 |
» |
|
|
|
|
|
|
|
|
HP Color LaserJet 4600 Series Printer - Product Features and Specifications
Overview
Figure 1: HP Color LaserJet 4600 Series Printers
| Printer model
|
Model number
|
|---|
| HP color LaserJet 4600 series printer
|
C9660A
|
| HP color LaserJet 4600dn series printer
|
C9661A
|
| HP color LaserJet 4600dtn series printer
|
C9662A
|
| HP color LaserJet 4600hdn series printer
|
C9663A
|
Product Features
This printer combines the quality and reliability of Hewlett-Packard printing with the features listed below.
| Feature
|
Characteristics
|
|---|
| Performance
|
* 17 pages per minute (PPM) for letter size paper and 16 PPM for A4 size paper.
* Prints on Color LaserJet transparencies and glossy paper.
|
| Memory
|
* 96 megabytes (MB) of synchronous dynamic random access memory (SDRAM) (160 MB in the HP Color LaserJet 4600dtn and 4600hdn series printers).
* Can be expanded to 512 MB (The maximum usable and recognizable RAM configuration is 416 MB).
* Optional hard disk drive (included with the HP Color LaserJet 4600hdn sries printer).
|
| User interface
|
* Graphic display on control panel.
* Enhanced Help with animated graphics.
* Embedded Web server to access support and order supplies (network-connected printers).
|
| Supported printer personalities
|
* HP PCL 6.
* HP PCL 5c.
* PostScript Level 3 emulation.
* Automatic language switching.
|
| Storage features
|
* Job retention (for printers with hard disks).
* Fonts and forms.
* Personal identification number (PIN) printing.
|
| Feature
|
Characteristics
|
| Environmental features
|
* PowerSave setting.
* High content of recyclable components and materials.
* Energy Star compliant.
* Blue Angel compliant.
|
| Fonts
|
* 80 internal fonts available for both PCL and PostScript emulation.
* 80 printer-matching screen fonts in TrueType format available with the software solution.
* Supports forms and fonts on the disk using HP Web Jetadmin.
|
| Paper handling
|
* Prints on media from 77 x 127 mm (3 x 5 inches) up to legal size.
* Prints on media with weights from 60 to 163 g/m 2 (16 to 44 pound bond).
* Prints on a wide range of media types including glossy, labels, overhead transparencies, and envelopes.
* Multiple gloss levels.
* A 500-sheet paper feeder (Tray 2) that supports letter-, legal-, executive-, JIS B5-, A4-, and A5-sized and custom media.
* Optional 500-sheet paper feeder (Tray 3) that supports letter-, legal-, executive-, JIS B5-, A4-, and A5-sized and custom media; standard on HP Color LaserJet 4600dtn and 4600hdn series printers.
* Automatic Two-sided (duplex) printing on HP Color LaserJet 4600dn, 4600dtn, and 4600hdn series printers.
* 250-sheet facedown output bin.
|
| Feature
|
Characteristics
|
| Accessories
|
* Printer hard disk, which provides storage for fonts and macros as well as job storage; standard on HP Color LaserJet 4600hdn series printers.
* Dual inline memory modules (DIMM).
* Printer stand.
* Optional 500-sheet paper feeder (Tray 3) that supports letter-, legal-, executive-, JIS B5-, A4-, and A5-sized media; standard on HP Color LaserJet 4600dtn and 4600hdn series printers.
* Flash DIMM.
* Fast InfraRed (FIR) pod. |
| Connectivity
|
* Optional enhanced input/output (EIO) network card; standard on HP Color LaserJet 4600dn, 4600dtn, and 4600hdn series printers.
* FIR connection.
* HP Web Jetadmin software.
* Standard bidirectional parallel cable interface (IEEE-1284 compliant).
|
| Supplies
|
* Supplies status page contains information on toner level, page count, and estimated pages remaining.
* No-shake cartridge design.
* Printer checks for authentic HP print cartridges at cartridge installation.
* Internet-enabled supply-ordering capabilities (using embedded Web server or printer Status and Alerts software).
|
Physical dimensions
| Dimensions
|
HP Color LaserJet 4600
series printer
|
HP Color LaserJet 4600 series printer with optional Tray 3
|
|---|
| Height
|
566 mm (22.30 inches)
|
654 mm (25.77 inches)
|
| Width
|
456 mm (17.97 inches)
|
456 mm (17.97 inches)
|
| Depth
|
480 mm (18.91 inches)
|
480 mm (18.91 inches)
|
| Weight (with supplies)
|
Approximately 36.3 kg (80.03 lb)
|
Approximately 43.8 kg (96.56 lb)
|
Supported operating systems
Microsoft Windows 95, 98, and Me
Microsoft Windows NT 4.0
Microsoft Windows 2000 and Windows XP
Apple Macintosh OS, version 8.6 to 9.xx, 10.1 or later
Minimum system requirements
-
Windows 95 (basic functions only) and 98: Pentium 90 with 16 MB RAM
Windows Me: Pentium 150 with 32 MB RAM
Windows NT 4.0: Pentium 90 with 32 MB RAM
Windows 2000: 133 MHz processor with 64 MB RAM
Windows XP: 233 MHz processor with 64 MB RAM
180 MB free hard disk space for Windows computers; 160 MB for Macintosh computers
Mac OS 8.6, 9.0, 9.04, 9.1, 9.2, 10.1
Mac OS 8.6, 9.X, 10.1 or later
CD-ROM drive or Internet connection
Dedicated IEEE 1284-compliant bidirectional parallel port
Electrical specifications
| WARNING:
|
Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. This might damage the printer and void the product warranty.
|
Power requirements
| Requirements
|
110-Volt models
|
220-Volt models
|
|---|
| Power
|
100 to127 V (-10%, +6%) 50/60 Hz (+/- 2 Hz)
|
220 to 240 V (-10%, +6%) 50/60 Hz (+/- 2 Hz)
|
| Minimum recommended circuit capacity for typical product
|
6 Amps |
3 Amps
|
Power consumption
| Average power consumption (Watts)
|
110-Volt models
|
220-Volt models
|
|---|
| Printing (16 pages per minute)
|
464 W
|
463 W
|
| Standby
|
35.6 W
|
37.2 W
|
| PowerSave1
|
35.4 W
|
36.9 W
|
| Off
|
0 W
|
0 W
|
1
PowerSave default activation time is 30 minutes.
Environment specifications
| Factor
|
Recommended
|
Allowed
|
|---|
| Temperature
|
17 to 25 degrees C (62.6 to 77 degrees F)
|
10 to 30 degrees C (50 to 86 degrees F)
|
| Humidity
|
30 to 70% RH
|
10 to 80% RH
|
| Altitude
|
|
0 to 2600 m (0 to 8530 feet)
|
Acoustic emissions
| Description
|
Specification
|
|---|
| Sound power level
|
Per ISO 9296
|
| Printing (17 PPM)
|
L WAd =6.5 bels or less (A) [65 dB (A)]
|
| PowerSave
|
L WAd =5.0 bels or less (A) [50 dB (A)]
|
| Bystander (1 m)
|
Per ISO 9296
|
| Printing
|
L pAm =51 dB(A)
|
| PowerSave
|
L pAm =34 dB(A)
|
Regulatory information
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the instructions, it might cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is located.
Consult a dealer or an experienced radio/TV technician.
|
NOTE:
|
Any changes or modifications to the printer that are not expressly approved by HP could void the user’s authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules. |
Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound manner. This product has been designed with several attributes to minimize impacts on the environment.
Ozone production
This product generates no appreciable ozone gas (O3
).
Energy consumption
Energy Star
This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active.
This product qualifies for ENERGY STAR®
, a voluntary program established by the U.S. Environmental Protection Agency (EPA) to encourage the development of energy-efficient office products.
Figure 2: ENERGY STAR® logo
ENERGY STAR®
is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR®
partner, HP has determined that this product meets ENERGY STAR®
guidelines for energy efficiency.
For more information about ENERGY STAR ®
, go to the EPA's
ENERGY STAR® Web site
(www.energystar.gov) (in English). Paper use
This product’s optional automatic duplex feature (two-sided printing) can reduce paper usage and the resulting demands on natural resources.
Plastics
Plastic parts over 25 grams have markings according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product’s life.
HP LaserJet printing supplies
In many countries/regions, this product’s printing supplies (print cartridges, fuser, and transfer unit) can be returned to HP through the HP Printing Supplies Returns and Recycling Program. An easy to use and free take back program is available in over 48 countries/regions. Multi-lingual program information and instructions are included in every new HP LaserJet print cartridge and supplies package.
HP Printing Supplies Returns and Recycling Program information
Since 1990, the HP Printing Supplies Returns and Recycling Program has collected more than 47 million used LaserJet printer cartridges that otherwise might have been discarded in the world’s landfills. The HP LaserJet printer cartridges and consumables are collected and bulk-shipped to our resource and recovery partners, who disassemble the cartridges. After a thorough quality inspection, selected parts are reclaimed for use in new cartridges. Remaining materials are separated and converted into raw materials for use by other industries to make a variety of useful products.
US returns
- For a more environmentally responsible return of used cartridges and consumables, HP encourages the use of bulk returns. Simply bundle two or more cartridges together and use the single, pre-paid, and pre-addressed UPS label that is supplied in the package. For more information in the U.S., go to
www.hp.com/go/recycle
.
Non-US recycling returns
- Non-US customers should call the local HP Sales and Service Office, or go to
www.hp.com/go/recycle
for more information regarding availability of the HP Supplies Returns and Recycling Program.
Material restrictions
This product does not contain batteries.
This product does not contain added mercury.
This product contains lead in solder.
For recycling information, contact the local authorities, or visit one of the Web sites:
-
-
|
NOTE:
|
One or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside of the HP Web site. |
Material Safety Data Sheet (MSDS)
Extended warranty
HP Care Pack provides coverage for the HP hardware product and all HP-supplied internal components. The hardware maintenance covers a one to five year period from date of the HP product purchase. The customer must purchase HP Care Pack within 90 days of the HP product purchase. For more information, contact the HP Customer Care Service and Support group.
Spare parts and supplies availability
Spare parts and supplies for this product will be available for at least five years after production has stopped.
For more information
Product environmental profile sheet for this and many related HP products
HP’s commitment to the environment
HP’s environmental management system
HP’s end-of-life product return and recycling program
Material Safety Data Sheets
|
|
Printable version
