 |
» |
|
|
|
|
|
|
|
|
HP LaserJet 4050 Printer series - Product Specifications
Introduction
This document lists the specifications for the HP LaserJet 4050 printer.
Model numbers
| Printer
|
Model Number
|
|---|
| HP LaserJet 4050 printer
|
C4251A
|
| HP LaserJet 4050 N printer
|
C4253A
|
| HP LaserJet 4050 T printer
|
C4252A
|
| HP LaserJet 4050 TN printer
|
C4254A
|
| HP LaserJet 4050 SE printer
|
C4255A
|
| HP LaserJet 4050 USB-Mac printer
|
C7829B
|
Serial number location
The model number and printer serial number are listed on an identification label located under the top cover on the right side of the printer.
Printer description
Quick and easy to install, this printer provides fast, high-quality printing with ProRes 1200 for outstanding graphics, and up to 220 levels of gray for smooth, photo-like images. The printer features an online help system, and has an expandable design for increased printing flexibility.
Printer features
Speed and throughput
Instant-on fuser prints the first page in 15 seconds.
Prints letter-size paper 17 pages per minute (ppm) or A4-size paper 16 ppm
"RIP ONCE" capability with 16 MB or hard disk option
Resolution
FastRes 1200 for faster printing
ProRes 1200 for better graphics
Up to 220 levels of gray for smooth, photo-like images
HP precision toner for clear, sharp output
Language and fonts
HP PCL 6, PCL 5e, and PostScript (R) Level 2 emulation
110 fonts for Microsoft (R) Windows, plus HP FontSmart
Expandable design
500-sheet universal paper tray, 75-envelope power feeder, and duplex printing accessory available
Flash storage for forms, fonts, and signatures
Memory can be expanded up to 192 MB
Two EIO slots for connecting to networks or additional devices
Jetsend enabled
Printer specifications
| Characteristic
|
Description
|
|---|
| Speed
|
17 pages per minute (ppm)
133 MHz RISC microprocessor
First page out = 15 seconds
"RIP ONCE" capability with 16 MB or hard disk option
|
| Resolution
|
300 dpi with PCL5e/HP's PostScript Level 2 emulation (PS)
600 dpi with PCL5e/PS
HP FastRes 1200 (PCL6, PS)
HP ProRes 1200 at engine speed (17 ppm) (PCL6, PS)
|
| Typefaces
|
100 Scalable TrueType (80 built-in, 30 via HP FontSmart)
Euro symbol
|
| Memory Options
|
8 MB SDRAM standard (4050/4050 T)
16 MB SDRAM standard (4050 N/ 4050 TN)
Optional Memory:
4, 8, 16, MB EDO DIMMs
4, 8, 16, 32, 64 MB SDRAM DIMMs
|
| Mass Storage Options
|
2 and 4 MB Flash DIMMs Greater than 1 GB hard disk
|
| Expansion Slots
|
3 100-pin DIMM slots
2 enhanced I/O (EIO) slots
|
| Interface
|
Bidirectional IEEE 1284-compliant parallel port
CJ3113A - 10/100Base-TX RJ-45 Jet Direct Card (bundled with 4050 N/4050 TN)
(FIR) HP Fast InfraRed Receiver (standard on the 4050 N/4050 TN)
(optional on the 4050/4050T)
RS232 9-pin serial port
Paper Handling Connector (PHC)
|
| Optional Networking
|
10Base-T and 10Base-2
10/100Base-TX
Token Ring
LocalTalk
|
| Paper Trays
|
100-sheet Tray 1
Size: 76 x 127 mm to 216 x 356 mm (3 x 5 inches to legal)
500-sheet Tray 2 (4050/4050 N)
Size: letter, legal, A4
250-sheet Trays 2 and 3 (4050 T/4050 TN)
Size: letter, A4, executive, legal, B5 (ISO), B5 (JIS), A5
Optional 500-sheet Universal Tray
Supports standard and custom sizes from 149 x 210 mm (5.8 x 8.2 inches) to 216 x 356 mm (8.5 x 14 inches)
|
| Paper Path
|
Straight through from Tray 1 to Rear Output Bin or to Top Output Bin
|
| Output Capacity
|
250-sheet Top Output Bin
50-sheet Rear Output Bin
|
| Paper Handling Options
|
Duplexer, Envelope Feeder, Optional 500-sheet Universal Tray Assembly
|
| Duty Cycle
|
Up to 65,000 pages-per-month
|
System requirements
Windows 3.1x
The minimum system requirements for users running Windows 3.1x are:
Windows 3.1x or Windows for Workgroups 3.1x
MS-DOS (R) 5.0 or greater
386 processor or greater
4 MB RAM
4 MB available disk space
For full functionality, a network service should be installed. An IEEE-1284-compliant parallel cable and/or an HP Jetdirect card are also recommended.
Windows 9X
The minimum system requirements for users running Windows 9x are:
Windows 95 or Windows 98
386 processor or greater
8 MB RAM, 16 MB recommended
4 MB available disk space
For full functionality, a network service should be installed. An IEEE-1284-compliant cable and/or an HP Jetdirect card are also recommended.
Windows NT 4.0
The minimum system requirements for clients running Windows NT 4.0 Workstation are:
32-bit x 86-based microprocessor (such as Intel 80386/25 or higher) and Intel Pentium (R)
VGA or higher resolution
8 MB free hard disk space
12 MB RAM; 16 MB recommended
Network adapter card recommended
Physical specifications
| Characteristic
|
HP LaserJet 4050/4050 N
|
HP LaserJet 4050 T/4050 TN
|
|---|
| Height
|
34.3 cm (13.3 inches)
|
38.5 mm (15.5 inches)
|
| Width
|
39 cm (15.4 inches)
|
39 cm (15.4 inches)
|
| Depth
|
61.64 cm (24.27 inches)
|
61.64 cm (24.27 inches)
|
| Depth (trays/rear output bin open)
|
100.76 cm (39.67 inches)
|
100.76 cm (39.67 inches)
|
| Weight (without print cartridge)
|
17.85 kg (39.27 lbs.)
|
20.71 kg (45.66 lbs.)
|
Electrical specifications
| Printer State
|
Power Consumption (average, in watts)
|
|---|
| Printing
|
330
|
| Standby
|
22
|
PowerSave
(default activation time,
30 minutes)
|
20
|
| Off
|
0
|
Minimum recommended circuit capacity
| Voltage
|
Amps
|
|---|
| 100-127 Volts
|
8 amps
|
| 220-240 Volts
|
4 amps
|
Power requirements (acceptable line voltage)
| Voltage
|
Hz
|
|---|
| 100-127 Volts
|
50-60 Hz
|
| 220-240 Volts
|
50-60 Hz
|
Environmental specifications
| Condition
|
Specification
|
|---|
| Operating Temperature
|
10 to 32 degrees C
50 to 90 degrees F
|
| Relative Humidity
|
20% to 80%
|
Acoustic emissions (per ISO 9296)
| Condition
|
Specification
|
|---|
| Printing, 17 ppm
|
LWAd = 6.6 bels (A)
|
| Printing, 8 ppm
|
LWAd = 6.2 bels (A)
|
| PowerSave
|
LWAd = 0 bels (A)
|
Warranty
| Product
|
Duration of Warranty
|
|---|
| HP LaserJet 4050, 4050 N, 4050 T, 4050 TN
|
1 year, return to HP or Authorized Dealer
|
| HP Print Cartridge
|
Coverage lasts until the HP toner is depleted; at which time the warranty expires.
|
Safety certifications
| Certification
|
Description
|
|---|
| Safety:
|
IEC 950:1991+A1+A2+A3 / EN 60950:1992+A1+A2+A3+A4+A11
IEC 825-1:1993 / EN 60825-1:1994 Class 1 (Laser/LED)
|
| EMC:
|
CISPR 22:1993+A1 / EN 55022:1994 Class B (1)
EN 50082-1:1992
IEC 801-2:1991 / prEN 55024-2:1992 -
IEC 801-3:1984 / prEN 55024-3:1991 -
IEC 801-4:1988 / prEN 55024-4:1992 -
|
4 kV CD, 8 kV AD
4 V/m
0.5 kV Signal Lines
1.0 kV Power Lines
|
IEC 1000-3-2:1995 / EN61000-3-2:1995
IEC 1000-3-3:1994 / EN61000-3.3:1995
FCC Title 47 CFR, Part 15 Class B (2)) / ICES-003, Issue 2 / VCCI-2 (1))
AS / NZS 3548:1992 / CISPR 22:1993 Class B (1))
|
Supplementary Information:
The product herewith complies with the requirements of the following Directives and carries the CE-marking accordingly:
the EMC directive 89/336/EEC
the Low-Voltage Directive 73/23/EEC
[1] The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
[2] This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
|
|
|
Printable version
