 |
» |
|
|
|
|
|
|
|
|
HP Designjet Printers - Accurate Colors from Adobe Photoshop CS (HP-GL/2, RTL and PostScript Driver)
The instructions given below outline one of the many ways to have good control over the printed colors that can be obtained from the printer.
|
NOTE:
|
Before beginning, ensure that the paper type has already been calibrated. |
Application settings (HP-GL/2
and RTL driver)
Open Adobe Photoshop
and select Color Settings
from the Edit
menu.
Working spaces
: The working space is the color space the user wants to use when manipulating the image. It is recommended to use the color space that comes with the image, if any. Otherwise, the recommended default settings are:
Color Management Policies
: Select Preserve Embedded Profiles
.
Rendering Intent
: Rendering intent is one of the settings used when doing a color transformation. Some of the colors to be printed may not be reproducible by the printer. The rendering intent allows the user to select one of the four different ways of handling these colors.
Black Point Compensation
: This option is recommended if the user has chosen the Relative Colorimetric rendering intent.
Figure 1: Color Settings
Open the image. Accept the embedded color profile if there is one:
Figure 2: Selecting the Embedded Color Profile
Otherwise accept the default that Adobe Photoshop proposes:
Figure 3: Accepting Adobe Photoshop's default profile
Once the color space in which to work has been defined, a soft proof can be made if desired. This means emulating on the screen how the image will look when printed. To do this, an ICC profile is required for the monitor.
Select View
then select Proof Setup
and then Custom
. Use
the following information to select options in the Proof Setup window:
Profile
: Choose the profile based on the printer model and paper type intended to be used.
Preserve Color Numbers
: This checkbox tells the application how to simulate the
document's appearance without converting colors from the Document Space to the Proof
Profile Space. It simulates the color shifts that may occur when the document's color
values are interpreted using the Proof Profile instead of the Document Profile. This option
is not recommended.
Intent
: This menu allows to choose a rendering intent for the conversion from
document space to simulation space, letting the user preview the effects of different renderings.
Use Black Point Compensation
: This option is recommended if the
'Relative Colorimetric' rendering intent has been chosen by the user.
Paper White
: This checkbox emulates the whiteness of the paper on the monitor. The
effect is the same as using the 'Absolute Colorimetric' rendering intent.
Ink Black
: This checkbox turns off the black point compensation for the rendering from
simulation to the monitor. So, if the simulation space black is lighter than the monitor black,
the user will see the washed-out blacks on the monitor. This option is not recommended.
Preview
: If this checkbox is enabled (recommended), the changes that the user makes in this
window are reflected in the image immediately.
Figure 4: Proof Setup window
When ready to print the image, open the Print with Preview
window from the File
menu.
In the Color Management
tab, select the following:
Source Space
: 'Document' (automatically assigned for the user).
Profile
: Select the profile that is desired to be used. HP recommends using Adobe RGB. If neither Adobe
RGB nor sRGB is selected, then choose the appropriate ICC profile for the paper loaded.
Remember to select later on in the driver, the option 'Managed by Application.'
Intent
: Set the rendering intent.
Figure 5: Selecting Source Space and Print Space
Driver settings (HP-GL/2
and RTL driver)
In the Paper/Quality
tab (Microsoft Windows operating system) or Image Quality
panel (Macintosh operating system), set Print Quality
to Best
.
In the Color
tab (Microsoft Windows operating system) or Color Options
panel (Macintosh operating system), the following Color
Management options are available. Select the same option that was selected in the Print
dialog box above (Print
Space section, Profile option).
sRGB
: This is the default color space. The input RGB data are converted to CMYK using the
printer's internal color maps, which depend on the paper type and print quality selected. These
are the most versatile' color maps, producing saturated colors for CAD and Microsoft Office applications
and also producing good results with photographic images.
AdobeRGB
: Similar to sRGB, but using the AdobeRGB to CMYK internal color maps, which are
designed for AdobeRGB input data having a bigger source gamut. Best suited for digital
photography.
Managed by Application
: The driver will not perform any color correction. This path can be
used when building custom RGB printer profiles and applying them within the application (the
application is responsible for applying the right color management by using the custom RGB
printer profiles). In this case, ensure that the right media profile in the 'Print Space, Profile' option in the application print command, has been selected.
Figure 6: DJP 4000ps HPGL2/RTL Properties
Printer settings (HP-GL/2
and RTL driver)
Ensure that the paper type setting on the front panel corresponds to the paper that is intended to be used.
Getting accurate colors from Adobe Photoshop CS
and the PostScript driver
The instructions given below outline one of the many ways to have good control over the printed colors that can be obtained from the printer.
|
NOTE:
|
Before beginning, ensure that the paper type has already been calibrated. |
Application settings (PostScript driver)
Open Adobe Photoshop and select Color Settings
from the Edit
menu (Microsoft Windows operating system) or from the
Photoshop
menu (Macintosh operating system).
Working spaces
: The working space is the color space the user wants to use when manipulating the image. It is recommended to use the color space that comes with the image, if any. Otherwise, the recommended default settings are:
Color Management Policies
: Select Preserve Embedded Profiles
.
Rendering Intent
: Rendering intent is one of the settings used when doing a color transformation. Some of the colors to be printed may not be reproducible by the printer. The rendering intent allows the user to select one of the four different ways of handling these colors.
Black Point Compensation
: This option is recommended if the Relative
Colorimetric rendering intent has been chosen .
Figure 7: Color Settings
Open the image. Accept the embedded color profile if there is one:
Figure 8: Selecting the Embedded Color Profile
Otherwise accept the default that Adobe Photoshop proposes:
Figure 9: Accepting Adobe Photoshop's default profile
Once the color space in which to work has been defined, a soft proof can be made if desired. This means emulating on the screen how the image will look when printed. To do this, an ICC profile is required for the monitor.
Select View
then select Proof Setup
and then Custom
. Use
the following information to select options in the Proof Setup window:
Profile
: Choose the profile based on the printer model and paper type intended to be used.
Preserve Color Numbers
: This checkbox tells the application how to simulate the
document's appearance without converting colors from the Document Space to the Proof
Profile Space. It simulates the color shifts that may occur when the document's color
values are interpreted using the Proof Profile instead of the Document Profile. This option
is not recommended.
Intent
: This menu allows to choose a rendering intent for the conversion from
document space to simulation space, letting the user preview the effects of different renderings.
Use Black Point Compensation
: This option is recommended if the
'Relative Colorimetric' rendering intent has been chosen by the user.
Paper White
: This checkbox emulates the whiteness of the paper on the monitor. The
effect is the same as using the 'Absolute Colorimetric' rendering intent.
Ink Black
: This checkbox turns off the black point compensation for the rendering from
simulation to the monitor. So, if the simulation space black is lighter than the monitor black,
the user will see the washed-out blacks on the monitor. This option is not recommended.
Preview
: If this checkbox is enabled (recommended), the changes that the user makes in this
window are reflected in the image immediately.
Figure 10: Proof Setup window
When ready to print the image, open the Print with Preview
window from the File
menu.
In the Color Management
tab, select:
Source Space
: 'Document' (automatically assigned for the user). This is the color space in
which the user had been working while editing the image.
Profile
: Select PostScript Color Management
(if this option is unavailable, select Printer
Color Management
). With this option, the application tells the driver which source profile
and rendering intent should be used for the conversion to the print space. In this case, the
driver will use the 'Document' profile and the rendering intent selected below. The driver's
Input Profile and Rendering Intent settings are overridden.
Intent
: Set the rendering intent.
Figure 11: Print with Preview window
Driver settings (PostScript driver)
The application's PostScript Color Management option will override the color settings of the driver
(Input Profile and Rendering Intent). In this case, the driver will use the application's 'Document'
profile and selected rendering intent. Then, the user has only to select the following in the driver:
In the Paper/Quality
tab (Microsoft Windows operating system) or Image Quality
panel (Macintosh operating system), set Print Quality
to Best
.
In the Color
tab (Microsoft Windows operating system) or Color Options
panel (Macintosh operating system), check the Automatic PANTONE
Calibration
or HP Professional PANTONE Emulation
box.
Printer settings (PostScript driver)
Ensure that the paper type setting on the front panel corresponds to the paper intended to be used.
|
|
Printable version
