 |
» |
|
|
|
|
|
|
|
|
HP Pavilion md5020n, md5820n, md5880n, and md6580n High-Definition Microdisplay TV - Connecting the TV To an Antenna
Introduction
If you are connecting the TV to an antenna and the antenna cable has a standard coaxial connector, connect the cable to the TV as shown below.
Connect the TV to an antenna
|
NOTE:
|
If the antenna has flat, twin-lead cable or other type of cable, connect the antenna cable to a
coaxial adapter, then connect the adapter to the TV antenna input. |
Figure 1: Connecting the TV to an antenna
Find channels when using an antenna
If you have an antenna connected to the antenna input use the following instructions to find channels:
Press Settings
and go to Setup
, Channel setup
, Auto search cable
, and then press OK
.
Wait for the TV to scan all channels available from the antenna.
|
|
Printable version
