» Sign-in with HP Passport | » Register
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
Search:
More options
 
hp.com home


HP Support document

» 

Business Support Center

HP Passport Sign-in

» Sign-in with HP Passport
» Register
» Learn more...

Tasks

» Download drivers and software
» Troubleshoot a problem
» Setup, install, and configure
» Discover and use a product
» Perform regular maintenance
» Upgrade and migrate
» Recycle and dispose
»

Resources

» Customer Self Repair
» Diagnose problem or Chat (HP Instant Support)
» Support Forums
» Guided troubleshooting
» Manuals
» Submit a support case
» See more...
» Help
» Site map
» HP Support Center

HP and Compaq Desktop PCs - Motherboard Specifications, MSI MS-7778 (Jasmine)

Figure 1: The Jasmine motherboard
Photograph of motherboard
Motherboard description
  • Manufacturer's name: MSI
  • Motherboard name: MSI MS-7778
  • HP/Compaq name: Jasmine
Form Factor
  • uATX: 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)
Chipset
  • AMD A75 FCH
Front-side bus speed
  • UMI (Unified Media Interface)
  • 4 lanes, 5 GT/s per lane
Processor upgrade information
  • Socket type: FM2
  • Motherboard supports the following processor upgrades:
    Processor TDP
    Trinity Dual-Core A4-5300 65W
    Trinity Dual-Core A6-5400K 65W
    Trinity Quad-Core A8-5500 65W
    Trinity Quad-Core A8-5600K 100W
    Trinity Quad-Core A10-5700 65W
    Trinity Quad-Core A10-5800K 100W
Memory upgrade information
  • Dual channel memory architecture
  • Four 240-pin DDR3 DIMM sockets
  • Supports DDR3 DIMMs
    • PC3 10600 (1333 MHz)
    • PC3 12800 (1600 MHz)
    • PC3 14400 (1866 MHz)
  • Non-ECC memory only, unbuffered
  • Supports 1 GB, 2 GB, 4 GB or 8 GB DIMMs
  • Supports up to 4 GB on 32-bit* systems
  • Supports up to 32 GB on 64-bit systems
NOTE: *available memory may be less
Video
Integrated Graphics
*Integrated video is not available if a graphics card is installed.
  • Supports PCI Express x16 graphics cards
  • Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently
  • DVI and VGA ports (Can be used at the same time)
The integrated graphics differ by processor
Model Radeon graphics brand TDP
AMD A-Series Processors
AMD Trinity Dual-Core A4-5300 HD7480D 65W
AMD Trinity Dual-Core A6-5400K HD7540D 65W
AMD Trinity Quad-Core A8-5500 HD7560D 65W
AMD Trinity Quad-Core A8-5600K HD7560D 100W
AMD Trinity Quad-Core A10-5700 HD7660D 65W
AMD Trinity Quad-Core A10-5800K HD7660D 100W
Audio
Integrated IDT 92HD73E Audio
*Integrated audio is not available if a sound card is installed.
  • Built-in High Definition 8 channel audio with jack sensing
  • Audio codec: IDT 92HD73E
Network
LAN: 1000-Base-T
  • Technology: Atheros AR8161L gigabit ethernet controller
  • Data transfer speeds: up to 10/100/1000 Mb/s
  • Transmission standards: 1000-Base-T Ethernet
Expansion Slots
  • One PCI Express x16 (Gen 2.0)
  • Three PCI Express x1 (Gen 2.0)
  • One PCI Express mini card (Gen 2.0)
I/O Ports and internal connectors
Back I/O ports
Figure 2: Back I/O panel
1 - USB 2.0: 2
2 - S/PDIF
3 - VGA
4 - DVI-D
5 - LAN
6 - USB 2.0: 2
7 - USB 3.0: 2
8 - Audio: Center/Subwoofer port (yellow orange)
9 - Audio: Rear Speaker Out port (black)
10 - Audio: Side Speaker Out port (gray)
11 - Audio: Line In port (light blue)
12 - Audio: Line Out port (lime)
13 - Audio: Microphone port (pink)
Internal Connectors
  • 1x CPU socket
  • 1x ATX 24-pin power
  • 1x ATX 4-pin power
  • 1x ATX CPU power
  • 6x SATA 3.0
  • 1x CPU fan
  • 1x System fan
  • 1x WLAN card LED
  • 1x Front panel
  • 1x Front panel audio
  • 2x USB 2.0 (each connector supports 2 ports)
  • 1x USB 2.0 (supports 1 port)
  • 1x USB 3.0 (supports 2 ports)
Clearing the CMOS settings
CAUTION: Do not change any jumper setting while the computer is on. Damage to the motherboard can result.
This motherboard has a jumper to clear the Real Time Clock (RTC) RAM in CMOS.
  1. Turn OFF the computer and unplug the power cord.
  2. Move the jumper to from pins 1-2 (default) to pins 2-3, then move the jumper back to default
  3. Plug the power cord and turn ON the computer.
Clearing the PASSWORD settings
The BIOS password is used to protect BIOS settings from unwanted changes.
To erase the BIOS password follow these steps:
  1. Turn OFF the computer and unplug the power cord.
  2. Move the jumper to from pins 1-2 (default) to pins 2-3, then move the jumper back to default
  3. Plug the power cord and turn ON the computer.
Motherboard layout
Figure 3: layout

   Content feedback
To help us improve our content, please provide your feedback below.

1. How does the information on this page help you?

   very helpful somewhat helpful not helpful
 

2. Was it easy to find this document?

   easy not easy

3. If you selected not easy for question 2, in which section did you expect to find it?

     

4. Comments:

 
 
- Your feedback will be used to improve our content. Please note this form is for feedback only, so you will not receive a response.
Contact HP if you need technical assistance.

Printable versionPrintable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2013 Hewlett-Packard Development Company, L.P.