 |
» |
|
|
|
|
|
|
|
|
HP LaserJet Pro CP1025 and CP1025nw Color Printers - Replacing Print Cartridges
Introduction
This document contains steps to make sure that the new print cartridge is compatible with your HP product, and to replace an old print cartridge with a new one.
Replacing print cartridges
Follow these steps to replace a print cartridge.
Video of replacing a print cartridge
The following video demonstrates how to replace a print cartridge.
Step one: Check print cartridge compatibility
Before unpacking a new print cartridge, make sure that it is compatible with your HP product.
Contextual Wrapper
Click this link,
HP Home & Home Office Store
(US only), and then click Ink Toner & Paper
to purchase cartridges or check cartridge compatibility for your printer. If you are located outside of the US, follow these steps to purchase cartridges using HP SureSupply.
-
Scroll to the bottom of the page and make sure that the country or region location is correct.
Which cartridges you use depends on your country or region. Follow these steps to purchase cartridges or check cartridge compatibility for your printer using HP SureSupply.
-
Scroll to the bottom of the page and make sure that the country or region location is correct.
Step two: Replace a print cartridge
| CAUTION:
|
If toner gets on any clothing, wipe it off with a dry cloth and wash the clothing in cold water.
Hot water sets toner into the fabric.
|
Press the Power button ( 
) to turn on the product. Close the print cartridge and rear doors, if they are not already closed.
Figure 1: Close the print cartridge door
Image: Close the print cartridge door. |
Figure 2: Close the rear door
Image: Close the rear door. |
On the control panel, press the Print Cartridge button ( 
) that corresponds to the print cartridge you want to replace. The product makes noises while the print cartridge carousel rotates. | CAUTION:
|
Wait until the Print Cartridge light (
) stops flashing and the rotation sounds stop
before proceeding to the next step. |
Figure 3: Press the print cartridge button
Image: Press the print cartridge button. Open the print cartridge door.
Figure 4: Open the print cartridge door
Image: Open the print cartridge door. Grasp the handle on the print cartridge and then pull the print cartridge straight out to remove it. Put the old print cartridge aside.
Figure 5: Remove the old print cartridge
Image: Remove a print cartridge. Remove the new print cartridge from the packaging.
Figure 6: Remove the print cartridge from its packaging
Image: Remove the print cartridge from its packaging. Place the old print cartridge in
the bag and box for recycling.
Figure 7: Recycle the old print cartridge
Image: Recycle the old print cartridge. Grasp both sides of the new print cartridge, and then
gently rock the print cartridge to distribute the
toner evenly inside.
| CAUTION:
|
To prevent damage to the print
cartridge, hold the print cartridge at each end.
Do not touch the roller on the print cartridge. |
Figure 8: Gently rock the print cartridge
Image: Gently rock the print cartridge. Remove the protective tape from the new print cartridge. Put the tab in the print cartridge box to return for recycling.
Figure 9: Remove and recycle the protective tape
Image: Remove and recycle the protective tape. Remove the protective shielding from the new
print cartridge.
Figure 10: Remove the shield
Image: Remove the shield. Grasp the print cartridge by the center handle,
and then insert the print cartridge into the correct slot.
Figure 11: Insert the print cartridge into the correct slot
Illustration: Insert the print cartridge into the correct slot. | Tip:
|
| Make sure that the color label on the print cartridge matches the color label in the carousel slot. |
Close the print cartridge door.
When you close the print cartridge door,
the Print Cartridge, Ready, and Attention lights flash. Allow up to three minutes for the
product to calibrate.
Figure 12: Close the print cartridge door
Image: Close the print cartridge door. Repeat these steps for each print cartridge that you want to replace. Make sure you reinsert each print cartridge in its correct slot on the carousel.
|
|
Printable version
