» Sign-in with HP Passport | » Register
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
Search:
More options
 
hp.com home


HP Support document

» 

Business Support Center

HP Passport Sign-in

» Sign-in with HP Passport
» Register
» Learn more...

Tasks

» Download drivers and software
» Troubleshoot a problem
» Setup, install, and configure
» Discover and use a product
» Perform regular maintenance
» Upgrade and migrate
» Recycle and dispose
»

Resources

» Customer Self Repair
» Diagnose problem or Chat (HP Instant Support)
» Support Forums
» Guided troubleshooting
» Manuals
» Submit a support case
» See more...
» Help
» Site map
» HP Support Center

HP Deskjet 5550 Series Printers - Replacing the Print Cartridges


Introduction
This document provides information on the following topics for the HP Deskjet 5550 and 5551 printers:
  • Replacing print cartridges.
  • Calibrating print cartridges.
  • Checking the ink level.
Print cartridge part numbers
Use the table below to identify the correct ink cartridge part number:
Ink cartridge Part number
Black HP 56 (C6656A)
Tri-color HP 57 (C6657A)
Photo HP 58 (C6658A)
Replacing the ink cartridges
A print cartridge may need replacing when:
  • Print quality issues cannot be resolved by cleaning the print cartridges.
  • A front-panel display message indicates a print cartridge needs to be replaced.
  • Low ink level.
Follow the instructions below to replace the ink cartridges:
Step Example
1. Press the POWER button to turn on the printer.

5. Remove the replacement print cartridge from its packaging and carefully remove the plastic tape. Hold the print cartridge so that the copper strip is on the bottom.
6. Slide the print cartridge firmly into the cradle. Ensure that the copper contacts of the print cartridge meet the copper contacts of the print cartridge cradle as shown.

7. Close the cradle latch. Pull the latch forward.

8. Verify white paper is loaded in the printer, then close the top cover. The printer automatically prints a calibration page for optimum print quality.
Calibrating the print cartridges
The printer does an automatic calibration whenever a new print cartridge is installed. The printer should be calibrated, however, whenever misalignment is noticed.
Follow the instructions below to calibrate the printer:
Step Instruction
1. Double-click the Printer Assistant icon on your desktop.

2. Select Tools and Updates , Printer Maintenance , then Calibrate Printer to open the Calibrate Printer window.
3. Click Calibrate , the calibration page will print.

Calibrating the print cartridges using the Toolbox
Step Instructions
1. Right-click the taskbar printer icon.
2. Click Open HP Deskjet 5550 Series Toolbox .
3. Select the Device Services tab.
4. Click Calibrate the Device .
Checking the ink level
Step Instructions
1. Right-click the taskbar printer icon.
2. Click Open HP Deskjet 5550 Series Toolbox .
3. Select the Estimated Ink Level tab.

   Content feedback
To help us improve our content, please provide your feedback below.

1. How does the information on this page help you?

   very helpful somewhat helpful not helpful
 

2. Was it easy to find this document?

   easy not easy

3. If you selected not easy for question 2, in which section did you expect to find it?

     

4. Comments:

 
 
- Your feedback will be used to improve our content. Please note this form is for feedback only, so you will not receive a response.
Contact HP if you need technical assistance.

Printable versionPrintable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2013 Hewlett-Packard Development Company, L.P.