 |
» |
|
|
|
|
|
|
|
|
HP Color LaserJet CP4020/CP4520 and CP3525 Printer Series - Product Comparison
|
NOTE:
|
The CP4025/CP4525 Series of products will replace the Color LaserJet 4700 and the CP4005 series of products. |
|
|
Color LaserJet CP3525
|
Color LaserJet CP4025 and CP4525
|
|---|
| Model numbers
|
CP3525,CP3525n,
CP3525dn,CP3525x
|
CP4025n, CP4025dn
CP4525n,CP4525dn, CP4525xh
|
| Product numbers
|
CC468A,CC469A,
CC470A,CC471A
|
CC489A,CC490A
CC493A, CC494A,
CC495A
|
| Speed
|
30ppm |
35ppm, 42/40ppm(ltr/A4) |
| RMPV
|
1.5 – 5K |
4025 2 – 7.5K
4525 2.5 – 10K |
| Tray2 capacity
|
250 |
500 |
| Output bin
|
250 |
500 |
| Cartridge capacities |
3K starter cartridges
7K CMY, 5K K
|
No starter cartridges
11K CMY, 8.5/17K K¹
|
| TCU
|
Typical life 36K² |
Typical life 36K² |
| ITB
|
Life of product |
Replace @150K; new ITB flag resets counter as soon as ITB is installed |
| Fuser
|
Life of product³ |
Replace @150K ;fusible link blows after 100 pages to reset life counter |
| Consumables messaging
|
Order / replace |
CLT2.0 – low/ very low |
| Postcard Media insert
|
Requires tray3 for support |
Supported in tray2 |
| Optional Trays
|
Tray3 -500 sheet paper & heavy media tray |
3x500 tray3,4,5 paper feeder and stand
1x500 tray3 paper feeder and cabinet
|
| Supplies – CYM cartridges
|
CE251A, CE252A, CE253A |
CE261A, CE262A, CE263A |
| Supplies – K cartridge(s)
|
CE250A, CE250X
|
CE260A, CE260X |
| Supplies – TCU
|
CE254A |
CE265A |
| Supplies – Transfer Kit
|
n/a |
CE249A |
| Supplies – Fuser kit 110v
|
CE484A³ |
CE246A |
| Supplies – Fuser kit 220v
|
CE506A³ |
CE247A |
| CSRs
|
Formatter, HDD, DIMMS, fuser, ITB, 2nd
transfer roller, 2nd transfer assy, duplex reverse guide, front door, tray2/3 rollers kit, TCU, tray3, tray2, control panel overlays |
SAME, except the following are NOT CSR:
- 2nd transfer assy
- Duplex reverse guide (n/a)
- Front door
- Control panel overlays (n/a)
Tray1 roller is CSR |
| Media sensor
|
No |
Yes |
| Tray2 size sensing
|
No |
Automatic |
| Auto navigation
|
No |
Yes |
| Control panel
|
Localized |
New ICONS – no localization |
| Tray2 jam clearance
|
Hinged access plate |
Cassette guide assembly Requires #2 Phillips to remove |
| Tray1 pick roller
|
Service part |
CSR |
| Tray2 rollers
|
Pick roller and separation roller4
|
Pick roller lasts life of product; feed and sep rollers replaced at 150K with Transfer Kit |
| Duplex path
|
On right door |
On back of 2nd
transfer |
| 2nd transfer roller
|
Driven by gear on ITB |
Not driven |
¹CE260X 17K K not supported on CP4025.
²Life of TCU depends on images, media, and environment.
³Fuser PM kit available for early wear out due to short jobs or narrow media.
4
Separation roller assy requires #2 Phillips
|
|
Printable version
