Contextual Wrapper

Windows

Operating system	Feature	Minimum system requirements
Microsoft Windows XP (32-bit and 64-bit)	Processor	Pentium 233 MHz processor
	RAM	512 MB
	Free disk space	350 MB
	Browser	Internet Explorer 7.0
Microsoft Windows Vista (Starter Edition, 32-bit, and 64-bit)	Processor	1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
	RAM	1 GB (32-bit) or 2 GB (64-bit)
	Free disk space	920 MB
	Browser	Internet Explorer 7.0
Microsoft Windows 7 (32-bit and 64-bit)	Processor	1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
	RAM	1 GB (32-bit) or 2 GB (64-bit)
	Free disk space	920 MB
	Browser	Internet Explorer 8.0

Mac

Operating system	Minimum system requirements
Mac OS X v10.4, v10.5, v10.6, and Higher	Processor: PPC and Intel Core Processor Macs

Click this link, HP Home & Home Office Store (US only), and then click Ink Toner & Paper to purchase cartridges or check cartridge compatibility for your printer.

If you are located outside of the US, follow these steps to purchase cartridges using HP SureSupply.

1. Click this link, HP SureSupply .
2. Scroll to the bottom of the page and make sure that the country or region location is correct.

Which cartridges you use depends on your country or region. Follow these steps to purchase cartridges or check cartridge compatibility for your printer using HP SureSupply.

1. Click this link, HP SureSupply .
2. Scroll to the bottom of the page and make sure that the country or region location is correct.

Contextual Wrapper

Paper tray capacities

The following table lists the capacities of the input tray, output bin, and the Automatic Document Feeder (ADF).

Tray	Paper type	Paper specifications	Quantity
Input tray	Paper	60 g/m2 (16 lb) bond to 163 g/m2 (43 lb) bond	150 sheets
	Envelopes	60 g/m2 (16 lb) bond to 90 g/m2 (24 lb) bond	Up to 10 envelopes
	Transparencies	Minimum 0.13 mm (0.005 in) thick	Up to 75 transparencies
Output bin	Paper	75 g/m2 (20 lb) bond	Up to 100 sheets
	Envelopes	Less than 60 g/m2 (16 lb) bond to 90 g/m2 (24 lb) bond	Up to 10 envelopes
	Transparencies	Minimum 0.13 mm (0.005 in) thick	Up to 75 transparencies
Automatic Document Feeder (M1210 and HotSpot M1218nfs series only)	Paper	60 g/m2 (16 lb) bond to 90 g/m2 (24 lb) bond	Up to 35 sheets

Supported paper type and size for the input tray

Use the following paper types and sizes in the input tray.

Type	Size
Paper	Letter:216 x 279 mm (8.5 x 11 inches)
	Legal: 216 x 356 mm (8.5 x 14 inches)
	A4: 210 x 297 mm (8.27 x 11.69 inches)
	Executive: 184 x 267 mm (7.24 x 10.51 inches)
	A5: 148 x 210 mm (5.83 x 8.27 inches)
	A6: 105 x 148 mm (4.13 x 5.83 inches)
	B5 (JIS): 182 x 257 mm (7.17 x 10.12 inches)
	16k: 197 x 273 mm (7.75 x 10.75 inches) 195 x 270 mm (7.68 x 10.62 inches) 184 x 260 mm (7.24 x 10.23 inches)
	Custom: Minimum: 76 x 127 mm (3 x 5 in) Maximum: 216 x 356 mm (8.5 x 14.0 in)
Envelopes	#10: 105 x 241 mm (4.13 x 9.49 inches)
	DL: 110 x 220 mm (4.33 x 8.66 inches)
	C5: 162 x 229 mm (6.93 x 9.84 inches)
	B5: 176 x 250 mm (6.7 x 9.8 inches)
	Monarch: 98 x 191 mm (3.9 x 7.5 inches)
Postcards	Postcard (JIS): 100 x 148 mm (3.94 x 5.83 inches)
	Double postcard (JIS): 148 x 200 mm (5.83 x 7.87 inches)

Supported paper type and size for the Automatic Document Feeder

Use the following paper types and sizes in the Automatic Document Feeder (ADF).

Type	Size
Paper	Letter: 216 x 279 mm (8.5 x 11 inches)
	Legal: 216 x 356 mm (8.5 x 14 inches)
	A4: 210 x 297 mm (8.27 x 11.69 inches)
	Executive: 184 x 267 mm (7.24 x 10.51 inches)
	A5: 148 x 210 mm (5.83 x 8.27 inches)
	A6: 105 x 148 mm (4.13 x 5.83 inches)
	B5 (JIS): 182 x 257 mm (7.17 x 10.12 inches)
	16k: 197 x 273 mm (7.75 x 10.75 inches) 195 x 270 mm (7.68 x 10.62 inches) 184 x 260 mm (7.24 x 10.23 inches)
	Custom: Minimum: 76 x 127 mm (3 x 5 in) Maximum: 216 x 356 mm (8.5 x 14.0 in)

WARNING:

Power requirements are based on the country/region where the product is sold. Do not convert operating voltages. Doing so might damage the product and void the product warranty.

Recommended operating conditions

• Temperature: 10° to 32.5°C (50° to 91°F)
• Relative humidity: 10% to 80%

Storage conditions

• Temperature: 0° to 35°C (32° to 95°F)
• Relative humidity: 10% to 80%

Energy Star

Energy usage drops significantly while in ENERGY STAR mode, which saves natural resources, and saves money without affecting the high performance of this product. This product qualifies for ENERGY STAR, which is a voluntary program established to encourage the development of energy-efficient office products.

ENERGY STAR is a U.S. registered mark of the U.S. EPA. As an ENERGY STAR partner, Hewlett-Packard Company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. For more information, go to www.energystar.gov .

To view Material Safety Data Sheets (MSDS), go to http://www.hp.com/go/msds (in English).

Ozone production

This product generates no appreciable ozone gas (O3).

Paper and plastic use

This product is suited for the use of recycled paper according to DIN 19309. Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product's life.

Recycling program

FCC compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it might cause harmful interference to radio communications. However, there is no guarantee that interference does not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correcting the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect equipment to an outlet on a circuit different from that to which the receiver is located.
• Consult a dealer or an experienced radio/TV technician.