Figure 1: 130 Series

Print technology

HP Thermal Inkjet

Print technology resolution

HP Color Layering Technology, PhotoREt IV

Print resolution color

Up to 2400 x 1200 dpi

HP Professional Color technologies

Automatic Color Calibration, Automatic Pantone Calibration, Offset simulation and CMYKplus

Lightfastness

Approximately 70 years¹

¹ Preliminary results from tests conducted by Wilhelm Imaging Research, Inc. indicate that prints made with HP No. 85 ink cartridges and HP Premium Plus Photo and Proofing Gloss paper may be displayed indoors under glass for approximately 70 years before noticeable fading and staining will occur.

Ink cartridge colors

Black, cyan, magenta, yellow, light cyan, light magenta

Print speed (using N5 file)

• B/A3-size: Up to 4 min/page (Normal, Glossy)
• B/A3-size: Up to 6 min/page (Best, Glossy)
• D/A1-size: Up to 11.9 min/page (Normal, Glossy)
• D/A1-size: Up to 17.5 min/page (Best, Glossy)

Print margins

• Top (A3) 0.2 inch (5 mm)
• Bottom (A3) 0.47 inch (12 mm) (cut sheet), 0.2 inch (5mm) (roll**)
• Left (A3) 0.2 inch (5 mm)
• Right (A3) 0.2 inch (5 mm)

Media sizes

Letter, legal, tabloid, executive, C, D, C+, D+, envelopes, banners (A1, A1+, A2, A3, A4, B2, B3, B4, A2 metric oversize, A/B/C/D (English architectural), envelopes, banners)

Roll

• Core diameter: 2 inch (5.08 cm)
• External diameter: 3.9 inch (10.9 cm)
• Max Weight: 7lb (3.2 kg)

Media thickness (by paper path)

HP Designjet 130

• Tray 1 - Up to 0.008 inch (0.2 mm); envelopes: up to 0.015 inch (0.4 mm)
• Rear tray - Up to 0.015 inch (0.4 mm)
• Manual sheet feed - Up to 0.008 inch (0.2 mm)

130nr

• Tray 1 - Up to 0.008 inch (0.2 mm); envelopes: up to 0.015 inch (0.4 mm)
• Rear tray - up to 0.015 inch (0.4 mm)
• Manual sheet feed - up to 0.008 inch (0.2 mm)
• Roll media - up to 0.008 inch (0.2 mm)

Media weights (by paper path)

130

• Tray 1 - 17 to 40 lb (65 to 150 g/m2)
• Manual single-sheet feed - 17 to 40 lb (65 to 150 g/m2)
• Rear path - Up to 80 lb (300 g/m2)

130nr

• Tray 1 - 17 to 40 lb (65 to 150 g/m2)
• Manual single-sheet feed - 17 to 40 lb (65 to 150 g/m2)
• Rear path - Up to 80 lb (300 g/m2)
• Roll feed - 17 to 40 lb (65 to 150 g/m2)

Minimum system requirements

Windows :

• Microsoft Windows (98) - Pentium I, 133 MHz,128 MB RAM, 300 MB available hard disk space
• Microsoft Windows NT - Pentium II, 300 MHz, 128 MB RAM, 400 MB available hard disk space
• Microsoft Windows (2000, 2003) - Pentium II, 300 MHz, 128 MB RAM, 400 MB available hard disk space
• Microsoft Windows XP - Pentium III, 733 MHz, 256 MB RAM, 400 MB available hard disk

Macintosh :

• iMac G3, G4, G5 dual processor, iBook, PowerBook, eMac
• Mac (OS 9.1, OS X v 10.1.5), 128 MB RAM, 100 MB available hard disk space

Recommended system requirements

Windows :

• Microsoft Windows (Me) - Pentium II, 300 MHz, 128 MB RAM, 1 GB available hard disk space
• Microsoft Windows NT - Pentium III, 733 MHz, 128 MB RAM, 2 GB available hard disk space
• Microsoft Windows 2000 - Pentium III, 733 MHz, 256 MB RAM, 2 GB available hard disk space
• Microsoft Windows XP - Pentium IV, 1 GHz, 256 MB RAM, 2 GB available hard disk space

Macintosh :

• Dual 1 GHz PowerPC G4, 512 MB RAM

Memory

64 MB

Connectivity

• 130 Standard - USB 1.1 (USB 2.0 compliant), Centronics parallel IEEE-1284 (ECP compliant), one EIO slot
• 130 Optional - HP Jetdirect 615n, 680n, 610n, 600n, 175x, 310x, 380x
• 130nr Standard - USB 1.1 (USB 2.0 compliant), Centronics parallel IEEE-1284 (ECP compliant), 1 EIO slot, HP Jetdirect 615n

Drivers (included)

Raster driver for Mac OS (9.x, X.1, X.2, X.3), PCL 3 GUI Windows driver, Microsoft Windows drivers (98, Me, NT 4.0, 2000, XP) including support for AutoCAD 2000, USB and ECP drivers

Print languages

• Standard - PCL 3-GUI RGB 24-bit Contone
• Optional - Adobe PostScript 3 via software RIP

Product weight

• 130 - 48.5 lb (22 kg)
• 130nr - 50.7 lb (23 kg)

Dimensions (h x d x w)

• 130 - 8.7 x 16.3 x 41.3 inches (220 x 415 x 1050 mm)
• 130nr - 8.7 x 21 x 41.3 inches (220 x 535 x 1050 mm)

Power consumption

65 watts (maximum), 22 watts (standby)

Power supply

Input voltage 100 to 240 VAC (+/- 10%) auto ranging, 50/60 Hz (+/- 3 Hz), 2 amp maximum

Electromagnetic compatibility

Compliance for Class B products, Class A when connected to LANs, EU (EMC Directive), USA (FCC rules), Canada (DoC), Australia (ACA), New Zealand (MoC), China (CCC), Japan (VCCI), Class A for Korea (MIC), Taiwan (BSMI)

Safety

IC 950-compliant, EU LVD and EN60950 compliant, CSA certified for US and Canada, Mexico NOM-1-NYCE, Argentina IRAM, China CCC, Singapore PSB, Russia VNIIS, Poland ELTEST, Korea KETL