 |
» |
|
|
|
|
|
|
|
|
HP ProLiant ML350e Gen8 Server - Specifications
Physical specifications
| Specifications
|
Description
|
|---|
| Dimensions
(H x W x D)
(with feet/bezel) |
46.2 x 21.8 x 74.0 cm (18.19 x 8.58 x 29.13 in) |
| Weight
(approximate) |
Maximum
(all hard drives, power supplies, and processors installed)
Minimum
(one hard drive, power supply, and processor installed)
|
Electrical specifications
| Specifications
|
Description
|
|---|
| Input requirements
(per power supply) |
| Rated line voltage |
100 to 240 V ac |
| Rated input current |
7.1 A (at 120 V ac) to 3.5 A (at 240 V ac) |
| Rated input frequency |
50 to 60 Hz |
| Rated input power |
852 W |
| Power supply output
(per power supply)
|
| Rated steady-state power |
|
| Maximum peak power |
|
| BTU rating
(maximum) |
|
Environmental specifications
| Specifications
|
Description
|
|---|
| System inlet temperature
|
| Operating |
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per 304.8 m (1.8°F per 1000 ft) above sea level to a maximum of 3048 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.
|
| Non-operating |
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr) |
| Relative humidity
(non-condensing) |
| Operating |
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing. |
| Non-operating |
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. |
| Altitude
|
| Operating |
3048 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min) |
| Non-operating |
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min) |
| Acoustic noise
1
|
| Idle |
L WAd
4.2 B (Entry models)
4.2 B (Base models)
L pAm
26 dB (Entry models)
25 dB (Base models)
|
| Operating |
L WAd
4.2 B (Entry models)
4.3 B (Base models)
L pAm
26 dB (Entry models)
26 dB (Base models)
|
| Emissions classification
2
(EMC) |
| FCC rating |
Class B |
| Normative standards |
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 |
|
NOTE:
|
1
. Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C (73.4ºF) ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Configurations tested for entry models included Windows 2008 Enterprise 64-bit.
Configurations tested for base models included one (1) 1TB non-hot plug LFF SATA HDD and Windows 2008 Enterprise 64-bit.
The listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels.2
. Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. |
|
HP iLO 4 On System Management specifications
| Specifications
|
Description
|
|---|
| Architecture
|
PCI Express based health and remote management ASIC |
| Processor
|
Embedded ARM processor core operating at 400 MHz |
| Upgradeability
|
Firmware upgradeable via Flash ROM
|
| Video support
|
1920 x 1200 (16 b/p) DVR max resolution |
| Interfaces
|
HP iLO dedicated1
network connection (10/100/1000 Mb/s) on rack, tower and SL systems
HP iLO shared network connection (10/100/1000 Mb/s) on rack, tower and SL systems
HP iLO network connection to blades (100 Mb/s) to Onboard Administrator (with 10/100/1000 Mb/s uplink) on blade systems
|
| Memory
|
|
| Operating system support
|
Click here for information on HP's certified and supported ProLiant Servers for OS and virtualization software and latest listing of software drivers available for the server including how to purchase from HP
. |
| Client system support
|
For information on Client System support, please visit the HP iLO feature comparison site.
Click here to access the site
. |
| Client browser support
|
Microsoft Internet Explorer 92
Microsoft Internet Explorer 83
Microsoft Internet Explorer 7
Firefox Extended Support Release (ESR) 10 (on supported Windows and Linux systems
Firefox 3.6 (on supported Windows and Linux systems)
|
| Command line support
|
|
| Security
|
|
| Directory support services
|
Active Directory v1.0 (Windows 2003) |
| Driver support
|
HP ProLiant iLO 4 management controller driver package |
| Management protocols supported
|
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP RIBCL XML |
|
NOTE:
|
1
. Optional module on some servers.2
. For customers using Protected mode, please use the Java based version of Integrated Remote Console.3
. For customers using Protected mode, please use the Java based version of Integrated Remote Console. |
|
HP Dynamic Smart Array B120i controller specifications
| Specifications
|
Description
|
|---|
| Dimensions
|
Embedded |
| Disk drive and enclosure interface - transfer rate
|
Up to 6 Gb/s SATA |
| SATA connectors
|
6 internal connectors with hot plug support |
| Server interface
|
PCIe 2.0 |
| SATA speed
|
6 Gb/s SATA links |
| Cache memory
|
Optional 40-bit 512MB ECC protected Flash Backed Write Cache (FBWC) |
| Logical drives supported
|
Zero memory, Up to 2 logical volumes (6 physical drives) |
| Host memory addressing
|
64-bit, supporting greater than 4GB server memory space |
| RAID support
|
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
RAID 5 with optional 512MB FBWC1
|
|
NOTE:
|
1
. 512MB cache is required to enable RAID 5 support. |
|
HP Ethernet 1Gb 2-port 361i adapter specifications
| Specifications
|
Description
|
|---|
| Network interface
|
10Base-T/100Base-TX/1000Base-TX |
| Compatibility
|
|
| Data transfer method
|
PCI Express V2.0, 5.0 GT/s with x2 link (fixed) |
| Controller
|
Intel I350 Powerville |
| Network transfer rate
|
10Base-T (Half-Duplex) - 10 Mb/s per port, 20 Mb/s combined
10Base-T (Full-Duplex) - 20 Mb/s per port, 40 Mb/s combined
100Base-TX (Half-Duplex) - 100 Mb/s per port, 200 Mb/s combined
100Base-TX (Full-Duplex) - 200 Mb/s per port, 400 Mb/s combined
1000Base-TX (Half-Duplex) - 1000 Mb/s per port, 2000 Mb/s combined
1000 Base-TX (Full-Duplex) - 2000 Mb/s per port, 4000 Mb/s combined
|
| Connector
|
RJ-45 |
| Cable support
|
10Base-T - categories 3, 4 or 5 UTP; up to 100 m (328 ft)
10/100/1000Base-TX - Category 5E or better; up to 100 m (328 ft)
|
Link to product overview information
|
|
Printable version
