 |
» |
|
|
|
|
|
|
|
|
HP Color LaserJet and LaserJet Series Printers - Legacy Product Reference Page
This document provides specifications (see tables) and test/reset information for discontinued (Legacy) HP Personal LaserJet series printers.
|
NOTE:
|
The expected life of the print cartridges is based on five percent coverage on letter-sized paper. |
HP LaserJet III series printer information
HP LaserJet III series printer specifications
| Product
|
Duty Cycle
|
Maintenance Cycle
|
Driver Languages
|
Paper Trays
|
Connectivity
|
Print Cartridges
|
Standard Memory
|
|---|
| HP LaserJet III series printer (C33449A)
|
75,000 ppm |
100,000 pages part number: 33449-67904 |
PCL5e, PostScript® Level 1
*
** |
One 200-sheet paper tray |
"B" parallel and serial cables |
92291A
8,000 pages
9225A
****
4,000 pages |
1 MB |
| HP LaserJet IIID series printer (C33459A)
|
75,000 ppm |
100,000 pages part number: 33449-67904 |
PCL5e, PostScript Level 1
*
** |
Two 200-sheet paper trays, Duplex assembly
*** |
"B" parallel and serial cables |
9225A
****
4,000 pages |
1 MB |
| HP LaserJet IIIP series printer (C33481A)
|
75,000 ppm |
100,000 pages part number: 33449-67904 |
PCL5e, PostScript Level 1
*
** |
One 200-sheet paper tray |
"B" parallel and serial cables |
92275A
*****
3,500 pages |
1 MB |
* Serial numbers prior to 3200JXXXXX require a ROM upgrade to use Level 2.
** Serial numbers 3200JXXXXX require a SIMM upgrade use Level 2.
*** Assembly is built in and requires extra parts for the maintenance kit.
**** This print cartridge can also be used for the HP LaserJet II series printers.
***** This print cartridge can also be used for the HP LaserJet IIP and IIP+ series printers.
HP LaserJet III series printers
Self-test and Configuration page
Press and hold the PRINT FONTS/TEST
key for about five seconds.
Cold reset
Turn off the printer.
Hold the ONLINE
key down while turning on the printer.
Continue to hold the ONLINE
key until the printer reads COLD RESET
, about three seconds.
Release the ONLINE
button. INITIALIZING
will appear, followed by RESTORING FACTORY SETTINGS
, and then the product will enter OFFLINE
status.
Press the ONLINE
key to put the printer back on line.
| CAUTION:
|
A cold reset will return the printer to the factory default settings. The HP Jetdirect card will also reset unless removed. Print the Configuration page or remove the HP Jetdirect card before performing a cold reset to prevent losing any settings.
|
Engine test
Locate the button that is located in the front cover of the printer, it is about 2.5 inches to the right of the lower cassette's upper-right corner. Press this button to perform the Engine Test.
HP LaserJet III/IIID series printer
Self test and Configuration pages
Press the PRINT FONT/TEST
button until 05 TEST
displays.
Continuous self test
Press the PRINT FONT/TEST
button until 04 TEST
displays.
Engine test
Locate the button that is under a removable panel on the bottom right side towards the back of the printer. Press this button to perform the Engine Test.
HP LaserJet IIIP series printer
Self test and Configuration pages
Press the ALT
and ENTER/TEST
buttons until 05 TEST
displays.
Cold reset
Press and hold the ONLINE
button while turning on the printer.
Engine test
Take off the back panel of the printer by removing two screws at the top of each corner. Locate the button that is in the hole toward the top left corner above the serial port. Press this button to perform the Engine Test.
HP LaserJet 4 series printer information
HP LaserJet 4 series printer specifications
| Product
|
Duty Cycle
|
Maintenance Cycle
|
Driver Language
|
Paper Trays
|
Connectivity
|
Print Cartridge
|
Standard Memory
|
|---|
| HP LaserJet 4 series printer (C2001A)
|
75,000 ppm |
200,000 pages (part number C2001-67914) |
PCL5e, PostScript® Level 2 capable* |
One 100-sheet Multi Purpose tray and one 250-sheet Paper Cassette tray |
"B" type parallel cable, serial cable, and M cable |
92298A
6,800 pages
92298X
8,800 pages |
2 MB |
| HP LaserJet 4L series printer (C2003A)
|
75,000 ppm |
No maintenance kit available |
PCL5e, PostScript Level 2 capable* |
One 100-sheet tray |
"B" parallel cable |
92274A
3,000 pages
92298X
8,800 pages |
1 MB |
| HP LaserJet 4ML series printer (C2015A)
|
75,000 ppm |
No maintenance kit available |
PCL5e, PostScript Level 2 capable* |
One 100-sheet tray |
"B" parallel and serial cables |
92274A
3,000 pages |
2 MB |
| HP LaserJet 4P series printer (C2005A)
|
75,000 ppm |
No maintenance kit available |
PCL5e, PostScript Level 2 capable* |
One 250-sheet tray |
"B" parallel and serial cables |
92274A
3,000 pages
92298X
8,800 pages |
2 MB |
| HP LaserJet 4MP series printer (C2040A)
|
75,000 ppm |
No maintenance kit available |
PCL5e, Adobe PostScript Level 2 |
One 250-sheet tray |
"B" parallel and serial cables |
92274A
3,000 pages |
6 MB |
| HP LaserJet 4Si series printer (C2010A)
|
75,000 ppm |
200,000 pages (part number C2062-67901) |
PCL5e, PostScript Level 2 capable* |
Two 500-sheet trays |
"B" parallel and serial cables |
92291A
92274A
3,000 pages |
4 MB |
| HP LaserJet 4SiMX series printer (C2011A)
|
75,000 ppm |
200,000 pages (part number C2062-67901) |
PCL5e, Adobe® PostScript Level 2 |
Two 500-sheet trays |
Ethernet (10BaseT/10Base2) (BNC) J-45 and LocalTalk HP Jetdirect card |
92291A
92274A
3,000 pages |
12 MB |
| HP LaserJet 4M series printer (C2021A)
|
75,000 ppm |
200,000 pages (part number C2001-67914) |
PCL5e, Adobe PostScript Level 2 |
One 100-sheet Multi Purpose tray and one 250-sheet Paper Cassette tray |
"B" type parallel cable, serial cable, and M cable, LocalTalk, Jetdirect (J2341A) |
8,800 pages (part number 92298X)
6,800 pages (part number 92298A) |
6 MB |
| HP LaserJet 4+ series printer (C2037A)
|
75,000 ppm |
200,000 pages (part number C2037-67912) |
PCL5e, PostScript Level 2 capable* |
One 100-sheet Multi Purpose tray and one 250-sheet Paper Cassette tray |
"B" type parallel cable, serial cable, and M cable |
8,800 pages (part number 92298X)
6,800 pages (part number 92298A) |
6 MB |
| HP LaserJet 4M+ series printer (C2039A)
|
75,000 ppm |
200,000 pages (part number C2037-67912) |
PCL5e, Adobe PostScript Level 2 |
One 100-sheet Multi Purpose tray and one 250-sheet Paper Cassette tray |
"B" type parallel cable, serial cable, and M cable, Ethernet, LocalTalk, Jetdirect |
8,800 pages (part number 92298X)
6,800 pages (part number 92298A) |
4 MB |
| HP LaserJet 4V series printer
|
75,000 ppm |
200,000 pages (C3141-69715) |
PCL5e, PostScript Level 2 capable* |
One 100-sheet Multi Purpose tray and one 250-sheet Paper Cassette tray that also supports 11 x 17 �? paper |
"B" type parallel cable |
C3900A
7,500 pages |
4 MB |
| HP LaserJet 4MV series printer (C3142A)
|
75,000 ppm |
200,000 pages (C3141-69715) |
PCL5e, PostScript Level 2 standard |
One 100-sheet Multi Purpose tray and one 250-sheet Paper Cassette tray that also supports 11 x 17" paper |
"B" type parallel cable |
C3900A
7,500 pages |
12 MB |
*Requires add-in PS SIMM
HP LaserJet 4 series printer
Self-test and Configuration pages
Press the ONLINE
key to take the printer to OFFLINE
.
Press the MENU
key until TEST MENU
appears.
Press the ITEM
key until SELF TEST
appears.
Press the ENTER
key. 05 SELF TEST
displays and then the Self-Test page will print.
Continuous Self Test
Press the ONLINE
button to take printer OFFLINE
.
Press the MENU
button until CONTINUOUS SELF TEST
displays.
Press the ITEM
key until SELF TEST
displays.
Press the ENTER
key. 05 SELF TEST
displays and then the Self-Test page will print.
Cold reset
Turn off the printer.
Press and hold the ONLINE
key while turning on the printer.
Continue to hold the ONLINE
key until the printer reads COLD RESET
.
Release ONLINE
. INITIALIZING
appears, then, RESTORING FACTORY SETTINGS
, and then the printer goes into the OFFLINE
status.
Press the ONLINE
key to return the printer to ONLINE
.
| CAUTION:
|
A cold reset will return the printer to the factory default settings. The HP Jetdirect card will also reset unless removed. Print the Configuration page or remove the HP Jetdirect card before performing a cold reset to prevent losing any settings.
|
Engine test
Locate the button that is located in the front cover of the printer; it is about 2.5 inches to the right of the lower cassette's upper right corner. Press this button to perform the Engine Test.
HP LaserJet 4L series printer
Self Test and Configuration pages
Press the front panel button until data light blinks.
Continuous Self test
Disconnect from power.
Press and hold the front panel button while connecting power.
Hold five seconds for the HP LaserJet 4L series printer and 15 seconds for the HP LaserJet 4ML series printer. All lights on the printer will stay lit.
To stop the test:
Press the front panel button until all lights begin to blink in sequence.
Engine test
Open the printer's I/O door. Press the button that is located in the hole under the parallel port to perform the Engine Test.
HP LaserJet 4P series printer
Self Test and Configuration page
Press the ONLINE
key to take the printer offline.
Press the MENU
key until TEST MENU
displays.
Press the ITEM
key until SELF TEST
displays.
Press the ENTER
key, the display will read 05 SELF-TEST
.
Continuous Self-Test
Press the ITEM
key until CONT SELF TEST
displays.
Cold Reset
Turn off the printer.
Press the ONLINE
key while turning on the power.
Continue to hold the ONLINE
Key until 08 COLD RESET
appears.
Release the key, then 05 SELF-TEST
will display. After 30 seconds, 00 OFFLINE
will display, indicating that the cold reset is complete.
Press ONLINE
to return the printer to the READY
state.
Engine test
The HP LaserJet 4P and 4MP series printers do not have a user accessible TEST PRINT
button. Only a service technician can print an engine test. This is a very complicated procedure, and requires the use of a service manual to complete.
HP LaserJet 4V series printer
Self Test and Configuration page
Press the ONLINE
button to take the printer OFFLINE
.
Press the MENU
button until TEST MENU
appears on the display.
Press the ITEM
button until SELF TEST
appears.
Press the ENTER
key.
Continuous Configuration pages
Press the ONLINE
button to take the printer OFFLINE
.
Press the MENU
button until TEST MENU
appears on the display.
Press the ITEM
button until CONTINUOUS SELF TEST
appears.
Press the ENTER
button.
To stop the pages: Press the ONLINE
button.
Cold Reset
Turn off the printer.
Press and hold the ONLINE
button while turning on the printer.
Release the ONLINE
button when 08 COLD RESET
appears on the display and 5 SELF-TEST
will display, followed by 00 OFF LINE
.
Press the ONLINE
button to return to the READY
mode.
Engine Test
The button, labeled TEST PRINT, is located under the MIO slot on the back-center of the printer.
HP LaserJet 5 series printer information
HP LaserJet 5 series printer specifications
| Product
|
Maintenance Cycle
|
Driver Languages
|
Paper Trays
|
Connectivity
|
Print Cartridges
|
Standard Memory
|
|---|
| HP LaserJet 5L series printer (C3941A, C3941B, C3941C)
|
No maintenance kit available |
PCL and Host-based drivers available |
100-sheet (or 10 envelopes) paper input bin |
Type "B" parallel cable |
Part number: C3906A
2,500 pages |
1 MB |
| HP LaserJet 5P series printer
|
No maintenance kit available |
PCL and Host-based drivers available |
One 250-sheet tray |
"B" type parallel cable, "C" type parallel cable, Infrared, LocalTalk |
C3903A
4,000 pages |
2 MB |
| HP LaserJet 5P series printer (C3150A)
|
No maintenance kit available |
PCL and Host-based drivers available |
One 250-sheet tray |
"B" type parallel cable, "C" type parallel cable, Infrared, LocalTalk |
C3903A 4,000 pages |
2 MB |
| HP LaserJet 5MP series printer (C3155A)
|
No maintenance kit available |
PCL and Host-based drivers available, Adobe PostScript Level 2 |
One 250-sheet tray |
"B" type parallel cable, "C" type parallel cable, Infrared, LocalTalk |
C3903A
4,000 pages |
3 MB |
| HP LaserJet 5 series printer (C3916A)
|
200,000 pages (part number C3916-67912) |
PCL and Host-based drivers |
One 250-sheet tray |
"B" type parallel cable, Serial cable, Infrared |
92298A
6,800 pages
92298X
8,800 pages |
2 MB |
| HP LaserJet 5M series printer (C3917A)
|
200,000 pages (part number C3916-67912) |
PCL and Host-based drivers, Adobe PostScript Level 2 capable |
One 250-sheet tray |
"B" type parallel cable, Serial cable, Infrared, Ethernet/LocalTalk, Jetdirect (J4100-61001) |
92298A
6,800 pages
92298X
8,800 pages |
4 MB |
| HP LaserJet 5N series printer (C3952A)
|
200,000 pages (part number C3916-67912) |
PCL and Host-based drivers |
One 250-sheet tray |
"B" type parallel cable, Serial cable, Infrared, Ethernet/LocalTalk, Jetdirect (J4100-61001) |
92298A
6,800 pages
92298X
8,800 pages |
2 MB |
HP LaserJet 5L series printer
Self Test and Configuration page
Press the FRONT
button.
Continuous Self-Test
Turn off the printer.
Press the FRONT
button while turning on the printer.
Hold the FRONT
button until all lights blink in sequence.
To stop the test, hold the FRONT
button until all lights blink in sequence.
Cold reset
Press the FRONT PANEL
button until all lights blink in sequence.
Engine test
The engine test is located under the lower paper output, on the front bottom-middle of the printer.
HP LaserJet 5P series printer
Self Test and Configuration page
Press the GO
and the RESET/JOB CANCEL
buttons while printer is in READY
mode.
Cold reset
Press and hold the RESET/JOB CANCEL
button less than
ten seconds after turning on the printer.
Engine test
Remove the I/O door.
Remove the left side cover.
Press the button that is located in the first hole from the bottom on the side of the formatter cover.
HP LaserJet 5/5M/5N series printers
Self Test and Configuration page
Press the GO
button to take the Printer OFFLINE
.
Press the MENU
button until TEST MENU
shows in the display.
Press the ITEM
button until PRINT SELF TEST
displays.
Press the SELECT
button, 05 SELF TEST
displays, and the test page will print.
Continuous Self Test
Press the GO
button to take the printer OFFLINE
.
Press the MENU
button until TEST MENU
shows in the display.
Press the ITEM
button until CONTINUOUS SELF TEST
displays.
Press the SELECT
button, 05 SELF-TEST
displays, and the test page will print.
Cold Reset
Turn off the printer.
Press and hold the GO
button while turning on the printer.
Release the GO
button after COLD RESET
displays.
| CAUTION:
|
A cold reset will return the printer to the factory default settings. The HP Jetdirect card will also reset unless removed. Print the Configuration page or remove the HP Jetdirect card before performing a cold reset to prevent losing any settings.
|
Engine Test
The button is located on the inside right of the MP tray.
HP LaserJet 6 series printer information
HP LaserJet 6 series printer specifications
| Product
|
Maintenance Cycle
|
Driver Languages
|
Paper Trays
|
Connectivity
|
Print Cartridges
|
Standard Memory
|
|---|
| HP LaserJet 6L series printer (C3990A)
|
No maintenance kit available |
PCL and Host-based drivers available |
100-sheet (or 10 envelopes) paper input bin |
Type "B" parallel cable |
Part number: C3906A
2,500 pages |
1 MB |
| HP LaserJet 6P series printer - Standard
|
No maintenance kit available |
PCL and Host-based drivers available |
One 250-sheet tray |
"B" type parallel cable, "C" type parallel cable, Infrared, LocalTalk |
C3903A
4,000 pages |
2 MB |
| HP LaserJet 6P series printer (C3980A)
|
No maintenance kit available |
PCL and Host-based drivers available |
One 250-sheet tray |
"B" type parallel cable, "C" type parallel cable, Infrared, LocalTalk |
C3903A
4,000 pages |
2 MB |
| HP LaserJet 6MP series printer (C3982A)
|
No maintenance kit available |
PCL and Host-based drivers available, Adobe PostScript Level 2 |
One 250-sheet tray |
"B" type parallel cable, "C" type parallel cable, Infrared, LocalTalk |
C3903A
4,000 pages |
3 MB |
HP LaserJet 6L series printer
Self Test and Configuration page
Press the FRONT
button.
Continuous Self-Test
Turn off the printer.
Press and hold the FRONT PANEL
button while turning on the printer.
Continue to hold the FRONT PANEL
button until all lights blink in sequence.
To stop the test, hold the FRONT PANEL
button until all lights blink in sequence.
Cold reset
Hold down the FRONT PANEL
button until all lights blink in sequence.
Engine test
Locate the button that is under the lower paper output bin, on the front bottom-middle of the printer. Press this button to perform the Engine Test.
HP LaserJet 6P series printer
Self Test and Configuration page
Press the GO
and RESET/JOB CANCEL
buttons while the printer is in READY
Mode.
Cold Reset
Turn on the printer.
Hold the RESET/JOB CANCEL
button for less than
ten seconds.
Engine test
| CAUTION:
|
This procedure requires that the Formatter and Formatter Cover be removed. An authorized service provider should only perform it.
|
Remove the I/O door.
Remove the left side cover.
Remove the formatter cover.
Remove the formatter.
Press the button that is located in the top of the irregular shaped hole on the back-bottom of the left side.
HP LaserJet 1100 series printer information
HP LaserJet 1100 series printer specifications
| Product
|
Maintenance Cycle
|
Paper Trays
|
Accessories
|
Connectivity
|
Print Cartridges
|
Standard Memory
|
|---|
| HP LaserJet 1100 series printer standard
|
No maintenance kit available |
100-sheet capacity paper input bin |
Optional Scanning Unit (part number R37-5000-000CN |
Type "C" parallel cable |
Part number: C4092A
2,500 pages |
2 MB |
| HP LaserJet 1100 series printer (C4224A, C4225A, C4226A)
|
No maintenance kit available |
100-sheet capacity paper input bin |
Optional Scanning Unit (part number R37-5000-000CN) |
Type "C" parallel cable |
Part number: C4092A
2,500 pages |
2 MB |
| HP LaserJet 1100A series printer
|
No maintenance kit available |
100-sheet capacity paper input bin |
Scanning Unit (part number R37-5000-000CN) |
Type "C" parallel cable |
Part number: C4092A
2,500 pages |
2 MB |
HP LaserJet 1100 series printer
Self Test and Configuration page
Press the GO
button.
Cold Reset
Unplug the printer power.
Plug back in the power.
Engine Test
Lift the memory door on the back of the printer.
Press the engine test button that is located right above the right corner of the memory slot to perform the Engine Test.
HP LaserJet 2100 series printer information
HP LaserJet 2100 series printer specifications
| Product
|
Maintenance Cycle
|
Driver Languages
|
Paper Trays
|
Connectivity
|
Print Cartridges
|
Standard Memory
|
|---|
| HP LaserJet 2100 series printer - standard
|
200,000 pages (part number H3974-60001) |
PCL and Host-based drivers |
One 250-sheet tray |
Type "B" parallel cable, Infrared, LocalTalk |
Part number: C4096A
5,000 pages |
4 MB |
| HP LaserJet 2100 series printer (C4138A, C4139A)
|
200,000 pages (part number H3974-60001) |
PCL and Host-based drivers |
One 250-sheet tray |
Type "B" parallel cable, Infrared, LocalTalk |
Part number: C4096A
5,000 pages |
4 MB |
| HP LaserJet 2100M series printer (C4171A)
|
200,000 pages (part number H3974-60001) |
PCL and Host-based drivers, Adobe PostScript Level 2 |
One 250-sheet tray |
Type "B" parallel cable, Infrared, LocalTalk |
Part number: C4096A
5,000 pages |
8 MB |
| HP LaserJet 2100TN series printer (C4172A)
|
200,000 pages (part number H3974-60001) |
PCL and Host-based drivers, Adobe PostScript Level 2 |
Two 250-sheet trays |
Type "B" parallel cable, Infrared, LocalTalk, Ethernet (10BaseT) RJ-45 only Jetdirect (J3110A) |
Part number: C4096A
5,000 pages |
8 MB |
HP LaserJet 2100 series printer
Self Test page
Press the GO
button when printer is in the READY
state.
Configuration page
Press and release the GO
and JOB CANCEL
buttons simultaneously.
Cold Reset
Turn off the printer.
Remove the HP Jetdirect card (if applicable).
Press the RESET/JOBCANCEL
button and turn on the printer.
Release the RESET/JOBCANCEL
button in less than
ten seconds.
Engine Test
Locate the button that is located under the bottom left of the rear door. Press the button to perform and Engine Test.
HP LaserJet 3100 series printer information
HP LaserJet 3100 series printer specifications
| Product
|
Maintenance Cycle
|
Driver languages
|
Paper trays
|
Connectivity
|
print cartridges
|
Standard memory
|
|---|
| HP LaserJet 3100 Series Printer - Standard (print/scan/fax)
|
No maintenance kit available |
Host-based driver with PCL4 and MS-DOS Emulation |
100-sheet capacity paper input bin |
Type "C" parallel cable |
Part number: C3906A
2,500 pages |
2 MB |
| HP LaserJet 3100 series printer (C4175A, C4177A)
|
No maintenance kit available |
Host-based driver with PCL4 and MS-DOS Emulation |
100-sheet capacity paper input bin |
Type "C" parallel cable |
C3906A
2,500 pages |
2 MB |
HP LaserJet 3100 series printer
Self Test page
Press the ENTER/MENU
button.
Use the <
or >
button to select REPORTS
.
Press the ENTER/MENU
button.
Use the <
or >
button to select SELF TEST
.
Press the ENTER/MENU
button.
Configuration page
Press the ENTER/MENU
button.
Use the <
or >
button to select REPORTS
.
Press the ENTER/MENU
button.
Use the <
or >
button to select CONFIG REPORT
.
Press the ENTER/MENU
button.
Cold Reset
Unplug the printer power cable.
Plug in the printer power cable. This will clear the buffers.
Go into service mode to delete the saved files on the printer (for example; phone book, soft switches, etcetera).
Engine Test
Squeeze the engine test switch on the bottom front-left of the printer by the rubber foot.
HP LaserJet 3150 series printer information
HP LaserJet 3150 series printer specifications
| Product
|
Maintenance Cycle
|
Driver Languages
|
Paper Trays
|
Connectivity
|
Print Cartridges
|
Standard Memory
|
|---|
| HP LaserJet 3150 series printer (C4256A)
|
No maintenance kit available |
Host-based driver with PCL Level 4 and MS-DOS emulation |
One 100-sheet paper input tray |
IEEE -1284 certified type "C" parallel cable |
C3906A
2,500 pages |
2 MB |
| HP LaserJet 3150xi series printer (C7082A - US Only)
|
No maintenance kit available |
Host-based driver with PCL Level 4 and MS-DOS emulation |
One 100-sheet paper input tray |
IEEE -1284 certified type "C" parallel cable |
C3906A
2,500 pages |
2 MB |
| HP LaserJet 3150se series printer (C7083A - US Only)
|
No maintenance kit available |
Host-based driver with PCL Level 4 and MS-DOS emulation |
One 100-sheet paper input tray |
IEEE -1284 certified type "C" parallel cable |
C3906A
2,500 pages |
2 MB |
HP LaserJet 3150 series printer
Self Test page
Press the ENTER/MENU
button.
Use the <
or >
button to select REPORTS
.
Press the ENTER/MENU
button.
Use the <
or >
button to select SELF TEST
.
Press the ENTER/MENU
button.
Configuration page
Press the ENTER/MENU
button.
Use the <
or >
button to select REPORTS
.
Press the ENTER/MENU
button.
Use the <
or >
button to select PRINT CONFIG REPORT
.
Press the ENTER/MENU
button.
Cold Reset
Unplug the printer power cable.
Plug in the printer power cable. This will clear the buffers.
Go into Service Mode to delete the saved files on the printer (for example; phone book, soft switches, etcetera).
Engine Test
Squeeze the engine test switch on the bottom front-left of the printer by the rubber foot.
|
|
Printable version
