| Processor Board
|
- Processor cores: 1-4
- Module type Dual core and Single core
-
Front-side bus: 533 MHz
- Chipset: HP zx2
|
| Dual-core Processor Modules
|
- Type: Intel Itanium 2 processor
-
Speed: 1.6 GHz /18 MB Intel Itanium 2
- Speed: 1.4 GHz/12 MB Intel Itanium 2
-
Level 1 cache: 32 KB
- Level cache 2:
1 MB instruction/256 KB data per core
-
Level 3 cache: 18 MB (9 MB per core)
|
| Single core Processor Modules
|
- Type: Intel Itanium 2 processor
- Speed: 1.6 GHz/6 MB Intel Itanium 2
- Level 1 cache: 32 KB
- Level cache 2:
1 MB instruction/256 KB data per core
- Level 3 cache: 6 MB
|
| Main memory
|
-
RAM type: Chip spare ECC x4 single rank Registered DDR2 SDRAM
- RAM minimum/maximum: 1 GB/32 GB
- Memory protection: Error checking and correcting (ECC) on memory and caches; double chip spare
|
| Internal storage devices
|
- Internal hard drive bays: 8 hot-plug Small Form Factor Serial Attached SCSI (SAS)
- Hard drive capacity: 36 GB, 73 GB, and 146 GB Small Form Factor Serial Attached SCSI (SAS) drives available
-
Removable media: 1 open bay for DVD-ROM or DVD+RW Drive
-
Storage controller: 8-port Serial Attached SCSI (SAS) controller supports internal devices only.
|
NOTE:
|
Windows systems must order Smart Array SAS P400 RAID Controller. Smart Array SAS P400 RAID controller is optional for HP-UX, OpenVMS, and Linux. |
|
| I/O slots
|
Choice of one of two options:- All PCI-X Card Cage: 3 full-length PCI-X slots (2 - 266 MHz/64-bit, 1 - 133 MHz/64-bit) for 5.3 GB/s of I/O bandwidth (total bandwidth with core I/O is
7.0 GB/s)
- Combination Card Cage: 3 full-length slots (2 PCI Express slots - 2.6 GB/s of bandwidth each, and 1 PCI-X slot - 133 MHz/64-bit) for a total of 6.3 GB/s of
I/O bandwidth (total bandwidth with core I/O is 8.0 GB/s)
|
| Interfaces
|
- VGA and 3 USB ports for local human interface
- 1 RS-232 serial port for general use
- 1 RS-232 serial port and 10/100Base-T LAN for Integrated Lights Out (iLO 2)
management
|
| Form factor
|
Rack-optimized with 2U height; standalone (rack-less) form factor kit |
| Specifications
|
| Environmental Temperature
|
- Operating: +5o
to +35o
C (+41o
to +95o
F)
-
Non-operating: -40o
to +70o
C (-40o
to +158o
F)
- Maximum rate of temperature change: 36°F (20°C) per hour
|
| Environmental Humidity
|
Operating: 15% to 80% relative non-condensing
Non-operating: 8% to 85% non-condensing |
| Environmental Altitude
|
- Operating: 10,000 ft. (3,000 m) maximum
-
Non-operating: 15,000 ft. (4,600 m) maximum
|
| Physical dimensions (Rack form factor)
|
- Height: 12 in. (3058 mm)/7U EIA
-
Width: 17.32 in. (440 mm)
-
Depth: 27.4 in. (696 mm)
|
| Physical dimensions
|
Rack form factor- Height: 3.4 in. (86 mm) 2U EIA
-
Width: 19.0 in. (482 mm)
-
Depth: 26.5 in. (672 mm)
Pedestal form factor
- Height: 20.2 in. (512 mm)
- Width: 10.8 in. (275 mm)
- Depth: 27.1 in. (688 mm)
|
| Net weight
|
- Maximum configuration Rack form factor: 62 lbs. (28 kg)
- Maximum configuration Pedestal form factor: 87 lbs. (40 kg)
|
| Power requirements
|
- Maximum configuration: 798 W
- Maximum configuration at idle: 567 W
|
| Power supply
|
Maximum output: 800 W at 90 V to 132 V AC input/1000 W at 180 V to 264 V AC input |
| Regulatory
|
Regulatory model number: RSVLA-0503 |
Printable version
