HP Integrity rx2620 Server - Specifications

	System Specifications
	Component Specifications
	Physical Specifications
	Electrical Specifications
	Environmental Specifications
	Safety Certifications
	Link to Product Overview Information

System Specifications

Processor and Memory

Supported processors

1.3-GHz Intel Itanium 2 processor

1.6-GHz Itanium 2 processor

System memory

Minimum memory

Maximum memory capacity

Component Specifications

Storage, I/O and Adapters
Internal disks	Maximum disk mechanisms 3 Maximum disk capacity 438 GB
Standard integrated I/O	Ultra320 SCSI-LVD 2 channels 10/100/1000Base-T (RJ-45 connector) 2 port RS-232 serial ports 5 USB 4 10/100Base-T management port (RJ-45 connector) Yes VGA graphics Optional
I/O buses and slots	Total PCI-X/PCI slots 4 All four slots are 133-MHz, 64-bit slots on dedicated PCI-X buses
Maximum mass storage host bus adapters	Ultra160 SCSI–LVD 3 Dual-port Ultra160 SCSI–LVD 3 Smart Array Ultra160 SCSI RAID 3 (only 1 for internal drives) 2-Gb single-port fibre channel 4
Maximum network interface cards	1000Base-SX 4 1000Base-TX 4 10/100Base-TX 4 Dual-port X.25 4 4-port 10/100Base-TX 4 PCI-X Dual Port GigE-TX 4 PCI-X Dual Port GigE-SX 4

Physical Specifications

Rack and Pedestal Dimensions
Rack form factor	Height: 86 mm (3.4 in) / 2U EIA Width: 482 mm (19 in) Depth: 680 mm (26.8 in)
Pedestal form factor	Height: 495 mm (19.5 in) Width: 297 mm (11.7 in) Depth: 672 mm (26.5 in)
Net Weight	Maximum configuration: 25 kg (56 lbs)

Electrical Specifications

Electrical Characteristics
AC input power	100-240 V 50/60 Hz
Hotswap power supplies	1 included, 2nd for N+1
Redundant AC power inputs	1 included, 2nd for N+1
Current requirements at 230 V	4 A (shared across inputs)
Typical maximum power dissipation	600 Watts
Theoretical maximum power dissipation	1,350 Watts
kW rating for UPS loading	1.3
Typical heat dissipation (BTUs/hour)	1,945
Maximum heat dissipation (BTUs/hour)	4,375

Environmental Specifications

Environmental characteristics
Acoustics (operator/bystander) at 25^o C (77^o F)	< 6.8 Bels LwA
Operating temperature (up to 1524 m/5000 ft)^*	5^o to 35^o C (41^o to 95^o F)
Non-operating temperature	-40^o to 70^o C (5^o to 35^o F)
Maximum rate of temperature change	10^o C/hour
Operating relative humidity	15% to 80% RH non-condensing
Non-operating relative humidity	8% to 85% non-condensing
Operating altitude above sea level	3,000 m (10,000 ft) maximum
Non-operating altitude above sea level	4,600 m (15,000 ft) maximum

Safety Certifications

Regulatory Compliance
RMN	RSVLA-0403
Electromagnetic interference	Complies with FCC Rules and Regulations, Part 15 as a Class A digital device. Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL, CCC, BMSI Taiwan
Safety	CSA NRTL Certified, EN 60950-1

Link to Product Overview Information

HP Support document