» Sign-in with HP Passport | » Register
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
Search:
More options
 
hp.com home

HP Support document

» 

Business Support Center

HP Passport Sign-in
User ID:
Password:
» Register
» Learn more...

Tasks for my selected product

» Download drivers and software
» Troubleshoot a problem
» Setup, install, and configure
» Discover and use a product
» Perform regular maintenance
» Upgrade and migrate
» Recycle and dispose
»

Resources for my selected product

» Diagnose problem or Chat (HP Instant Support)
» Support Forums
» Guided troubleshooting
» Manuals
» Frequently asked questions
» Parts information
» See more...
» Help
» Site map
» IT Resource Center

HP iPAQ 200 Series Enterprise Handheld - Using Storage Cards in the Device

Introduction
Use optional storage cards for:
  • Expanding the memory of the HP iPAQ
  • Adding functionality
  • Storing additional data
The micro SD and mini SD cards can also be used with an SD adapter in your HP iPAQ. All standard sized Compact Flash cards can be used in the CF card slot.
NOTE: HP iPAQ 200 Series Enterprise Handheld devices support high-capacity SD (SDHC) cards. The SDHC standard supports up to 32GB of storage.
Figure 1: Supported card types
NOTE: Storage cards must be purchased separately and are not included with your HP iPAQ.
Inserting a storage card
Follow the steps to insert a storage card into the storage card slot on your HP iPAQ:
  1. Locate the storage card slot on the top of the HP iPAQ.
  2. Open the protective cover.
  3. Insert the storage card into the storage card slot and push the connection edge of the card firmly into the storage card slot.
    Figure 2: Inserting a CF card
    Figure 3: Inserting an SD card
NOTE: If your storage card is not recognized, follow the card manufacturer's instructions to install it.
If you have trouble inserting a storage card, try the following:
  • Make sure the label is facing down.
  • Make sure you are not inserting the card at an angle.
  • Make sure you insert the connection area (the metal area) first.
Removing a storage card
Follow the steps to remove a storage card from the storage card slot on your HP iPAQ:
  1. Close all programs that are using the storage card.
  2. Remove the card from the storage card slot by lightly pushing on the card to unlock it.
  3. When the card disengages and pops out, pull it from the storage card slot.
Viewing content of a storage card
Use File Explorer to view the files that are located on your optional storage card.
  1. Tap Start > Programs > File Explorer .
  2. Navigate to select the Memory Card folder to see a list of files and folders.
If the HP iPAQ does not recognize your storage card, try the following:
  • Make sure you have firmly pushed the storage card into the storage card slot.
  • Make sure to install any drivers that came with the storage card.
NOTE: For more information, check the document - HP iPAQ 210 Enterprise Handheld - SD Compatibility Matrix at www.hp.com/support .

   Content feedback
To help us improve our content, please provide your feedback below.

1. How does the information on this page help you?
   very helpful somewhat helpful not helpful
 

2. Was it easy to find this document?
   easy not easy

3. If you selected not easy for question 2, in which section did you expect to find it?
     

4. Comments:
 
 
- Your feedback will be used to improve our content. Please note this form is for feedback only, so you will not receive a response.
-  Contact HP if you need technical assistance.

Printable versionPrintable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2010 Hewlett-Packard Development Company, L.P.