Click this link, HP Home & Home Office Store (US only), and then click Ink Toner & Paper to purchase cartridges or check cartridge compatibility for your printer.

If you are located outside of the US, follow these steps to purchase cartridges using HP SureSupply.

1. Click this link, HP SureSupply .
2. Scroll to the bottom of the page and make sure that the country or region location is correct.

Which cartridges you use depends on your country or region. Follow these steps to purchase cartridges or check cartridge compatibility for your printer using HP SureSupply.

1. Click this link, HP SureSupply .
2. Scroll to the bottom of the page and make sure that the country or region location is correct.

To purchase paper, go to HP Home & Home Office .

Paper-tray capacities

Tray	Paper Type	Specifications	Quantity
Main input tray	Paper	Range: 60 g/m2 (16 lb) bond to 163 g/m2 (43 lb) bond	150 sheets of 75 g/m2 (20 lb) bond
	Envelopes	Less than 60 g/m2 (16 lb) bond to 90 g/m2 (24 lb) bond	Up to 10
	Transparencies	Minimum 0.13 mm (0.005 in) thick	Up to 75
Priority input slot	Paper	Range: 60 g/m2 (16 lb) bond to 163 g/m2 (43 lb) bond	Equivalent to 10 sheets of 75 g/m2 (20 lb) bond
	Envelopes, transparencies, labels, cardstock	Varies	1
Output tray	Paper	Range: 60 g/m2 (16 lb) bond to 163 g/m2 (43 lb) bond	Up to 125 sheets of 75 g/m2 (20 lb) bond
	Envelopes	Less than 60 g/m2 (16 lb) bond to 90 g/m2 (24 lb) bond	Up to 10
	Transparencies	Minimum 0.13 mm (0.005 in) thick	Up to 75

Paper types and sizes

Type	Size
Paper	Letter: 216 x 279 mm (8.5 x 11 in)
Envelopes	U.S. 10: 105 x 241 mm (4.125 x 9.5 in)
Postcards	100 x 148 mm (3.94 x 5.83 in)
Transparency films	Letter: 216 x 279 mm (8.5 x 11 in)
Labels	Letter: 216 x 279 mm (8.5 x 11 in)

Electrical

Specification	110-volt models	220-volt models
Power requirements	115 to 127 V (+/-10%) 60 Hz (+/-2 Hz)	220 to 240 V (+/-10%) 50 Hz (+/-2 Hz)
Minimum recommended circuit capacity	12 A	6 A

Power consumption (average in watts)¹

Model	Printing	Ready	Sleep	Off	Heat output-Ready (BTU/hour)
LaserJet Pro P1102 Printer	360	1.4	0.9	0.6	41
LaserJet Pro P1102w Printer	370	2.7	2.0	0.6	41

¹ The power consumption reflects the highest values measured for monochrome printing when using standard voltages.

Recommended operating conditions

Environment	Operating	Storage
Temperature	10 ° to 32.5 °C (50 ° to 91 °F)	0 to 35 °C (32 to 95 °F)
Relative humidity	10% to 80%	10% to 80%

Energy Star

This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active. This product qualifies for ENERGY STAR®, which is a voluntary program established to encourage the development of energy-efficient office products.

ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner, HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.

For more information, go to the Energy Star Web site (in English).

Materials safety data sheets

To view Material Safety Data Sheets (MSDS), go to http://www.hp.com/go/msds (in English).

Ozone production

This product generates no appreciable ozone gas (O₃ ).

Paper and plastic use

This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002. Plastic parts over 25 grams (0.88 ounces) are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.

Print cartridge recycling

Multilingual program information and instructions are included in every new HP LaserJet print cartridge and supplies package.

Printer recycling

HP offers an increasing number of product return and recycling programs in many countries and regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information about the recycling of HP products, go to www.hp.com/hpinfo/globalcitizenship/environment/recycle/ (in English).

Exposure to radio frequency radiation

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The device is certified as a “Class 1�? laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Since radiation emitted inside the device is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.

Regulatory model identification number

BOISB-0902-00