| Processor2
|
Six core processors
1
|
| Upgradeability |
Upgradeable to two processors |
| Chipset |
Intel 5520 chipset |
| Cache memory |
12MB Level 3 cache
4MB Level 3 cache
|
| Memory protection |
|
| Memory |
| Type
|
DDR3 registered (RDIMM) or Unbuffered (UDIMM)
|
|---|
Standard (Entry models)
|
4GB (1 x 4GB) RDIMMs
|
| Maximum (RDIMM) |
288GB (18 x 16GB) |
| Maximum (UDIMM) |
48GB (12 x 4GB) |
|
| Network controller |
HP NC362i integrated dual port gigabit server adapter |
| Storage controller |
|
| Storage |
| Optical drives
|
| DVD-ROM |
SATA 9.5 mm DVD-ROM drive, slim (optional) |
| DVD RW |
SATA 9.5 mm DVD RW drive (optional) |
| Diskette drives |
Via USB only |
| Drive bays
|
| Non-Hot plug SATA |
Up to 4 Non-hot plug SATA 3.5 in drives |
| Hot plug SATA/SAS |
Up to 4 Hot plug SAS/SATA 3.5 in drives |
|
| Maximum internal
storage |
| Non-Hot plug LFF SATA |
8.0TB (4 x 2TB) |
| Hot plug LFF SATA |
8.0TB (4 x 2TB) |
| Hot plug LFF SAS |
8.0TB (4 x 2TB) |
| Hot plug SFF SATA |
4.0TB (8 x 500GB) |
| Hot plug SFF SAS |
4.0TB (8 x 500GB) |
|
| Interfaces |
| Parallel |
None |
| Network RJ-45 (Ethernet) |
2 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP
ProLiant Lights Out 100i Remote Management) |
| Serial |
1 |
| Pointing device (Mouse) |
0 (via USB only) |
| Graphics |
1 |
| Keyboard |
0 (via USB only) |
| USB5
|
5 (two front, one internal, two rear) |
|
| Graphics |
32MB shared supporting all display resolutions up to 1600 x 1200 16bpp @ 75 Hz |
| Form factor |
Rack (1U)
(44.5 mm/1.75 in)
|
| Industry standard
compliance |
|
| Security |
|
| Server power cords6
|
One 6 in Highline (IEC-IEC) power cord ships standard |
| Power supply7
|
|
| System fans |
|
|
NOTE:
|
1:
Available through Configure To Order only. See Factory Integration Models section for more details.2:
HT indicates that the processor model supports Intel Hyper-Threading Technology.Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost
Technology, with 4, 3, 2, and 1 cores active.DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower wattage.3:
Embedded SATA controller support transfer rate up to 3 Gb/s. To enable RAID for embedded SATA controller, use EZ set-up CD to
download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup
CD.
Click here to view SW smart array details
.A diskette drive or virtual FDD using LO100 Advanced Pack is
needed to install storage controller drivers during a Windows operating
system installation from a CD.The addition of a Smart Array hardware based storage controller to a
Non-Hot Plug SATA Model is only supported for external storage. Non VMware Support for software RAID. A Smart Array controller
with hw RAID must be used to support ESX.4:
Support transfer rate up to 6 Gb/s SAS or 3 Gb/s SATA HP Smart
Array P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0).Support transfer rate up to 6 Gb/s SAS or 3 Gb/s SATA.Available upgrades: P410 with FBWC, 256MB with BBWC, 512MB with FBWC, Battery kit.5:
In order to connect a USB device internally, the internal USB Cable
G6 Kit must be used (536769-B21).6:
HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that
allow connection to 110 V US wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only a PDU power cord
(416151-B21). If a user wishes to power a ProLiant DL server using a 110 V receptacle (NEMA-15), the
NEMA power cord (227099-001) must be ordered separately.7:
Factory upgradeable to high-efficiency (HE) pluggable power supply. |
|
Printable version
