 |
» |
|
|
|
|
|
|
|
|
HP Integrity rx1620 Server - Specifications
System Specifications
| Processor and Memory
|
|---|
| Supported processors |
1.3-GHz Intel Itanium 2 processor
- 3 MB
cache
- Floating point coprocessor
1.6-GHz Itanium 2 processor
- 3 MB cache
- Floating point coprocessor
|
| System memory |
Minimum memory
Maximum memory capacity
|
Component Specifications
| Storage, I/O and Adapters
|
|---|
| Internal disks |
Maximum disk mechanisms
Maximum disk capacity
|
| Standard integrated I/O |
Ultra320 SCSI-LVD
10/100/1000Base-T (RJ-45 connector)
RS-232 serial ports
USB
10/100Base-T management port
(RJ-45 connector)
VGA graphics
|
| I/O buses and slots |
Total PCI-X/PCI slots
one full length,
one shorter length slot (accommodates cards up to 7.5")
All four slots are 133-MHz, 64-bit slots on dedicated PCI-X buses |
| Maximum mass storage host bus adapters
|
Ultra160 SCSI–LVD
Dual-port Ultra160 SCSI–LVD
Smart Array Ultra160 SCSI RAID
2-Gb single-port fibre channel
|
| Maximum network interface cards |
1000Base-SX
1000Base-TX
10/100Base-TX
Dual-port X.25
4-port 10/100Base-TX
Dual Port GigE-TX
Dual Port GigE-SX
|
Physical Specifications
| Physical Characteristics
|
|---|
| Site preparation |
- Rack depth:
680 mm (26.8 in)
- Minimum standalone configuration:
13.2 kg (29 lb)
- Maximum standalone configuration:
14.1 kg (31 lb)
- Minimum rack configuration:
14.1 kg (31 lb)
- Mzsimum rack configuration:
15.0 kg (33 lb)
|
| Physical Dimensions |
- Height: 43 mm (1.7 in) / 2U EIA
-
Width: 482 mm (19 in)
-
Depth: 680 mm (26.8 in)
- Rack-optimized design includes rackmount solution for HP racks (HP Rack System/E and HP 10000 series racks)
|
Electrical Specifications
| Electrical Characteristics
|
|---|
| AC input power |
100-240 V 50/60 Hz |
| Maximum input power |
585 W |
| Typical input power |
440 W |
| Maximum input current |
6 A at 100 Vrms; 3 A at 200 Vrms |
| Typical BTU |
1390 |
Environmental Specifications
| Environmental characteristics
|
|---|
| Acoustics (operator/bystander) at 25o
C (77o
F) |
< 7.1 Bels LwA |
| Operating temperature
(up to 1524 m/5000 ft)*
|
0o
to 35o
C (32o
to 95o
F) |
| Non-operating temperature |
-40o
to 70o
C (-40o
to 158o
F) |
| Maximum rate of temperature change |
20o
C/hour (68o
F/hour) with disc media |
| Operating relative humidity |
15% to 80% RH non-condensing |
| Non-operating relative humidity |
8% to 85% non-condensing |
| Operating altitude above sea level |
3,000 m (10,000 ft) maximum |
| Non-operating altitude above sea level |
4,600 m (15,000 ft) maximum |
|
NOTE:
|
Max operating temperature range up to 900 m (3,000 ft). For higher altitudes de-rate the max temperature by 1° C/1000 ft (300 m) above 900 m (3,000 ft). |
|
Safety Certifications
| Regulatory Compliance
|
|---|
| RMN |
RSVLA-0406 |
| Electromagnetic Interference |
Complies with FCC Rules and Regulations, Part 15 as a Class A digital device. Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL |
| Safety |
CSA Certified, IEC 60950-1 |
Link to Product Overview Information
|
|
Printable version
