 |
» |
|
|
|
|
|
|
|
|
HP LaserJet 3050, 3052, 3055, 3390 and 3392 AiO Printer series - Windows XP: How to Program the Scan To Button and Create New Destinations
Information
The Scan To button must be programmed before it be used. However, some destinations are programmed by default if the all-in-one is directly connected to the computer. |
NOTE:
|
The following screen shots and instructions are specific to Windows XP. Windows Vista (32 bit) instructions will be similar. |
Details
To program the Scan To button: Select Start > Programs
or All Programs > HP > HP LaserJet 3050, 3052, 3055, 3390, 3392 > Scan
ClickSetup
to open the Scan To Setup Wizard.
Click to select the Change the destinations that show up on the all-in-one control panel when I press the button
and then click Next
.
Check Allow me to scan
by pressing the Scan To
button on the all-in-one check box.
Choose the destination by moving them from the PC window (the left window) to the All-in-one window (the right window).
|
NOTE:
|
The All-in-one window might contain items set up by other computers that are connected to the all-in-one. You cannot make changes to these items. |
Click Update
.
To Create a new destination do the following: Follow steps 1-2 from the first set of instructions.
Select Create a new destination with settings that I will specify
and then select Next
.
Select the Save it to my computer
and then press Next
.
Select the scan preferences and then select Next
.
Select the scan destination folder and file format type and then select Next
.
|
NOTE:
|
If you wish to use a custom folder for your scan destination, you will need to create the folder prior to this setup wizard in order to browse to it. |
Select the quality level you would like the file to be saved as.
Name the new destination on the computer, check the Send
this new destination to the all-in-one check box, and enter a name for the display on the all-in-one. Then select Next
.
Confirmation allows you to verify your settings. Select Save
.
Once the new destination has been saved, the new destination will be configured as one of the Scan To destinations on the printer. |
|
Printable version
