 |
» |
|
 |
|
 |
 |
 |
|
|
HP LaserJet Pro P1102 and P1102w Printers - Replacing the Cartridge
Replace the print cartridge
When a print cartridge approaches the end of useful life, you can continue printing with the current cartridge until redistributing the toner no longer yields acceptable print quality.
Contextual Wrapper
Click this link,
HP Home & Home Office Store
(US only), and then click Ink Toner & Paper
to purchase cartridges or check cartridge compatibility for your printer.
If you are located outside of the US, follow these steps to purchase cartridges using HP SureSupply.
-
Scroll to the bottom of the page and make sure that the country or region location is correct.
Which cartridges you use depends on your country or region. Follow these steps to purchase cartridges or check cartridge compatibility for your printer using HP SureSupply.
-
Scroll to the bottom of the page and make sure that the country or region location is correct.
Open the print-cartridge door, and then remove the old print cartridge.
Figure 1: removing the print cartridge
Remove the new print cartridge from the packaging. Place the used print cartridge in the bag and box for recycling.
| CAUTION:
|
To prevent damage to the print cartridge, hold the print cartridge at each end. Do not touch the cartridge shutter or the roller surface. |
Grasp both sides of the print cartridge and gently rock the print cartridge to distribute the toner evenly inside the cartridge.
Figure 2: shaking the print cartridge
Bend the tab on the left side of the cartridge until the tab breaks loose, and then pull the tab until all the tape is removed from the cartridge. Place the tab and tape in the print-cartridge box to return for recycling.
Figure 3: removing the sealing tape
Insert the print cartridge in the product, and then close the print-cartridge door.
Figure 4: inserting the print cartridge
| CAUTION:
|
If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric
. |
|
|