 |
» |
|
|
|
|
|
|
|
|
HP Color LaserJet 4700 Printer Series - How to Install an HP Jetdirect Print Server Card
To order the HP Jetdirect Print Server Card through the embedded Web server, select the part numbers to be ordered and
follow the instructions on the screen.
HP Jetdirect Print Server Card part numbers
| Part number
|
Type/size
|
|---|
| J7934A |
HP Jetdirect 620n fast Ethernet print
server
|
| J7960A
|
HP Jetdirect 625n Gigabit Ethernet
print server |
| J7951A |
HP Jetdirect ew2400 wired/wireless
print server (external)
|
The HP Jetdirect print server can be installed in an open EIO slot.
To install an HP Jetdirect print server card
Turn the printer off.
Figure 1: Turning off the printer
Disconnect all power and interface cables.
Figure 2: Disconnecting all power and interface cables
Locate the formatter board in the rear of the printer.
Figure 3: Locating the formatter board
Locate an open EIO slot. Loosen and remove the two retaining screws holding the cover for the
EIO slot, and then remove the cover. These screws and the cover will not be needed again. They
can be discarded.
Figure 4: Removing the screws holding the cover for the EIO slot
Firmly insert the HP Jetdirect print server card into the EIO slot.
Figure 5: Inserting the HP Jetdirect print server card into the EIO slot
Insert and tighten the retaining screws that came with the print server card.
Figure 6: Tightening the screws that came with the print server card
Connect the network cable.
Figure 7: Connecting the network cable
Reconnect the power cable, and turn the printer on.
Figure 8: Reconnecting the power cable
Print a configuration page (see
Configuration page
). In addition to a printer configuration page
and a Supplies Status page, an HP Jetdirect configuration page that contains network
configuration and status information should also print. If the printer does not print, uninstall and reinstall the print server card to ensure that it is
completely seated in the slot.
Perform one of these steps:
Choose the correct port. See the computer or operating system documentation for
instructions.
Run the printer installation software again, choosing the network installation this time.
|
|
Printable version
