advisory: HP Systems Insight Manager (HP SIM) Version 5.3 - HP SIM Configured with HP Performance Management Pack (PMP) Version 5.0 May Stop Responding

Advisory: HP Systems Insight Manager Version 4.20 SP2 Menus May Not Display or Links May Not Function on ProLiant Servers Running McAfee VirusScan Software

Advisory: HP Virtual Connect (VC) 8Gb 24-Port Fibre Channel (FC) Module - Uplink Port May Become Disabled When N_Port ID Virtualization (NPIV) Capability Is Lost

Advisory: HP Virtual Connect 8Gb 24-Port Fibre Channel Module - ProLiant c-Class Server Blades May Take Up to 25 Seconds To Redistribute Disabled Uplink Port Server Connections

Advisory: Integrated Lights-Out 2 (iLO 2) - Blank Screen Displayed on Integrated Remote Console for HP ProLiant Server with a Video Resolution Setting of 1280 x 1024 and Running SUSE Linux Enterprise Server 11

Advisory: Integrated Lights-Out 2 (iLO 2) - Power Regulator Settings Are Inconsistent Between BIOS RBSU and iLO 2 Power Management Web Page

Advisory: Integrated Lights-Out 2 (iLO 2) Firmware Version 1.70 (Or Earlier) And iLO 2 Management Controller Driver Version 1.9.0 Or 1.11 - ProLiant Server May Unexpectedly Reboot And Display Event ID 57 Error Messages

Advisory: Integrated Lights-Out/Lights-Out 2 (iLO/iLO2) - Connection to a Remote Server With iLO/iLO2 Using Internet Explorer 8 May Cause Internet Explorer 8 to Stop Responding

Advisory: Items at the Bottom of the Screen May Not Be Visible When Using Insight Diagnostics Online Edition for Linux on ProLiant Servers

Advisory: Items in Custom Firmware List in HP Systems Insight Manager 5.0 (or Earlier) Disappear Following Data Collection on ProLiant Servers

Advisory: Linux - HP ProLiant Server running HP OpenIPMI Device Driver for Linux May Log a Communication Error Message After the Server Has Been Idle for an Extended Period of Time

Advisory: Loading HP Insight Diagnostics Offline Edition Version 7.4.0 from the SmartStart Release 7.40 CD on a ProLiant Server May Unexpectedly Stop with `Connection Refused` Message

Advisory: Microsoft Windows Server 2003 Device Manager May Report Resource Conflicts on Certain ProLiant Servers after Changing Serial Port Settings in the System ROM

Advisory: Network Configuration Utility - After VLAN 1 Has Been Disabled Through the Local Area Connection Folder, the Network Configuration Utility May Stop Functioning

Advisory: Onboard Administrator and Virtual Connect Manager - The Link in the Onboard Administrator GUI May Not Always Point to the Active Virtual Connect Module

Advisory: ProLiant and Integrity Servers: Certain SAS Hard Disk Drives - FIRMWARE UPGRADE REQUIRED to Ensure That A Rare Drive Write Cache Issue Does Not Occur

Advisory: ProLiant and Integrity Servers: Smart Array SAS/SATA Controllers - Erroneous "0 /sec" Values Appear Under "Logical Drive" on the System Management Homepage

Advisory: ProLiant BL35p Blade Servers with Internal 4 Port SAS HBA with RAID May Encounter Incomplete Windows Server 2003 Installation Using RDP Version 2.20 or Earlier

Advisory: ProLiant c-Class G6 Server Blades - Certain Server Blades Running Windows Server 2003 Or Windows Server 2008 May Generate a Blue Screen When Loading the Boot From SAN Driver for Fibre Channel (FC) and Qlogic-Based Mezzanine HBAs

Advisory: ProLiant c-Class G6 Server Blades - Windows Server 2003 and Windows Server 2008 Drivers Require Updating to Support Boot From SAN for Fibre Channel (FC) QLogic-based Mezzanine HBAs

Advisory: ProLiant Essentials Vulnerability and Patch Management Pack (VPM) - A Systems Insight Manager 5.3 (HP SIM) and VPM Operating System Version Mismatch Is Discovered on ProLiant Servers and ProLiant Workstations Using SNMP on Windows

Advisory: ProLiant G6 Servers - Certain Servers Running SUSE Linux Enterprise Server 10 SP2 (x86-64) May Encounter "MCE Warning: Using Only 9 Banks" Message When Running dmesg

Advisory: ProLiant G6-Series Server Blades - After Installing an NC325m, NC326m or NC373m Gigabit Server Adapter with Certain Versions of Firmware, a Red Screen with an "Illegal Opcode" Message May Be Displayed and the Server Will Not Boot

Advisory: ProLiant Servers - "WMI: Not Found" Message Appears When Running WBEM Providers for Windows Version 2.4.0.0 and Performing a WMI CIM Studio Query on Certain Tape Provider Classes

Advisory: ProLiant Servers - Upgrading from Windows Server 2008 SP2 to Windows Server 2008 R2 May Cause Information to be Missing on the System Management Homepage When Running Insight Management Agents Version 8.26

Advisory: ProLiant Servers - Virtual Bus Driver (VBD) Version May Not Be Correctly Displayed in Device Manager on Servers Using NC-Series Multifunction 1 Gigabit or 10 Gigabit NICs Even Though The Driver Has Been Updated

Advisory: ProLiant Servers - Windows Network Control Panel Does Not Update the Status of the NIC Team if the Network Cable is Disconnected and then Reconnected

Advisory: ProLiant Servers: SATA Hard Drives - Re-Flashing the Firmware on Certain SATA Hard Drives May Not Succeed

Advisory: ProLiant Servers: Smart Array B110i SATA RAID Controller - DRIVER UPGRADE REQUIRED to Allow S.M.A.R.T. Errors on SATA Drives to Be Reported When Running Embedded SATA RAID Controller Driver Version 6.4.0.xx (Windows) or 1.2.0-14 (Linux)

Advisory: ProLiant Servers: Smart Array B110i SATA RAID Controller - DRIVER UPGRADE REQUIRED to Avoid Loss of RAID 1 Protection for a Two-Drive Boot Volume After Installing hpahcisr Driver RPM Version 1.2.0-14 Under Red Hat Enterprise Linux 5

Advisory: ProLiant Servers: Smart Array B110i SATA RAID Controller - Erroneous Logical Volume I/O Error Messages Reported to the System Event Log When Running Smart Array Embedded SATA RAID Controller Driver Version 6.4.0.xx

Advisory: ProLiant Servers: Smart Array B110i SATA RAID Controller - Kernel Panic May Occur When Installing hpahcisr Driver RPM Version 1.2.0-14 Under Red Hat Enterprise Linux 5 Update 2 or 3

Advisory: ProLiant Servers: Smart Array Controllers - Linux Driver Diskettes for Smart Array Controllers on the SmartStart Release 8.30 CD Should Not Be Used

Advisory: ProLiant Servers: Smart Array P212/P410/P410i/P411/P712m Controllers - FIRMWARE UPGRADE REQUIRED to Prevent Server Unresponsiveness During Periods of High I/O Utilization Under Windows Server 2003/2008 (x86 or x64)

Advisory: ProLiant Servers: Smart Array P212/P410/P411/P712m Controllers - "Configuration Error" Appears if No Battery Is Attached When Selecting "Disable Write-Cache Battery Override" in the Option ROM Configuration for Arrays (ORCA)

Advisory: ProLiant Support Pack (PSP) Version 8.20 - Certain Components May Not Install On ProLiant Severs Running Windows Essential Business Server (EBS) 2008 Or Windows Small Business Server (SBS) 2008

Advisory: Replicating the Management Agent Configuration to `Accept SNMP Packets from any Hosts` in HP Systems Insight Manager to Multiple Target ProLiant Servers Will Not Function

Advisory: Server Migration Pack (SMP) 3.70 (or Earlier) - ProLiant Boot CD May Fail to Detect the Storage Controller on a Destination Server

Advisory: Server Migration Pack (SMP) Version 3.5 Or 3.6 - Virtual to ProLiant (V2P) Or Physical to ProLiant (P2P) Migration May Result In a Blue Screen On a Destination Server Connected to the Storage Area Network (SAN)

Advisory: Server Migration Pack (SMP) Version 3.7 (Or Earlier) - Migrations May Be Unsuccessful And Display the Error "Drivers Could Not Be Injected Into Boot Disk" On a ProLiant Server Running Windows Server 2000/2003/2008

Advisory: Server Migration Pack (SMP) Version 3.7 (Or Earlier) - Mouse and Keyboard May Not Function On a Destination ProLiant c-Class Server Blade When the Source Server Is Running Windows Server 2000, Windows Server 2003 or Windows Server 2008

Advisory: Server Migration Pack 3.70 - CUSTOMER ACTION REQUIRED for VMware ESXi 4.0/VMware ESX 4.0 (vSphere) P2V or V2V Migrations to Complete Successfully Using Server Migration Pack 3.70

Advisory: SLES 11- "i686 No Such File or Directory" Message Will Be Displayed if An Attempt Is Made to Manually Install the hpmouse Driver on ProLiant Servers Running SLES 11

Advisory: Sun Solaris - Unpack 64-bit Miniroot of Solaris 10 10/09 When Adding HP Drivers to Avoid "No Driver Bind" and "No Disks Found" Messages

Advisory: Sun Solaris - Sun Solaris 10 5/09 Will Go Into Maintenance Mode, May Not Display LUNs, or Will Panic and Reboot With Emulex/Qlogic FC HBAs When Enabling I/O Multipathing Using stmsboot Command on HP ProLiant Servers

Advisory: SUSE Linux Enterprise Server 10 - HP NC-Series Intel e1000e Driver for Linux Does Not Automatically Associate With the PCIe NIC on ProLiant Servers Running SUSE Linux Enterprise Server 10 SP1, SP2, or SP3

Advisory: SUSE Linux Enterprise Server 11 - When Loading HP NC-Series Intel e1000e Driver or When Network Is Started, "FATAL: Module '/lib/modules/2.6.27.19-5-default/kernel/drivers/net/e1000e/e1000e.ko' Is Unsupported" Message Displayed

Advisory: System Management Homepage - A Proxy Server Error Occurs When Accessing the Secure Path Manager Webapp Link Using System Management Homepage (SMH) Version 3.x

Advisory: System Management Homepage (SMH) - "Fault Tolerance" Property on the Logical Drives Page Is Incorrectly Displayed as "Unknown" for RAID (1+0) Logical Drive Configurations That Exceed 1 TB

Advisory: System Management Homepage (SMH) - SMH Version 3.0.0 Through 3.0.2 Stops Responding When an Alternative Name Is Set with Mozilla Firefox 3.0

Advisory: System Management Homepage (SMH) 3.0.2 (Japanese Language): System Management Homepage Is Installed in English Instead of Japanese

Advisory: System Management Homepage Version 3.0.1.73 - Online Help Feature May Not Return Search Results

Advisory: Ubuntu Linux Server - Configuration Required for IPMITOOL Management Utility to Function on any HP ProLiant Server With an Integrated Lights-Out 2 (iLO 2) and Running Ubuntu Linux 9.04 Server

Advisory: USB Key Utility - Source Computing Devices Running Windows Server 2008 Server Core Operating System Will Receive the Error Message "oledlg.dll File Was Not Found Reinstalling the Application May Fix the Problem" When the Utility Is Launched

Advisory: Using Rapid Deployment Pack to Simultaneously Install a Boot-from-SAN Configuration to Two Specific ProLiant Blade Servers Located in the Same Sleeve Will Cause the Installation to Halt

Advisory: Version Control Agent (VCA) 2.2.0 - VCA Homepage May Exclude Drivers And Software From the Installed Software and Driver List And Display a False Green/Good Software Status

Advisory: Virtual Connect Manager - Virtual Connect Does Not Correctly Assign Virtual Connect MAC addresses to HP NC364m Quad Port 1GbE BL-c Adapters or NC360m Dual Port 1GbE BL-c Adapters on Some ProLiant and Integrity c-Class Server Blades

Advisory: Virtual Machine Management Pack (VMM) - The VMM Patch Installation May Fail to Complete During the Upgrade Process When Using the Insight Software DVD To Upgrade the Integrated Installer from Version 3.0 to Version 3.10

Advisory: VMware ESX 3.5 Update 1, 2, Or 3 - HP Systems Insight Manager (HP SIM) Version 5.2 Or Version 5.3 May Incorrectly Manage Data and Associations Between the Host Server and Virtual Guests

Advisory: VMware ESX 4.0 - The System Management Homepage (SMH) Does Not Always Populate Management Processor Information When the Host System Is Running VMware ESX 4.0

Advisory: VMware ESX and vCenter 4.0 - When a Server Is Manually Placed Into Standby Mode in vCenter, Monitoring Is Not Turned Off on the Server in HP Systems Insight Manager (HP SIM)

Advisory: VMware ESX Server 3.x - The Message, "You Have Selected IDE Drive That Will Require Special Configuration to Fully Support ESX Server" May Be Displayed Because Virtual Machine File Systems (VMFS) Are Not Supported on IDE Drives

Advisory: VMware ESXi 3.5 U1-4 and ESXi 4.0 - The Onboard Administrator (OA) Does Not Display the OS Server Name as It Appears in iLO/iLO 2 When Running VMware ESXi 3.5 U1-4 or ESXi 4.0 Because There Are No Supported HP Management Providers

Advisory: VMware ESXi 3.5.0 Update 4 - The VMware ESXi CIM Provider Does Not Report the System UUID Correctly in the SMX_ComputerSystem.IdentifyingNumber Field and Does Not Match the UUID Returned by Integrated Lights-Out (iLO)

Advisory: VMware ESXi 3.x and ESXi 4.x - Individual DIMMs Are Not Enumerated by VMware Virtual Infrastructure Client Software When Managing an HP Server with VMware ESXi 3.x or VMware ESXi 4.x

Advisory: VMware ESXi 4.0 - After Upgrading VMware ESXi 4.0 From the HP ESXi 1.0 Offline Bundle to the HP ESXi 1.1 Offline Bundle, HP Systems Insight Manager (HP SIM) Does Not Report Information for the New Feature Sets for "Network" and "SA HBA"

Advisory: VMware Server 1.0.6 - HP Health Agents Do Not Start After Installing VMware Server 1.0.6 on Red Hat Enterprise Linux 4 Update 7 with the ProLiant Support Pack 8.20

Advisory: Windows Server 2008 R2 - Blue Screen Is Displayed After Initial Reboot When Hyper-V Installed on Windows Server 2008 R2

ALT Key May Appear Stuck in NetWare Debugger Screen When Accessed Using Integrated Lights-Out Remote Console

ALT, CTRL, or SHIFT Key May Appear Stuck During An Integrated Lights-Out (iLO) Remote Console Session

Altiris Deployment Server Component May Not Install And No Error Message Will Be Displayed During The Rapid Deployment Pack - Windows Edition 2.00 Autorun Utility Installation Process

Altiris eXpress Deployment Solution Simple Installation Method Does Not Detect An Existing Microsoft SQL Server Installation

An e100 Driver Upgrade Is Needed For A Red Hat Linux 8.0 Professional Installation Via Rapid Deployment Pack Release 1.30

An Extra Line May Be Displayed When Using The Integrated Lights-Out (iLO) Text Remote Console Feature On A ProLiant Server Running Linux

Applet Message May Be Displayed When Creating Or Deleting A Task In Insight Manager 7 SP2 Or SP2.1

Array Configuration Utility (ACU) Installation May Be Missing Web-Enabled Management Software Password

Array Configuration Utility (ACU) Version 6.40 May Display Internet Explorer Security Messages Using the Version of Microsoft Internet Explorer 6.0 Shipping With Microsoft Windows Server 2003

Array Configuration Utility 7.30 Scripting Mode Reports `Invalid RAID` Error when Attempting to Create a Configuration with RAID 1

Array Configuration Utility Is Not Installed During A Linux Scripted Installation Using The ProLiant Essentials Rapid Deployment Pack Release 1.40

Array Configuration Utility May Not Allow Logical Drive Extension to the Maximum Capacity Displayed if the Logical Drive Size is Greater than 261000 MB

Battery Backed Write Cache Enabler Option Kit May Contain A Cable With A Mislabeled Part Number

Blue Screen BugCheck Occurs Intermittently During System Boot Of Japanese Version Of Microsoft Windows 2000 Server

Blue Screen Occurs When Upgrading The Remote Insight Lights-Out II Board Driver For Windows 2000 Version 2.2.0.0

BugCheck Stop 0xD1 May Occur On ProLiant Servers In Emulex Storport Miniport Driver For SAN Storage Systems Running Microsoft Windows Server 2003

Cannot Create USB Device Images Using Integrated Lights-Out (iLO) Virtual Media Create Image Applet Tool on Linux Clients

Case Sensitive User/Login Names Not Currently Supported Using Integrated Lights-Out (iLO) ROM-Based Setup Utility (RBSU)

CD Installation of SUSE LINUX Enterprise Server 8 Using Integrated Lights-Out (iLO) Virtual CD-ROM May Not Complete Resulting In the Error `Please make sure that CD number 1 is in your drive!`

Certain HP KVM Server Console and IP Console Switches May Exhibit Flickering, Flashing or Blank Video

Certain HP Modular Power Distribution Units (mPDU) Power Strips May Not Power On Or Power Off Properly

Certain ProLiant BL p-Class GbE2 Interconnect Switches May Not Have The Correct Serial Number Embedded Into The EEPROM Memory

Certain ProLiant p-Class Server Blades May Blue Screen (Stop 0x7B) When Booting To Windows 2003 Installation CD Or Windows Preinstallation Environment (WinPE) CD

Certain ProLiant Servers with 64-Bit Enabled Processors May Intermittently ABEND During Startup of NetWare 6.5 SP3 When Loading CPQASM.NLM

Changing Speed/Duplex on Dual Switch-Assisted Load Balancing (Dual SLB) NIC Teams Causes Stop D1 Blue Screen in CPQTEAM.SYS

Cisco Gigabit Ethernet Switch Module (CGESM) For HP BladeSystem p-Class Server Blades Displays MAC Address Table Count As 8200 Instead Of 8192

Cisco Gigabit Ethernet Switch Module (CGESM) For HP BladeSystem p-Class Server Blades May Stop Responding If The Setup Program Is Left Unattended For A Long Period Of Time

Clearing All Thresholds from HP Management Agent Control Panel Applet May Not Clear Thresholds Under Performance on System Management Homepage

Compaq Insight Manager (Win32) Will Not Receive Storage Trap Alerts From Insight Management Agents Version 6.40

Compaq System Configuration Utility Falsely Reported As Installed Or Available Software By Insight Management Agents, Version Control Agent (VCA) , And Version Control Repository Manager (VCRM)

Component Packs Containing Two Drivers Do Not Display Both Drivers In Version Control Agent (VCA) Page

Computer Configuration Properties Window Defaults to Static IP Address Settings when the Managed Server Received IP Address Via DHCP with SUSE LINUX Enterprise Server 9 (x86/AMD64/EM64T)

Concurrent Directory Login Limit In Integrated Lights-Out (iLO)

Configuring Security Policies To Run OpenSSH In Microsoft Windows Server 2003 For Use With ProLiant Essentials Vulnerability And Patch Management Pack (VPM) Release 1.0

Connecting A Second Integrated Lights-Out (iLO) Virtual Media Applet May Interfere With The First Applet

CPQSETUP.LOG Does Not Record Windows Smart Component Installation Results If Components Are Installed Using An Account That Does Not Have Administrator Privileges

CPU Speed Information from /proc/cpuinfo is Incorrect with SUSE LINUX Enterprise Server 9 (x86) SP1 or SP2 when AMD PowerNow is Enabled

Cursor Moves Two Lines At A Time When Selecting A Command Prompt Boot Option In An Integrated-Lights Out (iLO) Remote Console Session

Custom Adlagent Configuration File Is Not Installed Properly During A Scripted Installation Of VMware ESX Server 2.5 By Rapid Deployment Pack - Windows Edition 2.00

CUSTOMER ACTION REQUIRED: Use HDDETECT Utility To Identify Certain Ultra320 Hard Drives Susceptible To An Unsuccessful Write Operation Occurring During Extreme Disk Intensive I/O Operations

CUSTOMER ATTENTION REQUIRED: Incorrectly Upgrading Insight Manager 7 To Insight Manager 7 SP2 In A Microsoft Cluster Server Configuration May Damage The IM7 Database

Customized System List May Display Incorrect (Older) Agent Versions on HP Systems Insight Manager Version 4.2 SP2

Data Execution Prevention (DEP) Feature In Windows Server 2003 SP1 RC1 Causes The HP Insight Management Agents And The HP ProLiant Rack Infrastructure Service To Stop Running

Deployment Server Console In Rapid Deployment Pack - Windows Edition 2.00 Displays A Connected Icon For A Managed VMware ESX Server Even When The Server Is Power-Cycled or Powered Down

Device Drivers May Not Load When Using The /3GB Switch On ProLiant Servers Running Microsoft Windows Server 2003

Diskette Media Errors May Cause Integrated Lights-Out (iLO) And Remote Insight Lights-Out Edition II (RILOE II) Virtual Floppy Applet To Become Unresponsive

Driver Update Required For Windows Server 2003 And NetFlex/Netelligent NIC Compatibility

Duplicate Enclosure Entries On The iLO Rack Topology Page With ProLiant BL p-Class Server Blade

Empty Groups in IGMP Data Forwarding Table May Not Be Reinstated when VLAN on Data Server Port of ProLiant BL p-Class GbE2 Interconnect Switch is Reassigned

Enabling Anonymous Access In HP Web-enabled Management Software Security Vulnerability (Reference SSRT4679)

Error Code `(0x4, 0x1, 0, 0)` Encountered During The Windows 2000 Setup Process On ProLiant Servers

Error Message Documentation For bcm5700 Driver Is Missing In The Manual Page For Linux

Error Message When Running Example Configuration Scripts In Version 2.0.0 Of The ProLiant BL p-Class And The ProLiant e-Class GbE Interconnect Switch Management Utilities For Both Windows And Linux

ESX Service Console May Stop Responding After Installing HP Insight Management Agents On VMware ESX Server 2.5

Event ID 258 May Be Logged In Microsoft Windows 2000 Event Log When Using NIC Team

Failure To Reconnect To The Deployment Server If ``Configure Computer`` Task Is Assigned Through The Event Creation Interface

False Error Message Displayed on HP Rack and Power Manager when Shutdown/Restart Dates Span the End of the Year

Fibre Channel Storage Agent Logs `Event ID 4099` Message

FIRMWARE UPGRADE RECOMMENDED On Certain SCSI Hard Drive Models

FIRMWARE UPGRADE RECOMMENDED: Potential SSL Master Key Buffer Overflow Security Vulnerability In iLO And RILOE (Ref. Security Bulletin SRB0043W / SSRT2310c)

FIRMWARE UPGRADE REQUIRED: Smart Array 6i, 641/642, and 6402/6404 Controllers Running Firmware Version Earlier Than Version 2.48 May Report Battery Failure

Forwarding Database Information Page For The HP ProLiant BL p-Class GbE2 Interconnect Switch May Display Incomplete Or Inaccurate Information When Viewed Through The Browser-Based Interface (BBI)

Forwarding Database Search Does Not Display Trunk Ports On HP ProLiant BL p-Class GbE2 Interconnect Switch Unless Using Default Search Criteria Within The Browser-Based Interface (BBI)

Foundation Agents from HP Management Agents Version 7.40 (or earlier) Log Only the First Disk Threshold Event

GUI-Based SuSE Linux Enterprise Server 7 Updates May Abort

Health Driver Installation Fails With `Unresolved Symbol` On ProLiant Servers Running Linux

High CPU Utilization May Occur In HP Systems Insight Manager (HP SIM) When Attempting To Edit User Created System Lists

High CPU Utilization Using HP Storage Agents Under HP System Health Application and Insight Management Agents for Red Hat Enterprise Linux 2.1, Red Hat Enterprise Linux 3 (x86), or UnitedLinux 1.0

HP Advanced System Management (ASM) Software Does Not Load Or May Stop Running On Intel Xeon 800 MHz FSB ProLiant Servers With Certain Processor Steppings

HP BladeSystem p-Class Power Enclosure Management Module Does Not Properly Identify AC Redundancy in the HP BladeSystem p-Class Server Blade Enclosure with Enhanced Backplane

HP Hot-Plug Memory Configuration Utility Will Display `Either The System BIOS Or The Advanced System Management Controller Driver Does Not Support Hot-Plug Memory` Message On Unsupported Servers

HP Management Agents May Display Numerous Security Messages Using The Version Of Microsoft Internet Explorer 6.0 Shipping With Microsoft Windows Server 2003

HP Management CD Release 6.10 Help File Links Do Not Work On Linux Operating Systems

HP Online Flash Component for Windows - HP Integrated Lights-Out May Not Run if Data Execution Prevention (DEP) Enabled in Microsoft Windows Server 2003 Service Pack 1

HP OpenView Network Node Manager 7.01 May Prevent Insight Management Agents From Communicating Via SNMP

HP Power Manager 3.0 May Not Shut Down A Managed Server On A UPS Low-Battery Event

HP ProLiant Advanced Server Management Driver (Health Driver) Fails To Install On Red Hat Linux 7.3 Professional With A Certain Errata Kernel

HP ProLiant BL p-Class GbE2 Interconnect Switch Loses bootp Supplied IP Address When Using TFTP-Get Config Button From The Browser-Based Interface

HP ProLiant BL p-Class GbE2 Interconnect Switch SAN LED Will Not Illuminate Properly If The Switch Is Running Firmware Version 1.0.0

HP ProLiant Server Configured With Two AMD Opteron 200 Processors And Running Microsoft Windows Server 2003 May Stop Responding During Startup Or Shutdown

HP ProLiant Support Pack for SUSE LINUX Enterprise Server 9 Version 7.30 Does Not Correctly Reinstall and Rebuild Components for Later Version Errata Kernels if RPMs Installed Under Original Kernel

HP Smart Array Device Manager Extension Does Not Detect HP Array Configuration Utility on ProLiant Server Running Microsoft Windows Server 2003 x64 Editions

HP StorageWorks SAN Switch (B-Series) Generates ENC_OUT Errors when Connected to an HP BladeSystem p-Class Enclosure Through an OctalFC Interconnect Module

HP System Management Homepage Fails to Display Agents Information

HP System Management Homepage For An HP Storage Management Appliance Cannot Be Launched From HP Systems Insight Manager Tools Menu

HP System Management Homepage May Not Install from ProLiant Support Pack 7.20 if Domain Username Contains Special Characters

HP System Management Homepage May Not Load After Using HP Version Control Agent For Linux Version 2.0.7 To Install the HP ProLiant Support Pack For Linux Version 7.20 (Or Later)

HP System Management Homepage Version 2.0 May Appear Blank On Microsoft Windows Server 2000/2003 (Japanese Editions)

HP System Management Homepage Version 2.1.2 Processes May Continue Running After Service Stopped

HP Systems Insight Manager (HP SIM) 4.2 Intermittently Generates an Event Storm for Previous Events

HP Systems Insight Manager (HP SIM) 4.2 Software Deployments Will Fail when Multiple Targets are Selected

HP Systems Insight Manager (HPSIM) Inventory Report Product Name Field Is Blank Using `Export To File In CSV Format`

HP Systems Insight Manager (HPSIM) Login Disabled After Installing Microsoft MS04-025: Cumulative Security Update for Internet Explorer (867801)

HP Systems Insight Manager (SIM) 4.2 SP2 Does Not Always Display an Accurate Software Status in the SW Column

HP Systems Insight Manager 4.2 May Record Repeated Error Messages in MX.LOG if Custom Commands Run with the Run Now Button Then Deleted

HP Systems Insight Manager 4.2 SP2 Automatic Event Handling Tasks May Stop Running

HP Systems Insight Manager 4.x - Windows Network Interface Report Does Not Return Duplex and Speed Settings for Most Managed Servers

HP Systems Insight Manager And HP System Management Homepage Do Not Function Properly After Upgrade To Microsoft Windows XP SP2

HP Systems Insight Manager Automatic Event Handling Task - Intermittent Email / Pager Message Storm

HP Systems Insight Manager Message When Editing AEH Task With More Than 100 Criteria

HP Systems Insight Manager Session Lasting More Than One Day May Become Unexpectedly Disconnected If Client Computer Is Running Sun Microsystems Java Plug-in Version 1.4.1_04

HP Tested and Approved Linux Bonding Driver May Report Erroneous Up/Down Status Messages In /var/log/messages On e1000 Drivers

iLO Firmware Version 1.06 (Or Earlier) Does Not Support Headless Server Mode

iLO Firmware Versions 1.02 And 1.06 Do Not Automatically Disable iLO When RILOE II Is Installed

iLO May Send Invalid DHCPREQUEST Packets To The DHCP Server During The IP Address Renewal Phase

iLO Pass-Through Service for Microsoft Windows Terminal Services May Stop Functioning after Restart in a Microsoft Windows Server 2003 Service Pack 1 Environment

iLO Remote Console May Turn Gray After Being Resized From A Linux Client

iLO Remote Console Sessions May Become Unresponsive If Restarting A Session After The Previous Session Has Timed Out When Configured With iLO Firmware Version 1.64 (Or Earlier)

iLO With Firmware Version 1.40 May Be Undiscoverable By DNS Servers On Networks Using DDNS

Inability To Use Administrator Account In Version Control Agent Or Version Control Repository Manager

Incomplete Data Is Displayed When Using The Integrated Lights-Out (iLO) Virtual Serial Port Console On A Server Running SUSE LINUX Enterprise Server 9

Incorrect Boot Partition Size May Occur On Microsoft Windows 2000 Server If Very Large Partition Size (Greater Than Approximately 200 GB) Used During Unattended or SmartStart Assisted Installation

Incorrect Memory Count Reported and Certain Fields Report Fewer Characters or a Zero for the Memory Count Using snmpwalk Command Under SUSE LINUX Enterprise Server 9 (x86/AMD64/EM64T) Reports

Incorrect Rack Diagrams May Be Displayed If No Management Processor Is Discovered From Rack

Incorrect Security Browser Settings Are Displayed When Using SmartStart Release 7.20 With Assisted Installation Of Microsoft Windows Server 2003

Insight Management Agents 7.10 Event Notifier Configuration Wizard May Cause Application Error After Closing Event Selection Dialog Box

Insight Management Agents And Web-Enabled Management Login Session Remains Active For 15 Minutes If The Browser Is Closed Without Logging Out

Insight Management Agents for Linux Version 6.40 Do Not Report Hard Drive Status Correctly To Insight Manager 7

Insight Management Agents For VMware ESX Server 2.5 Cannot Detect Or Monitor Modular Smart Array 1000 (MSA 1000) Or Modular Smart Array 1500 (MSA 1500)

Insight Management Storage Agent For Windows May Generate An Event ID 1192 During A SCSI Tape Backup

Insight Manager 7 And Insight Manager XE May Only Provide The IP Address In Forwarded Events For Device Sending SNMP Trap

Insight Manager 7 Information Represented Via Link `Compaq Subsystem Status Information (Using SNMP)` May Be Outdated Or Non-Existent

Insight Manager 7 May Not Identify ProLiant Servers Running Microsoft Windows Server 2003 As Server Devices

Insight Manager 7 Pager Status Log Message - `Error: TAP Message Block Rejected By Pager Service`

Insight Manager 7 SP1.1 May Not Properly Forward SNMP Trap Information

Insight Manager For CA Unicenter, HP OpenView NNM, Microsoft Operation Manager, Tivoli Enterprise, And Tivoli NetView May Not Receive Storage Traps From Insight Management Agents 6.40

Installation May Not Complete Using the Version Control Repository Manager or Remote Deployment Utility With IP Restricted Logins When Preconfiguring the System Management Homepage (SMH) Component

Installation Of SUSE LINUX Enterprise Server 9 (x86) Or SUSE LINUX On ProLiant BL30p Or ProLiant BL35p Server Blade Will Stop Responding If ReiserFS (Default File System) Or Ext3 File System Is Chosen

Installing Citrix MetaFrame XP Or MetaFrame 1.8 In Windows 2000 Environment Causes Blue Screen With Integrated Lights-Out

Installing The HP ProLiant Support Pack for Microsoft Windows 2003 x64 Editions May Generate A Windows Digital Signature Verification/Logo Testing Dialog Box

Integrated Lights-Out (iLO) And Remote Insight Lights-Out Edition II (RILOE II) Telnet Sessions Use The Same Hot Keys Defined For Remote Console Session

Integrated Lights-Out (iLO) Does Not Properly Respond To PING Packets From Load-Balanced NICs

Integrated Lights-Out (iLO) Firmware Version 1.75 Power Regulator Options are Incorrectly Displayed as Available on AMD Opteron Servers With Certain System ROMs

Integrated Lights-Out (iLO) Login Fails If Client On Same Domain Has Cookies Over 512 Bytes In Size

Integrated Lights-Out (iLO) May Appear Failed on HP System Management Homepage if iLO Was Unplugged from the Network or Has No IP Address

Integrated Lights-Out (iLO) May Falsely Report Remote Console As Unavailable

Integrated Lights-Out (iLO) or Remote Insight Lights-Out Edition II (RILOE II) Idle Session Timeouts May Be Pre-empted by Microsoft Active Directory Service

Integrated Lights-Out (iLO) Performance Degrades During Login And While Running Directory Settings Tests

Integrated Lights-Out (iLO) Rack View Usage Statistics Display Incorrect Maximum Power Output Value for BladeSystem pClass 1U Power Enclosure

Integrated Lights-Out (iLO) Remote Console Displays Error Messages When Running Java (TM) 2 Runtime Environment Version 1.4.0 Or Version 1.4.0_01

Integrated Lights-Out (iLO) Remote Console May Not Display Border Characters Correctly In Red Hat Linux

Integrated Lights-Out (iLO) Remote Console May Not Open When Selecting `No` In Response To Hostname Mismatch Certificate Alert Message

Integrated Lights-Out (iLO) Remote Console May Open With Black Screen And Blinking Cursor

Integrated Lights-Out (iLO) Remote Console Session May Generate Spurious Mouse Selects In Linux Text Window

Integrated Lights-Out (iLO) Remote Console Session May Stop Responding After Surveyor Service Starts

Integrated Lights-Out (iLO) Remote Console Session On A ProLiant BL20p Server Blade Through The Diagnostic Port Does Not Self-Terminate When The Cable Is Disconnected

Integrated Lights-Out (iLO) Remote Console Unavailable When New Remote Console Session Is Opened Immediately After Previous Session Is Closed

Integrated Lights-Out (iLO) Secure Shell (SSH) Feature May Cause Other iLO Features To Be Slow Or Inoperable

Integrated Lights-Out (iLO) Users Cannot Authenticate On Directory Services When `Register With DDNS Server` Option Is Disabled In iLO Network Settings

Integrated Lights-Out (iLO) Virtual Media Applet Error Message `Can`t open file... (error = 32)`

Integrated Lights-Out (iLO) Virtual Media Does Not List USB Diskette Drives or USB Drive Keys as Local Media Drives

Integrated Lights-Out (iLO) Virtual Media Java Applet Cannot Access the Local CD-ROM Drive in a Microsoft Windows Environment When the User Account Is Not a Member of the Local Administrator Group

Integrated Lights-Out (iLO) Virtual Media Rejects Valid Images After Inserting an Invalid Image Using CLP or XML Interface

Integrated Lights-Out (iLO) Virtual Media USB Drive Key Will Not Boot to DOS

Integrated Lights-Out (iLO) Web Agent Homepage May Display Incorrect NIC Speed

Integrated Lights-Out (iLO) Web Server Connectivity May Temporarily Be Lost

Integrated Lights-Out (iLO) with Firmware Version 1.80 Resets if Incorrect Virtual Medial (VM) Image is Inserted with Deprecated CLI `vm - insert` Command

Integrated Lights-Out Event Log Time May Not Synchronize With Linux Operating System

Integrated Lights-Out View Of Integrated Management Log (IML) May Not Synchronize With Management Agents IML Viewed Through Insight Manager 7

Integrated Lights-Out Web Page Data Fields May Not Save Correctly If The Page Is Saved Prior To The Page Being Fully Loaded

Intermittent Blue Screen With STOP 0x4E Running Integrated Lights-Out (iLO) Management Interface Driver For Windows Version 1.4.0.0 C Or Version 1.4.0.0 D

Internet Explorer Application Error May Occur When Array Configuration Utility (ACU) Version 6.40 Is Running In ``Local Application Mode`` In A Windows 2000 Server Or Windows Server 2003 Environment

Invalid Password In HP Lights-Out XML PERL Scripting Sample For Linux May Delete Integrated Lights-Out (iLO) User List

IP Addresses For Multiple NICs May Be Associated With The Same Hostname In /etc/hosts File With SuSE Linux Enterprise Server 7

IRQ Sharing May Impact Performance of ProLiant Servers after Upgrading to VMware ESX Server 2.x

Job Scheduler in ProLiant Essentials Rapid Deployment Pack - Linux Edition 1.20 May Not Execute Scheduled Jobs

Linux Bonding Driver May Not Enslave Network Interfaces If Multiple Network Drivers Are Loaded

Linux Deployment Utility Version 1.0.7-7 Automatic Eject/Reboot Option does not Function on ProLiant Servers Installing Linux ProLiant Support Pack Version 7.30 or 7.40 for Red Hat Enterprise Linux 4

LINUX DRIVER UPDATE REQUIRED: ProLiant BL20p Server Blade Running Red Hat Linux Advanced Server 2.1, Red Hat Linux 7.3, Or SuSE Linux Enterprise Server 7 Requires Driver Updates

Local Client Diskette Drive Operations Should Not Be Performed While The Drive Is Assigned As An Integrated Lights-Out (iLO) Virtual Floppy Drive

Local Security Policies Are Renamed And Become Invalid After Running Altiris SIDgen.EXE During Setup On ProLiant Servers

Lockup Or An Error May Occur During File Copy When Running A SmartStart Scripting Toolkit Unattended Installation With NC7770, NC7780, And NC7781 Gigabit Server Adapters

Logging Into Insight Manager 7 After Installation Using A System Running Microsoft Windows XP Professional

Logical Drive Syntax Error Generated by HP ProLiant Array Configuration Utility Command Line Interface (HPACUCLI) when Specifying `drives=all` Parameter

Login May Be Required When Deploying HP System Management Homepage for Windows Version 2.1.0.121 from HP Systems Insight Manager 4.x

Login to HP ProLiant Essentials Virtual Machine Management Pack Plug-In for HP Systems Insight Manager 4.x Does Not Succeed if User Name Contains Non-Alphanumeric Character

Logon Access may not be Successful When Two Users Attempt to Access Integrated Lights-Out (iLO) Remote Console Simultaneously

Managed SLES 9 SP1 Server May Be Unable To Determine The Fully Qualified Server Domain Name When Changing The Host Name With The Rapid Deployment Pack - Windows Edition 2.00

Management Agent Name Is Displayed Four Times In The Version Control Agent Catalog

Microsoft Windows 2000 Guest OS (Virtual Machine) on VMware ESX Server Does Not Start When ESX Server Is Running on ProLiant Servers that Include Certain Intel Processors

Microsoft Windows 2000 May Blue Screen With A Stop 0x7F Message When Using NC77XX And NC67XX Series Network Controllers

Microsoft Windows Bugcheck Event Will Not be Written to the Integrated Management Log (IML) when Using Certain Versions of the CPQASM2.SYS Driver

Microsoft Windows Server 2003 May Not Boot When EMS Console Support Is Set To Remote And Integrated Lights-Out (iLO) Is Disabled

Microsoft Windows Server 2003 Service Pack 1 (SP1) Will Not Install Properly On ProLiant Essentials Vulnerability And Patch Management (VPM) Server

Microsoft WINNT.EXE Installation Utility Can Run Out Of Memory When Using Rapid Deployment Pack Version 1.20 To Deploy Microsoft Windows 2000

Migrating Custom Events Based On Windows 2000 Scripted Install Events From The Rapid Deployment Pack 1.0 And 1.10 To The Rapid Deployment Pack 1.20

MPINET32.CAT File Reference Must Be Changed In The TXTSETUP.OEM Sample Files Used With Windows Server 2003 Installations Using The SmartStart Scripting Toolkit

Multiple Entries Of Insight Manager 7 Server Displayed In Device List

NC31XX Fast Ethernet Adapters Using The ProLiant Network And Configuration Utility In Windows 2000 May Receive A `InitAdapterError` Message Running Diagnostics

NET-SNMP snmpd Process May Consume Excessive CPU Time With Red Hat Linux 8.0

NetWare 5.1 May Become Unresponsive Under Heavy I/O When Running CPQMPK.PSM Or MPS14.PSM On A ProLiant DL360 G4, DL380 G4, ML350 G4, ML370 G4, Or BL20p G3 Server

Network Installation Of Red Hat Linux Advanced Server 2.1 May Fail Using iLO Virtual Floppy Drive With ProLiant Servers

NIC Agents For Windows Version 5.50.0.0 Does Not Display Teamed NICs In Insight Manager 7 Or Insight Manager (Win 32)

NIC Teams Cannot Be Created On A Windows 2000 Server With Terminal Services Running

Non-Visible Characters In The Integrated Lights-Out (iLO) Command Line Protocol (CLP) Output May Cause Display Discrepancies If Another Scripting Tool Is Used Interactively With CLP

Offline Utilities May Not Start Properly On Systems Using SmartStart 6.30 (Or Later) If The Application Is Started Immediately After Closing Another Utility

Online ROM Flash User Guide Links Broken For All Languages Except English On SmartStart Release 6.20 CD Under Linux

OpenSSH Client Unable to Connect to HP Systems Insight Manager Server when using MXAGENTCONFIG Utility

Patches are Removed After Reinstallation of the ProLiant Essentials Vulnerability and Patch Management Pack

Performance Management Pack (PMP) Database Does Not Allow Manual Log Purge or Reports Via HP Systems Insight Manager if PMP Database is 7 GB or Larger

Performing Hardware Configuration Using Kudzu During Server Boot is not Successful when Using CTRL+ALT+F7 Virtual Graphical Console

POST Message `Integrated Lights-Out Is Disabled` After RILOE II Is Removed From A ProLiant Server With iLO

POST Message `keyboard not present` May Be Displayed If The Integrated Lights-Out (iLO) Is Configured To Use DHCP And The NIC Is Unplugged

Power Regulator (Power Governor) Feature Does Not Function Correctly When Configured Using iLO With Firmware Version 1.70

Preconfiguring HP Systems Management Homepage Component Through Version Control Repository Manager Before Deployment May Require Manual Copy Of Trusted Certificates

Pressing ``CTRL+BREAK`` Does Not Stop Server Diagnostics Continuous Looping Mode On ProLiant BL20p Server Blade

Previous Management Agent Trap Events May Be Resent To Insight Manager

Previous Version Of HP Insight Diagnostics Is Not Removed When Upgrading To HP Insight Diagnostics Version 7.0.0.1198

ProLiant BL C-GbE And F-GbE Interconnect Switches (p-Class and e-Class) Support Mono-Spanning Tree Protocol (IEEE 802.1D), But Multiple Spanning Tree Domains (IEEE 802.1s) Are Not Supported

ProLiant BL e-Class And ProLiant BL p-Class C-GbE Interconnect Switch Link Failure May Occur With Forced Speed/Duplex Settings On Uplink Ports

ProLiant BL e-CLass and ProLiant BL p-Class Server May Not Be Properly Renamed After Imaging And Becomes Inaccessible From The Network When Using Rapid Deployment Pack

ProLiant BL p-Class Management Module Firmware Update May Not be Successful

ProLiant BL20p G3 Server Blade and ProLiant ML350 G4 Server may Stop Responding when the MPS Table Mode is Set to Disabled in the RBSU

ProLiant BL20p Server Blades Containing Integrated Lights-Out May Not Power Down

ProLiant BL30p or BL35p Server Blade May Not Boot If Using Optional QLogic Fibre Channel Adapter

ProLiant BL35p Server Blade Configured With The Dual-Port Fibre Channel Adapter Will Stop Responding During POST Under Certain Conditions

ProLiant BL45p Blade Server Configured with an AMD Opteron 200 Series Processor Will Not Boot

ProLiant BL45p Blade Server Running Microsoft Windows Server 2003 x64 Editions Does Not Properly Monitor all Fans and Temperature Sensors

ProLiant Essentials Intelligent Networking Pack License Errors May Occur on HP ProLiant Blade Servers Running the Network Controller Drivers Ethernet (NCDE) Version 8.0

ProLiant Essentials Intelligent Networking Pack License Errors May Occur On ProLiant Servers Running in a Microsoft Windows Server 2003 (SP1) or Microsoft Windows Server 2003 x64 Editions Environment

ProLiant Essentials Rapid Deployment Pack - Linux Edition Web Console may not be Accessible

ProLiant Essentials Rapid Deployment Pack - Windows Edition 1.60 Jobs Do Not Complete with a Linux Target Running HP System Management Driver 7.1.1-xx

ProLiant Essentials Rapid Deployment Pack - Windows Edition 2.00 and 2.10 Do Not Properly Set the Agent Transport Setting to TCP/IP on Managed Linux or VMware Servers

ProLiant Essentials Vulnerability and Patch Management Pack (VPM) Displays Task Execution Error in the HP SIM Task Result Window

ProLiant Essentials Vulnerability And Patch Management Pack (VPM) Does Not Function After Altiris Notification Server 6.0 Is Installed On The Same System

ProLiant Essentials Vulnerability And Patch Management Pack Installation May Not Complete While Installing RMS

ProLiant ML/DL Scripted Install For Microsoft Windows 2003 Event Fails After Upgrading From Rapid Deployment Pack Release 1.30 To Rapid Deployment Pack Release 1.31

ProLiant Server Running NetWare 6.5 SP2 Overlay May ABEND While Upgrading To ProLiant Support Pack For NetWare Version 7.10

ProLiant Server Running Windows 2000 Server May Blue Screen With An ``E3 RESOURCE_NOT_OWNED`` Message

ProLiant Servers Receiving An Installation Of Microsoft Windows Server 2003 Using The UNATTEND.TXT File With The `OEMPreinstall` Flag May Generate An Error

ProLiant Servers Running The iLO Advanced And Enhanced System Management Controller Driver (CPQASM2.SYS) May Stop Responding During An Upgrade From Windows 2000 To Windows Server 2003

ProLiant Servers That Use Active Directory Or eDirectory With A Blank Password May Be Prevented From Logging Into RILOE, RILOE II, Or iLO

ProLiant Servers With iLO Firmware Version 1.15 - 1.40 Do Not Support Hot Plug PS/2 Keyboard Functionality

ProLiant Support Pack Download Pages On The SmartStart Release 6.20 CD Do Not Display Properly With Linux And Netscape Navigator 4.79

ProLiant Support Pack Or Smart Component Installation May Not Start Correctly When Initiated From The Version Control Agent (VCA) Home Page

ProLiant Support Packs Version 7.11 For Linux Must Be Manually Copied Into The Version Control Repository Manager Instead Of Uploaded

Rapid Deployment Pack - Windows Edition 2.00 May Not Complete A Reboot Task On A Managed Server Running VMware ESX Server

Rapid Deployment Pack - Windows Edition 2.00 Scripted Install Jobs May Stop When Using Microsoft Windows Server 2003 SP1

Rapid Deployment Pack (RDP) - Windows Edition 2.00 Displays The Name Property For A Managed VMware ESX Server As `Untested/Unidentified`

Rapid Deployment Pack 1.20 Downloadable ISO Image Contains Invalid Directory Name

Rapid Deployment Pack Capture Of Windows Image Fails With Message `FIRM Error 1294592`

Rapid Deployment Pack Tasks That Reset A NIC During Execution Cause Incomplete Or Failed Task Status In The AClient

Recommended Mouse Settings When Using The Remote Insight Lights-Out Edition II (RILOE II) Remote Console With SuSE Linux Enterprise Server 7

Recommended Mouse Settings When Using The Remote Insight Lights-Out Edition II (RILOE II) Remote Console With SuSE Linux Enterprise Server 8

Red Hat Enterprise Linux 3 And Red Hat Enterprise Linux 2.1 Report Errors When Enslaving Bond (Teamed) Interfaces

Red Hat Enterprise Linux 3 Update 4 (AMD64/EM64T) Installation to HP 6-Port SATA RAID Controller Stops Responding While Formatting /dev/sda

Red Hat Enterprise Linux 4 (x86)/(AMD64/EM64T) Mouse May No Longer Be Visible After Connecting To The Integrated Lights-Out (iLO) Virtual Media

Red Hat Linux 8.0 Professional Image Capture Via Rapid Deployment Pack 1.30 Displays A Console Message But Does Not Impact Functionality

Remote Console May Not Function After Upgrading RILOE II Firmware From Version 1.01 To Version 1.12 (Or Later)

Remote Insight Information Sub-Agent Moved From Active To Inactive During ProLiant Support Pack (PSP) Installation

Remote Insight Lights-Out Edition II (RILOE II) Diagnostic Functions In HP Insight Diagnostics Version 7.0.0.1198 Are Disabled If Certain ProLiant Support Packs Are Installed

Replicating Agent Settings or Manually Changing Settings in System Management Homepage Version 2.0.2 will not be Permanent if SMH was Upgraded from Version 2.0

Routers Using `UDP Helpers` May Not Propagate DHCP Packets From Integrated Lights-Out (iLO) When The iLO Name Is Less Than 13 Characters

Runtime Error Reported When Opening A Previously Configured Compaq Version Control Agent In The Compaq Component Configuration Tool From The Compaq Support Paq For Windows

Search Functionality In Help File Of Insight Management NIC Agent Does Not Work And Search Functionality For Other Components Is Not Present

Sending Traps from HP Systems Insight Manager 4.2 SP2 - Windows to the HP Network Node Manager Version 7.5 / HP-UX May Cause the Web-Based Alarm Browser to Stop Responding

Server Diagnostics Version S11.03A Does Not Display Diskette Errors In The Log Status / View Details Window

Server Diagnostics Version S11.03A Tests Only One CD-ROM Drive Or DVD-ROM Drive In A Server

Server Hardware Information Not Sent By Web Agent Under Microsoft Windows .NET Server 2003

Server Performance Status Displays As Critical (Red) In Insight Manager 7 (IM7) After Upgrade To Insight Management Agents 7.10

SERVER.EXE May Not Load Automatically During Server Boot After SmartStart Release 7.30 Assisted Path Installation of NetWare 6.5 or NetWare 5.1

SmartStart Release 6.40 to Release 7.30 Will Not Boot on Systems with Greater Than 32 Gigabytes of RAM

SmartStart Release 7.20 Insight Management Agents May Not Populate System Management Homepage (SMH) If The Agents Are Installed Without Other SMH Web Applications

SmartStart Scripting Toolkit Virtual Floppy Utility (VFLOP.EXE) Does Not Work With USB-Based Virtual Floppy Ability On Integrated Lights-Out (iLO)

SNMPWalk Command with HP MIB Under Red Hat Enterprise Linux 3 (x86) or Red Hat Enterprise Linux 3 (AMD64/EM64T) Displays Incorrect System Memory and Swap Drive Size

Some Features Of Insight Manager 7 May Not Function Correctly When Using Certain Gigabit Ethernet Adapters Without A Driver Update

Some ProLiant Servers Do Not Allow Microsoft Windows NT Server 4.0, Windows 2000, Or Any Edition Of Windows Server 2003 To Display Dates Prior To The Year 2000

Starting A Remote Console Session Using The Integrated Lights-Out Web Interface May Result In A Blank Screen

Status Of Folders Under `My Favorites` On HP Systems Insight Manager (HP SIM) `System Lists` Panel May Not Match Status Of Items On `All Systems` Panel

Storage Agents For Linux Fail To Install On ProLiant Server Running Red Hat Linux 8.0 Professional

Storage Traps May Not Be Received In Insight Manager 7, HP OpenView, Or Other Management Applications After Installing Insight Management Agents Version 6.40

StorageWorks MSA500 G1, MSA500 G2, and MSA1000 Enclosures Not Configured to Use 100 Percent Write Cache May Have Stale Read Cache Data

Support Pack Installations Under Windows NT Server 4.0 Will Not Complete Successfully If A Component Times Out During Installation

Survey Utility For Windows Will Terminate Unexpectedly With Application Exception Message On ProLiant Servers Attached To 40 (Or More) Hard Drives

SUSE LINUX Enterprise Server 8 (AMD64 and x86) SP3 And SP4 Installations Will Cause The Mouse To Stop Responding On ProLiant Servers When iLO Is Disabled

SUSE LINUX Enterprise Server 9 (x86)/(AMD64/EM64T) Installation May Take Three to Four Hours on ProLiant BL20p G3 Server Blade Using iLO Virtual Media

Switch-Assisted Load Balancing (SLB) NIC Teams Configured With Network Configuration Utility For Windows Version 7.85 May Experience Network Connectivity Faults

SYS.COM Is Not An ``Optional`` Component During Installation of Rapid Deployment Pack If Linux Scripted Installation Events Are To Be Run

System Clock May Report Inaccurate Time when Upgrading the System ROM on ProLiant Servers with the AMD Opteron Processor AMD PowerNow! Feature

System Management Homepage (SMH) may Grant Access Rights of Local OS Groups to Domain OS Groups with the Same Group Name

System Management Homepage Running On VMware ESX Server 2.5 May Appear Unresponsive

SYSTEM ROM UPDATE RECOMMENDED: ProLiant BL25p and ProLiant BL45p Blade Server May Intermittently Exhibit a Temperature Violation Error under Normal Operating Conditions

SYSTEM ROM UPGRADE RECOMMENDED for ProLiant BL25p, ProLiant BL35p, ProLiant DL385, ProLiant DL585 Servers to Prevent Potential System Hang using Integrated Lights-Out (iLO) Virtual Serial Port Feature

Systems Insight Manager Will Not Recognize Remote Insight Lights-Out Edition II (RILOE II) Or Integrated Lights-Out (iLO) If HTTPS Port Is Changed

Tape Backup In StorageWorks Enterprise Backup Solution (EBS) Environment On ProLiant Server May Not Complete If Insight Management Storage Agents Are Loaded

TFTP Via Telnet May Cause HP ProLiant BL p-Class GbE2 Interconnect Switch Running Firmware Version 1.0.0 To Panic

The `Save` Command On The HP ProLiant BL p-Class GbE2 Interconnect Switch Running Firmware Version 1.0.0 Will Not Save Telnet Port Setting If Value Other Than Default Is Entered

The Change Configuration Task In The Rapid Deployment Pack Does Not Correctly Set The Gateway And DNS Settings When The Target Server Is Running Red Hat Linux

The CR3500 Configuration Utility Does Not Add Proper File Extension

The Erase Utility Included With Rapid Deployment Pack Release 1.40 Cannot Be Used With Smart Array 64X Controllers Or Smart Array 64XX Controllers

The Remote Deployment Console Utility (SETUPC.EXE) Has Been Enhanced On SmartStart Release 6.20 (And Later) To Allow Running Multiple Instances On The Same System

Third-Party Switches With Spanning Tree Protocol Disabled May Prevent ProLiant BL e-Class And ProLiant BL p-Class C-GbE Interconnect Switches From Identifying Data Loops

Trunk Groups That Contain Port 1, Port 17, Or Port 18 Are Not Displayed When Viewing Trunk Group Information For The HP ProLiant BL p-Class GbE2 Interconnect Switch Via The Browser-Based Interface

Unable To Log Into Insight Manager 7 (IM7) After Installing HP Rack And Power Manager Version 1.1

Unable To Log Into Insight Manager 7 On Systems With Renamed Domain Accounts

Unable To Modify The ProLiant BL p-Class Server Enclosure Or Rack Infrastructure Name Using The Integrated Lights-Out (iLO) User Interface

Updating Microsoft XML Parser Requirements For Remote Deployment Utility For Windows NT 4.0 And Windows 2000 - ProLiant Support Pack 5.50 and 6.00

Upgrading Integrated Lights-Out (iLO) Firmware Using The Windows Flash Component From Within A Terminal Services Session Will Not Complete

Uploading any Windows ProLiant Support Pack (PSP) from the SmartStart CD Upload Utility to the Version Control Repository Manager (VCRM) will not be Successful if the Default Browser is Mozilla

UPS R3000 XR May Not Switch From Internal Battery Power When Generator Comes Online As Main Power Source

USB Mouse Does Not Function Under Integrated Lights-Out (iLO) Remote Console On ProLiant Servers Running Linux

Use Local Administrator Account To Install OpenSSH As Part Of HP Systems Insight Manager For Use With ProLiant Essentials Vulnerability And Patch Management Pack (VPM) Release 1.0

Use Of TCP/IP Reserved Port Zero Causes Integrated Lights-Out (iLO) To Stop Responding

Users Directed To Previously Selected Page When Inactivity Timer Expires On Integrated Lights-Out (iLO) Controller

Using insmod Command to Load the HP NC10xx/67xx/77xx/150x/320x/325x Gigabit Ethernet NIC Driver for Linux Causes a Panic if the tg3 Module is Already Inserted in the Kernel on ProLiant Servers

Using Lights-Out Migration Command Line Utility (HPQLOMGC.EXE) To Upgrade iLO, RILOE, And RILOE II Firmware From A Version Supporting Directory Services To A Later Firmware Version

Using ProLiant Essentials Rapid Deployment Pack 1.30 (Or Earlier) Will Display e2prep Process Under Linux As `3`

Using The HPQLOMIG Utility To Configure RILOE, RILOE II, Or iLO May Prevent Users From Authenticating To The Device

Using The Microsoft Remote Installation Service Client To Install Windows Server 2003 On ProLiant BL20p G2 and G3 Servers May Result In The Display Of `Shift` And Key Strokes

Using Version Control Agent 2.1.0 To Attempt Manual Reinstallation Of Some Linux Component RPMs Without Force Option May Return `Major` In Version Control Agent Result Page Instead Of `Informational`

Version Control Agent (VCA) May Report Degraded Server Status Following Removal Of A Hardware Option

Version Control Agent Displays and Updates Firmware for Only One Smart Array Controller on ProLiant Servers Configured with Multiple Smart Array Controllers

Version Control Agents for Linux May Not be able to Retrieve Software Inventory on ProLiant Server Running SUSE LINUX Enterprise Server

Version Control Repository Automatic Update Schedule May Not Reset When The System Time Is Updated

Version Control Repository Manager (VCRM) Home Page Displays ProLiant Support Packs for Linux as `Invalid`

Version Control Repository Manager (VCRM) Not Accessible After Installing HP Systems Insight Manager (HPSIM) 4.1

Version Control Repository Manager May Not Recognize Recent ProLiant Support Pack Files

VLAN(s) No Longer Displayed In HP Network Configuration Utility (NCU) When Other Network Adapters Are Disabled

VMware ESX Server May Not Boot and a Kernel Panic May Occur when Shared and Dedicated Smart Array Controllers use the Same Driver and ProLiant Servers Running VMware ESX Server 2.x

VMware ESX Server VMkernel May Not Load on ProLiant BL45p Blade Server with Three or Four Processors and a System ROM dated Prior to 8/31/05

VMware Log Files for Virtual Machines may fill up with Excessive Virtual Machine Status Messages After Installing the HP Virtual Machine Management Agent Version 1.1 (or earlier)

When Using Remote Deployment Utility or Version Control Manager to Upgrade the System Management Homepage from Version 2.1.0 to Version 2.1.2 Preconfigured Settings in Version 2.1.2 may be Lost