» Sign-in with HP Passport | » Register
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
Search:
More options
 
hp.com home


HP Support document

» 

Business Support Center

HP Passport Sign-in

» Sign-in with HP Passport
» Register
» Learn more...

Tasks

» Download drivers and software
» Troubleshoot a problem
» Setup, install, and configure
» Discover and use a product
» Perform regular maintenance
» Upgrade and migrate
» Recycle and dispose
»

Resources

» Customer Self Repair
» Diagnose problem or Chat (HP Instant Support)
» Support Forums
» Guided troubleshooting
» Manuals
» Submit a support case
» See more...
» Help
» Site map
» HP Support Center

HP ProLiant DL120 G5 Server - Overview


Product description
The HP ProLiant DL120 G5 Server is an entry-level rack-optimized server providing a single processor, 1U form-factor and is ideal for single-application IT infrastructure, web and edge-of-network applications.
Product features
Technical Specifications
System Unit Dimensions (H x W x D)

1.69 x 17.64 x 27.5 in (4.30 x 44.80 x 69.85 cm)
Weight

Maximum

32.40 lb (14.70kg)
Minimum

31.00lb (14.00kg)
Input Requirements

Range Line Voltage 90 - 132 VAC,

Rated Input Current 6 A (at 100 VAC),

Rated Input Frequency 47 to 63 Hz
Rated Input Power <500W @115/230 VRMS (For frequency only)
BTU Rating Maximum 1194 BTU/hr (at 115/230 VRMS)
Power Specifications Click here to use the Power Calculator to review typical system power ratings .
Power Supply Output

Rated Steady-State Power 350 W (at 115/230 VRMS),

Maximum Peak Power 350 W (at 115/230 VRMS),

System Inlet Temperature Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 300 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.

Non-operating -30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity

Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude Operating 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle  
LWAd 6.26 B
LpAm 43.8 dBA
Operating  
LWAd 6.28 B
LpAm 44.5 dBA
 
Power Supply Input voltage specifications Rated input voltage 100 VAC to 240VAC
Input Specifications Rated input line 90 VAC to 264 VAC
Frequency range 47 to 63 Hz
Rated input power @ 115 V input, Rated input power = 500 W (assume output wattage=350 W

Rated input current 6 A, 3 A (110 V, 220 V)
Steady state power 350W (rated)
BTU Rating 1710 BTU/hr  
Ambient temperature range Operating 50° to 118° F (10° to 48° C)
Non-operating -40° to 158° F (-40° to 70° C)
Relative humidity

Operating 55% to 85%
Non-operating 5% to 95%
Dielectric voltage withstand Input to output  
Input to ground  
Maximum Wet Bulb Temperature 106.3° F (41.3° C)  
 
Integrated Serial ATA Controller Simultaneous drive transfer channels 4 channels
Transfer rate synchronous

150 MB/s per channel; 300 MB/s in RAID 0 pair
Data transfer method Intel 82801IR Integrated Serial ATA Host Controller (non-RAID mode)

Drive support Serial ATA
Data transfer modes Legacy Mode

Protocol Serial ATA
Feature NCQ (Native Command Queuing); AHCI (Advanced Host Controller Interface)
RAID levels supported 0, 1
RAID Features Supports multiple logical volumes

RAID OS Support Microsoft Windows Server 2003

 
Embedded NC105i PCIe Gigabit Server Adapter Network Interface 10Base-T/

Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
Compatibility IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method Four lane (x4), 100MHz PCI Express Reference Clock
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and Full-Duplex) 2000Mb/s
Connector RJ-45 connector
Cable Support 10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m)
 
Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. Click here for trade-in information or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

 
Memory
HP ProLiant DL120 G5
Standard Memory

NOTE: The chart below does not represent all possible configurations. For best performance, HP recommends dual-bank interleaved mode configurations. For dual-bank interleaved mode, DIMMs must be installed in both banks with equal bank capacities.
Memory Slot
  DIMM_CH1_C DIMM_CH1_A DIMM_CH2_D DIMM_CH2_B Mode
Optional 512 MB Empty 512 MB Empty Empty Single-bank
Standard 1 GB Empty 1GB Empty Empty Single-bank
Optional 1 GB Empty 512MB Empty 512MB Dual-bank interleaved
Standard 2 GB Empty 1GB Empty 1G Dual-bank interleaved
Maximum 8 GB 2 GB 2 GB 2 GB 2 GB Dual-bank interleaved
Following are memory options available from HP:
2 GB Unbuffered PC2-6400 ECC DIMM (1 x 2 GB) 450260-B21
1 GB Unbuffered PC2-6400 ECC DIMM (1 x 1 GB) 450259-B21
512 MB Unbuffered PC2-6400 ECC DIMM (1 x 512 MB) 450258-B21
Important links
Product specifications
Guided Troubleshooting (GT)
Warranty
QuickSpecs
Information for this Overview is taken from the product QuickSpecs. To access the complete QuickSpecs for this product, select the desired link from the following list:

   Content feedback
To help us improve our content, please provide your feedback below.

1. How does the information on this page help you?

   very helpful somewhat helpful not helpful
 

2. Was it easy to find this document?

   easy not easy

3. If you selected not easy for question 2, in which section did you expect to find it?

     

4. Comments:

 
 
- Your feedback will be used to improve our content. Please note this form is for feedback only, so you will not receive a response.
Contact HP if you need technical assistance.

Printable versionPrintable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2013 Hewlett-Packard Development Company, L.P.