Model numbers

Description	Model number
HP Designjet 430 printer (D/A1 size)	C4713A
HP Designjet 430 printer (E/A0 size)	C4714A

Serial number location

When looking at the back of the printer, the serial number is located on the right side of the rear panel, directly above the power cord.

Printer description

The HP Designjet 430 printer is a monochrome, large format, Inkjet printer that provides ease of use through features like improved media handling and a new front panel. It offers a new monochrome draft print mode to increase throughput.

Printer features

The HP Designjet 430 supports HP-GL, HP-GL/2, HP-RTL, PJL and includes AutoCAD drivers. Additional features include:

• HP ZoomSmart scaling technology
• Tabletop design with optional legs
• Optional roll feed with integrated automatic cutter
• Optional color upgrade kit
• Near photo-quality images
• Excellent line quality

I/O interface

RS-232 and bidirectional with ECP mode (IEEE-1284) built in, Input-Output switching.

Recommended cables

HP IEEE-1284 Compliant Bitronics Parallel cable

C2951A

Resolution

	Print Color as Grayscale	Print Color as Color (450C/455CA)
Fast Print Quality	300 x 300 dpi	300 x 300 dpi **
Other Print Qualities	600 x 600 dpi *	300 x 300dpi **

* Except for glossy media types (in which case it is 300 dpi).

** Except for black with HP RTL, where the resolution is 600 x 600 dpi.

Media specifications

The following media are supported by the HP Designjet 430 printer.

HP Designjet 430 Papers and Films	610 mm (24 inch)	914 mm (36 inch)
HP Bright White Inkjet Paper	C1860A	C1861A
HP Translucent Bond	C3860C	C3859A
HP Vellum	C3862A	C3861A
HP Natural Tracing Paper	C3869A	C3868A
HP Clear Film	C3876A	C3875A
HP Matte Film	51642A	51642B
HP Coated Paper	C6019B	C6020B
HP Heavyweight Coated Paper	C3880A	C3879A
HP Heavyweight Coated Paper	C6021B	C6022B

Roll media should have an inner core diameter of 2 inches and an outer core diameter of 2.125 inches. The maximum diameter of the rolls is 3.8 inches. Roll widths can be 24 or 36 inches.

Media handling

Ink

Ink Cartridge	Part Number
Black	51640A

• The combination of the HP ink cartridge and HP papers and films provides superior print quality, short drying times, and high quality. Ink cartridges and printheads other than Hewlett-Packard do not work in this printer.
• Expect to print approximately 20 A0/E-sized prints when printing on coated paper.
• Maximum ink in each cartridge is about 42 ml.
• HP cannot guarantee optimum print quality after the date printed on the print cartridge.
• HP does not recommend using refilled print cartridges in HP Inkjet printers.

Memory

Standard	4 MB
Maximum	36 MB

The memory capacity of the HP Designjet 400 series printer is 36 MB. Four (4) MB of memory are built-in RAM on the main board. The remainder is available through one SIMM (single inline memory module) slot that can take either a 4 MB, 8 MB, 16 MB, or 32 MB SIMM card. The second SIMM socket is intended for code upgrades.

The HP Designjet 400 series printer is shipped with 4 MB of RAM on the main board as standard. Available memory is reduced by approximately 2 MB of "overhead" requirements; for example, stack space, the I/O buffer, and variable storage. A rough estimate of the ratio of user-to-DJ400 file storage is 0.8:1. File expansion in the HP Designjet 400 series printer buffer depends largely on file content. Labels, polygons, line widths greater than 1 mm, and raster data are examples of memory-eaters.

When receiving a print, the HP Designjet 400 series printer stores all the vector data and raster data in the memory buffer. If the buffer is full, remaining vector data is read in and discarded. If sending all raster data, the buffer is filled, then printed; plotting continues in this way until the print is complete.

Performance

A1/D-size, Mono CAD drawing, HP Opaque Bond

Print Quality	Time
Fast	1:36
Normal	3:46
Best	5:02

Reliability

Recommended maximum number of prints per day

20*

*medium density E/A0-size CAD print

Physical specifications

HP Designjet 400 Series Printers	Without Roll-Feed and Legs	With Roll-Feed	With Legs
Height E/A0-size D/A1-size	13.1 inches (332 mm) 13.1 inches (332 mm)	16.4 inches (415 mm) 16.4 inches (415 mm)	46.0 inches (1165 mm) 46.0 inches (1165 mm)
Depth E/A0-size D/A1-size	9.1 inches (231 mm) 9.1 inches (231 mm)	14.0 inches (355 mm) 14.0 inches (355 mm)	9.1 inches (231 mm) 9.1 inches (231 mm)
Length E/A0-size D/A1-size	52.4 inches (1329 mm) 40.6 inches (1031 mm)	52.4 inches (1329 mm) 40.6 inches (1031 mm)	52.4 inches (1329 mm) 40.6 inches (1031 mm)
Weight E/A0-size D/A1-size	68.2 lbs. (31 kg) 57.2 lbs. (26 kg)	Contact HP	Contact HP

Electrical specifications

Category	Specification
Input Voltage*	100 to 240 Volts alternating current (VAC) +/- 10%
Frequency	47 to 63 Hertz (Hz)
Power Consumption	70 watts maximum (2.0 Amperes maximum)

Environmental specifications

Category	Specification
Operating Temperature	59 to 95 degrees Fahrenheit (F) 15 to 35 degrees Celsius (C)
Non-Operating Temperature (storage)	-40 to 158 degrees F without cartridges -40 to 70 degrees C without cartridges
Acoustics	Plotting: 45 deciBels Idle: <20 deciBels
Relative Humidity	5 to 95 percent at 104 degrees F, non-condensing

General warranty statement

One year onsite warranty

Safety certifications

Category	Specification
Safety Certifications	IEC 950, EN60950, CSA C22.2 No.950, UL 1950, NOM-019-SCFI-1993
EMC Certifications	CISPR22: Class B, EN 50082-1, IEC 801-2, IEC 801-3, IEC 801-4, FCC Part 15 - Class B/DOC-B/VCCI-2/RRL-A