 |
» |
|
|
|
|
|
|
|
|
HP ProLiant DL180 G5 Server - Overview
Product description
|
The HP ProLiant DL180 G5 is a low cost high capacity storage optimized 2-way server, that delivers on a history of design excellence and 2U density for a variety of rack deployments and applications.
|
Product features
| Feature
|
Description
|
|---|
| Processors
|
Supports up to two Quad-Core Intel® Xeon® processors: 5400 sequence with 12MB Level 2 cache |
| System Board Chipset
|
Intel® 5100 Chipset
|
| Memory
|
Up to 24GB of memory supported by six (6) PC2-5300 (667 MHz) DDR2 memory slots |
| Internal Drive Support
|
Supports up to twelve via CTO with controller or up to eight via BTO with the addition of a controller:
Hot Plug Serial ATA (SATA) 3.5"hard drives; or
Hot Plug Serial Attached SCSI (SAS) 3.5"hard drives |
| Internal storage capacity
|
SATA Models: Up to 12.0TB (12 x 1TB Hot Plug 3.5" hard drives)
|
| Network Controller
|
One integrated NC105i PCI-e Gigabit NIC (embedded) (Wake on LAN and PXE capable) |
| Storage Controllers
|
HP Embedded SATA RAID Controller (up to 4 hard drive support on standard BTO models)
|
| Expansion Slots
|
One available Low Profile x8 PCI-Express slot using a Low profile Riser.
|
| Infrastructure Management
|
Optional HP Lights Out 100c Remote Management card with Virtual KVM and Virtual Media support (includes IPMI2.0
and SMASH support) |
| USB Ports
|
Seven USB ports: (2) front, (4) rear, (1) internal |
| Optical Drive
|
Support for one of the following:
|
| Power Supply
|
750W Power Supply (Optional Redundancy Hot Plug, Autoswitching) CSCI 2007/8
1200W High Efficiency Power Supply (Optional Redundancy Hot Plug, Autoswitching) (Optional) CSCI 2007/8 |
| Form Factor
|
2U rack models
|
| Deployment/Serviceability
|
Tooled access to all system components for easy in rack serviceability
|
| Technical Specifications
|
| System Unit
|
Dimensions (H x W x D)
|
3.44x 17.64 x 27.50 in (8.75 x 44.80 x 69.88cm) |
Weight
|
Maximum
|
51.5 lb (19.22 kg) |
Minimum
|
35.0 lb (13.06 kg) |
Input
|
Rated Line Voltage
|
100 - 240 VAC |
| Rated Input Current
|
9.10 A (at 100 VAC),
|
| Rated Input Frequency
|
50 to 60 Hz |
| Rated Input Power
|
910 W (at 100 VAC),
|
| BTU Rating
|
Maximum
|
3107.82 BTU/hr (at 100 VAC),
|
| Power Specifications
|
To review typical system power ratings use the Power Calculator which is available via the online tool located at URL:
|
Power Supply Output
|
Rated Steady-State Power
|
750 W (at 100 VAC),
|
| Maximum Peak Powe
r |
750 W (at 100 VAC),
|
| System Inlet Temperature
|
Operating
|
50° to 95°F (10° to 35°C) at sea level with an altitude derating of 1.8°F per every 1000 ft (1.0°C per every 305 m) above sea level to a maximum of 10,000 ft (3050 m), no direct sustained sunlight. Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed.
|
| Non-operating
|
-22° to 140° F (-30° to 60° C). Maximum rate of change is 36° F/hr (20° C/hr). |
Relative Humidity
|
Operating
|
10 to 90% relative humidity (Rh), 82.4° F (28° C) maximum wet bulb temperature, non-condensing. |
| Non-operating
|
5 to 95% relative humidity (Rh), 101.7° F (38.7° C) maximum wet bulb temperature, non-condensing. |
| Altitude
|
Operating
|
10,000 ft (3050 m). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 1500 ft/min (457 m/min). |
| Non-operating
|
30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min). |
| Acoustic Noise
|
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). |
|
| One integrated NC105i PCI-e Gigabit NIC (embedded) (Wake on LAN and PXE capable)
|
| Network Interface
|
Integrated 10Base-T / 100Base-TX / 1000Base-TX Transceiver |
| Compatibility
|
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver. |
| Data Transfer Method
|
Compliant to x1 PCIe Specification |
| Network Transfer Rate
|
10Base-T (Half-Duplex) |
10 Mb/s |
| 10Base-T (Full-Duplex) |
20 Mb/s |
| 100Base-TX (Half-Duplex) |
100 Mb/s |
| 100Base-TX (Full-Duplex) |
200 Mb/s |
| 1000Base-TX (Half and Full-Duplex) |
2000 Mb/s |
| Connector
|
RJ-45 |
| Cable Support
|
Performs all the physical layer functions for 10BASE-T, 100BASE-T, and
1000BASE-T Ethernet on standard Category 5 UTP
|
|
| Environment-friendly Products and Approach
|
| End-of-life Management and Recycling
|
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
|
|
Important links
Guided Troubleshooting (GT)
:
Warranty
:
QuickSpecs
:
Information for this Overview is taken from the product QuickSpecs. To access the complete QuickSpecs for this product, select the desired link from the following list:
|
|
Printable version
